Top Decking Pannel Board

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (50-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

Myard Universal Hidden Deck Fastener Clips for Grooved Edges of Composite Decking Boards to Joists, 1/4' Gap Spacing, with Square Driver Bit (100-Pack)

  • ... + Dacromet black coating) are included. Saving time and money. ▼ Made of anti-UV engineering Nylon plastic. No corrosion. ▼ Includes 1 Square Driver Bit: Size 0.09″ x 0.09″ (2.3mm x 2.3mm).
  • ▼ Clean-look and consistent 1/4″ deck board spacing. No more predrilling and countersinking. ▼ Decking grooved edges “C” opening must be 0.15″ or bigger..
  • ▼ Compatible with AZEK, Cali-Bamboo, Deckorators, DuraLife, Envision, EverNew, Fiberon, MoistureShield, Lumberock, TimberTech, Trex, WearDeck, Zuri branded edge-grooved composite, hardwoods, treated lumber, cedar, & vinyl deck boards..
  • ▼ INSTALLATION: (1) Insert a Myard hidden fastener clip into the grooved edges of decking over a joist. (2) Drive the screw ONLY halfway (Fully tighten later once all boards are in place). The wings must remain level with the joist for the next board to fit correctly. (3) Continue to add clips on each joist against deck boards..
  • ▼ INSTALLATION: (4) Install “next” boards, make sure boards are pressed firmly against the clips and secured under the wings. (5) Do NOT over-tighten the screws. Please set proper driver torquing (2 to 6 drill power). The screw head will be resting on the top of the clip, but not sinking into the clip..
Check Stock

2 Pcs EVA Foam Boat Flooring Decking Sheet Self-Adhesive Marine Carpet Yacht Kayak Decking Sheet Non-Skid Surfboard Traction Pad SUP Paddle Board Swimming Pool

  • Premium EVA Foam ----- This boat decking flooring self adhesive pad are made from high quality EVA foam, has advantages of good cushioning, sound & shock absorption, non-skid. It is high tensile elongation, not easy deformation or damage, safe and can be durable for a long time ( Thickness: 6mm eva foam decking sheet).
  • Feature ----- EVA foam boat flooring sheet feature with diamond grooves, can increase friction and play a good anti-skid, also can quickly guide rainwater out if it rains. EVA foam boat decking sheet provide exceptional comfort and traction, whether dry or wet.
  • Easy to Install ----- Boat flooring decking sheet has strong glue at the back, self-adhesive to install boat flooring to the floor surface. It is also can be freely cut to a suitable size, eva foam boat decking flooring fit the different shapes of decks.
  • Wide Application ----- EVA foam boat decking sheet perfect for boat decking flooring, RV flooring, kayak decking, yacht floor, floating dock, golf cart, swimming pool, boat trailer, surfboard, traction pad, motorboat, boat flooring decking, marine deck, car flooring or other place.
Check Stock

Duo Fast, Pneumatic 0 Degree Coil Siding Nailer DF22C, 502950, Air Compressor Powered

  • Powerful Performance - Possesses high load coil capacity and switchable trigger, easily changes from bump to sequential with no tools..
  • Durable - Metal belt hook withstands the toughest job site and provides long-lasting use..
  • Lightweight - Only 4.5 lb. helps minimize arm fatigue..
  • Reliable - Tool-free adjustable depth of drive.
  • drives flush every time, no need to go back and caulk..
  • Versatile Application - Great for Hardie Board siding, fiber cement siding, wood fiber siding, cedar board siding, fencing, and decking..
Check Stock

GRK RSS3810HP RSS HandyPak 3/8 by 10-Inch Structural Screws, 50 Screws per Package

  • Creates a 3/16-inch gap between deck boards.
  • Each deck clip on the TurboClip stick comes preloaded with a stainless steel screw.
  • Simply insert the TurboClip into the side groove of your decking board, drive the preloaded screw through the TurboClip and into your deck support, then snap off the remaining TurboClip stick.
  • Cut your deck board installation time by up to 60-percent, saving you valuable hours and money.
Check Stock

Tool Deck Fastener Pro Edge

  • For installation of treated wood decking and other softwood lumber.
  • No-gap spacing or can be used with spacers for any size gap.
Check Stock

