Top Delay Switch

ENERLITES PIR Motion Occupancy Vacancy Motion Sensor Light Switch, 500W, 5A, Motion Sensor Night Light, Single-Pole, Smart LED Backlight, Neutral Not Required, Ground Required, HMOS-J-W, White

  • Motion detector light switch replaces standard switch, automatically turns connected load ON / OFF based on motion detected.
  • Smart LED backlight will turn on when motion is detected for easy location in the dark in vacancy mode.
  • Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs.
  • Time delay options: 15 sec (Test), 15 min, 30 min. Motion sensor will turn off after the delay time is up. Single pole use only. Not for three-way wiring.
  • Neutral wire not required, ground wire required for installation. 120-277VAC, CFL/LED: 150W, incandescent/halogen: 500W, motor: 1/8HP. Motion sensor wall switch ranges 180 Degree, 700 sq. ft. coverage. Operating temperature (32 – 131°F). UL listed.
Check Stock

TOPGREENER Dual Tech Humidity Sensor Switch, Infrared PIR Motion & Air Moisture Detection, Bathroom Fan & Light Control, Adjustable Timing, Neutral Wire Required, UL Listed, TDHOS5, White

  • FAN TIMER SWITCH Dual-tech in-wall humidity control switch that controls both bathroom fan and light simultaneously. Dual technology of passive infrared (PIR) motion sensor switch and humidity sensor switch for fan. Automate light and exhaust fan control to keep you hands-free..
  • BATHROOM FAN OCCUPANCY DETECTOR Converts bathroom ventilation fan control wall switch with this smart humidity control switch, turning fan ON automatically when humidity exceeds preset level and turning OFF as it drops to normal to eliminate excess humidity.
  • HUMIDITY SENSOR SWITCH features simple controls and operates in two modes: Occupancy Mode (auto on/off lights, auto on/off fan), and Vacancy Mode (manual on/ auto off lights, auto on/off fan). Adjustable time delay and humidity level.
  • MOTION SENSOR Two single pole switches to control bathroom light and fan separately.
  • Energy savings of up to 40% with motion sensing control.
  • 4 time delay settings from 15 sec to 30 min.
  • 120VAC, 3A fan/motors, 500W incandescent/halogen, 150W CFL/LED.
  • Up to 600 sq.ft coverage, 180 degree field of view.
Check Stock

UCTRONICS DC 12V Time Delay Relay Module with Plastic Enclosure, On Delay and Off Delay for Automobile, Raspberry Pi, Industrial Control, and Other Electronic Projects

  • Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
  • Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
  • Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
  • Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..
  • You'll Be Getting: A time delay relay module U6031, 2 pieces of protective case and 2 mounting screws.
  • the plastics case keep the module free from dust and water, which is available for more applications than the separate module..
Check Stock

EarthQuaker Devices Avalanche Run V2 Stereo Reverb & Delay with Tap Tempo Guitar Effects Pedal

  • New custom-built enclosure, Flexi-Switch silent relay based switching for traditional latching or momentary operation, and updated reverb algorithm....
  • A dreamy sonic discovery device with up to 2 seconds of delay time and a lush reverb..
  • Features complete control over delay time, repeats, mix and voice (with the tone control), as well as control over the reverb length and mix.
  • It can run in one of 3 different modes to really play with your tone: Normal, Reverse and Swell.
  • Features an expression jack that can be assigned to one of six different controls using the 'EXP' selector switch.
Check Stock

Pentax Wireless Remote Control C

  • 1. Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds..
  • 2. Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached..
  • 3. BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long..
  • 4. Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times..
Check Stock

Boss DD-8 Digital Delay Pedal

  • Delay Guitar Effect Pedal with 10 Seconds of Delay.
Check Stock

MXR Carbon Copy Mini Analog Delay Effects Pedal (M299)

  • Mini Analog Delay Pedal with 600ms Delay Time.
Check Stock

QUMOX Time Lapse intervalometer Remote Timer Shutter for Canon DSLR 650D 600D 700D Camera

  • 1. Delay / Self Timer (DELAY) : Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments)....
  • 2. Interval Timer (INTVL) : The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one....
  • 3. BULB/Long Exposure (LONG) : It allows you to take time exposures up to 100 hours long..
  • 4. Exposure Count (N) :This setting allows you to set the times of exposures that will be taken, up to a total 399 times. For example, if you set it....
Check Stock

SENCTRL Automatic Vacuum Switch Allow Power Tool/Table Saw To Turn Vac Cleaner/Accessory On And Off Automatically Load Sensing On Delay Prevent Circuit Overload Shop Dust Collector Off Delay