BalanceFrom Easy Walk-Thru Safety Gate for Doorways and Stairways with Auto-Close/Hold-Open Features

  • Fits opens up to 196 inch, at 30 inch high.
  • Easy Installation and Multiple Function - convert from wide opening gate to 8-pannel play place.
  • Convenience - Each pannel is adjustable to accommodate any size of openings.
  • Durability - All steel gate is durable and convenient with a walk-through door. The gate is fully compliant with all USA Safety standards.
Check Stock

WoodPro Fasteners ST516X4B 5/16-Inch by 4-Inch Length Round Washer Head Exterior Wood Screws, 250-Pack , Gold

  • Creates a 1/4″ Gap between deck boards..
  • Each deck clip on the TurboClip stick comes preloaded with a stainless steel screw.
  • Simply insert the TurboClip into the side groove of your decking board, drive the preloaded screw through the TurboClip and into your deck support, then snap off the remaining TurboClip stick.
  • Cut your deck board installation time by up to 60% - saving you valuable hours and money.
Check Stock

Dock Edge + Inc. ProDock Commercial Grade Heavy P Dock Bumper Profile, 3-8-Feet Sections

  • Ideal for use in marinas and commercial applications.
  • Heavy wall composition allows for a universal use.
  • Molded in mounting groove for easy installation.
  • Top flange designed to mount over decking board.
  • Rib design keeps integrity of the profile.
Check Stock

Hjdeck Boat Flooring EVA Foam Boat Decking Self Adhesive Camo Non Slip Deck Grip Pad Marine Carpet for Yacht, Kayak Decking, Surfboard Traction Pad, SUP Paddle Board, RV Flooring, Motorboat, Golf Cart

  • Premium EVA Foam Boat Decking ----- This boat decking flooring are made from high quality EVA foam, has advantages of good cushioning, sound & shock absorption. It is high tensile elongation, boat deck mat is not easy deformation or damage, safe and can be durable for a long time.
  • Non-Slip Traction Pad ----- EVA foam boat flooring sheet feature with diamond grooves, can increase friction and play a good anti-skid, also can quickly guide rainwater out if it rains. EVA foam boat decking sheet provide exceptional comfort and traction, whether dry or wet.
  • Camouflage EVA Foam Sheet --- Unique camo, making your boat deck special. This self adhesive boat decking marine decking is EASY TO CLEAN with vacuum cleaner or be pressure washed.
  • Easy to Install ----- Boat flooring has strong glue at the back, self-adhesive to install marine carpet to the floor surface. EVA foam marine flooring decking is also can be freely cut to a suitable size, eva foam boat decking camo fit the different shapes of decks.
  • Wide Application ----- Sea deck boat flooring perfect for boat flooring, RV flooring, ka....
Check Stock

Orgrimmar Acrylic Jewelry Storage Box Earring Display Stand Organizer Holder with 3 Vertical Drawer Transparent

  • HIGH QUALITY MATERIAL--- It is made of durable top quality clear acrylic.
  • The product dimension: 5.1 X 5.1 X 7.1 Inch (13 X 13 X 18 cm).
  • ATTRACTIVE,STYLISH AND DURABLE --- Three drawers can pull out easily, it is convenient for you to take out what you need in a hurry morning..
  • ERARING ORGANIZER --- Acrylic earring organizer is used to store and organize all sorts and sizes of earrings, great way to keep earrings stored and....
  • DUST-PROOF DESIGN --- Keep your precious jewellery free from dust and tangles with this neat and stylish Necklace Organiser..
  • LARGE STORAGES --- Contains 3 pannels and each pannel has 74 holes. So it can hang 37 pairs of earrings in each pannel. In total, the box has 222....
Check Stock

CAMO EDGEXMETAL Clip Hidden Deck Fasteners (450 ct)

  • For any angled installation of grooved decking—hardwood, composite, capped composite, and PVC.
  • Works with any 14–18GA metal framing, including Fortress Evolution and Trex Elevations.
  • Fasten EDGEXMETAL Clips with the included NEVER-MISS Guide or with the CAMO DRIVE stand-up tool using a drill—do not use an impact driver.
  • Up to 88% stronger than leading deck board manufacturer’s clips in lateral movement tests.
  • 450 count covers approximately 250 square feet (23m2) and creates a 3/16-inch (4.7mm) gap.
Check Stock