  • NEW GENERATION: Add a manual switch to support three vacuum run modes: Auto, Off and On. You can not only turn the vacuum on/off automatically with the power tools, but also manually turn the vacuum on/off all time according to your actual condition..
  • HIGH-QUALITY MATERIALS: Adopt 19.7 inch UL-certified US standard 14AWG power cord which allow passage with a large current more than 30A. Durable PC+ABS V0 grade flame retardant material case, reduce heat during use and extend service life..
  • TURN ON DELAY. Load Sensing Technology. If the load connected to the 'TOOL' port exceeds 30W, the vacuum connected to the 'VAC' port will automatically delay 1s to start, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time..
  • SHUT OFF DELAY: Automatically delay vacuum turn-off by 7s to continue clearing the remaining airborne debris after the load connected to the 'TOOL' port has stopped. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems..
  • COMPATIBILITY: Support a wide range of cutting tools from handheld devices to large shop saws such as table saw, miter saw, track saw, chop saw, sander, router table, planers, shopvac, remote control outlet, automated vacuum switc....
Check Stock

VIVEFOX Switch Bluetooth Adapter - Bluetooth 5.0 Audio Transmitter Compatible for Nintendo Switch/Lite 3.5mm Audio Adapter with APTX Low Latency Supports Wireless Bluetooth Headphones and Speakers

  • Adding Bluetooth to Nintendo Switch - Vivefox 3.5mm audio Bluetooth adapter perfectly solves the problem of connecting Nintendo Switch with Bluetooth earphones, speakers, headphones. Support two wireless headphones simultaneously, sharing game fun with your partner! (Kindly note: This bluetooth transmitter doesn't fit the switch which is in the dock.).
  • Perfect Match Bluetooth Audio Transmitter - Exclusively compatible with both regular Switch and Switch Lite. Plug and play with no converters needed. Installed securely and perfectly to the Switch or Switch Lite, after paired successfully, will reconnect automatically, so convenient!.
  • Bluetooth 5.0 Stable Connection & aptX Low Latency - Designed with the latest Bluetooth 5.0 chip, lower consumption but much more stable signal! Compatible with every headphone at a powerful range. The adapter transmits audio signals up to 33ft/10m without any interference. Featuring aptX Low Latency technology, allows you to reduce Bluetooth delay, delivering high-quality sound in perfect synchronization.
  • Easy Setup & Dual Pairing - Simple one-button control, plug and play, connect....
Check Stock

Awoco 72 Elegant 2 Speeds 1800 CFM Unheated Alloy Case Commercial Indoor Air Curtain CE Certified 120V Unheated with Shutoff Delay Magnetic Switch for Swinging Doors

  • ... WON’T GENERATE COLD AND HOT AIR. Air curtain is a powerful fan that forcing a high speed air stream over the entrance to isolate the interior and exterior air environment while blocking 90% of Hot or Cold air, dust, and smoke..
  • [Special Edition for Restaurant Kitchen Aluminum Swing Doors] - Shutoff Delay Magnetic switch: New shutoff delay switch keeps the air curtain on for an additional 2 seconds, allowing enough time for swinging doors to completely close. This air curtain has an electrical-magnetic circuit control with a magnetic switch. The magnetic door switch installation is much easier than the traditional mechanical micro switch. No hard wired needed on the 12VDC low voltage magnetic switch..
  • [2 Speeds at Lo/Off/Hi switch] - high speed at 1878 CFM, 55dB low speed at 1482 CFM, 52dB. A HI/LO/OFF switch to select High/Low speed. 110V-120V 60Hz. 600W(0.8HP, 6.25A), less power consumption than other industrial air curtains. Adopting the technology of German electrical machinery, it runs smoothly with reduced low noise. Fan Wheel: German electrical machinery design, made of high-tech ABS, powerful wind-force..
  • [Easy Installation] - Refer to Technical Specification User Manual, installation should be easy. 1) mount the detachable mounting plate....
Check Stock

12V 10A New Custom Wireless Remote Control Switch, 433MHz 1 Channel Remote Control Relay Momentary Switch of Learning Switch Use for Control Lamps/Access Control/Electric Doors etc.

  • ...e is small and the performance is stable and reliable, high receive sensitivity. Resist Interference: It adopts non-directional wireless encoding technology, allowing independent control without mutual interference..
  • 【Long Range】The RF remote control adopts RF technology, stable signal. Signal of the wireless RF switch can pass through walls, floors and doors, steadily control receiver from any place within a reliable distance, Max range is up to 164ft/50m with no obstacle..
  • 【Application scenarios】: This remote control switch widely used in a variety of equipment control.
  • such as LED lamps / courtyard lights control.
  • electric curtains and other intelligent control and security fields..
  • 【5 working modes】we send momentary mode default. There are 5 working modes: Momentary / Toggle / Delay 5 seconds / Delay 30 seconds / Delay 60 seconds. You can change the working mode through the learning button according to your own needs, the operation is very simple and convenient. It is a learning type remote control switch, it is easy to match the transmitter ..
  • 【Easy to Use 】We have made transmitter and receiver working together and test it before ship it,when you get it don't need to do anything ,just install it. as a ....
Check Stock