Top Delta Cruzer Miter Saws

PP Materials Easy to Use Strict Inspections Guaranteed Quality Woodworking Feather Board, Feather(Square feather board B blue)

  • ...helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • ✒【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • ✒【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • ✒【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherboard is a very professional woodworking tool that can be used for flip engraving machines, electric circular saws, table saws, band ....
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Portamate Tool Mounts for Miter Saw Stands and Work Centers PM-7002

  • Attach and detach power tools and machines to tool stands quickly and easily.
  • Works with miter saws, routers, band saws, scroll saws, and many other power tools.
  • Mounts sit flat when not attached to stand and tools can be used on bench or other work surface.
  • Set of 2 power tool mounts work with most Bora Portamate miter saw stands.
Check Stock

Tenryu SL-25580 10\ x 80-Tooth Silencer Series Miter Saw Blade for Finish Cutting

  • New vibration dampening system featuring TENRYU resin filled laser cut body slots.
  • Meticulous, hand hammer plate tensioning for a flatter blade and truer cuts.
  • Unique ATAF Shear face grind for Fast and Long Lasting Cuts.
  • For Slide-Miter Saws, convention Miter Saws, and crosscutting with Portable Saws.
Check Stock

Fortool 48-08-0554 2PC Miter Saw Stand Mounting Brackets Fits For Milwaukee 48-08-0551 Folding Miter Saw Stand, Work With All Brands Of Miter Saws

  • 【Models】40-08-0554 Miter Saw Stand Mounting Bracket, designed to be used with the Folding Miter Saw Stand (48-08-0551).
  • 【Specifications】Miter saw stand mounting brackets, tool accessory category: saws, material: steel, accessory type: miter saw, height (in): 17.5, width (in): 3.0.
  • 【Features】The Miter Saw Mounting brackets allow you to quickly attach and detach a saw from your stand. Each package includes 2 mounting brackets that are designed to work with all brands of miter saws. Brackets allow you to place you saw on a flat surface even when not attached to the stand. Includes saw mounting hardware.
  • 【Easy To Install】Easy to install, save your time and money! The function is equivalent to prior parts.
Check Stock

Deluxe Heavy Duty Rolling Miter Saw Stand with 8 in Wheels 330 Lbs Load Capacity Black and Grey Single Pack WK-MS029E-2

  • FREE PROVIDED EXTRA CROSS SUPPORT :Allow for Miter Saws That The 4 Holes Shape a trapezoid pattern (some saws) and the 3 holes shape triangular (few saws).
  • EXTENDING THE SUPPORT ARMS:Miter Saw Stand extends from 45.6 in to 78.7 in.
  • QUICK-RELEASE MOUNTING BRACKETS: Allow Easy and Secure Mounting of Miter Saw to Stand.
  • RUGGEDLY BUILT DESIGN:330 lbs Load Capacity Adjustable Roller Supports from 35.4 in to 39.3 in.
  • ROBUST RUBBER WHEELS: Two 8 in wheels for for convenient transport around the jobsite.
Check Stock

Evolution - 005-0001 Power Tools EVOMS1 Compact Folding Miter Saw Stand with Quick Release Mounting Brackets, Rollers, and End Stops, Black

  • Quick & easy set up: the folding legs, quick release mounting brackets and support arms that slide into the stand, allow for simple set up, storage and transport.
  • Sturdy & Robust: this miter saw stand can support long workpieces up to 118 inches in length and has a maximum work load of 330lbs.
  • Quick release brackets: quick release mounting brackets allow for fast miter saw removal.
  • Repeat cuts: height adjustable arms with rollers and end stops make quick work of repeat cuts.
  • Fits all Evolution power tool's miter saws, as well as most other brands of miter saws.
  • NOTE: Excludes Skilsaw 12 In. Worm Drive Dual Bevel Sliding Miter Saw.
Check Stock

Milescraft 1406 FeatherBoard for Router Tables, Table Saws and Fences

  • This innovative feather board design provides consistent tension and maximum holding pressure created by unique split rail construction.
  • Pre-load tension design maintains consistent pressure across face of the feather board.
  • 5/8" And 3/4" Metal miter bars fit all standard miter slots.
  • Dual Slide Motion-side to side and forward action for quick and easy setup.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-inch wide miter bars and T-slot bolts for applications on most standard table saws, Router tables, and fences.
  • Split rail miter bar construction-provides maximum hold.
  • Ergonomic knobs help prevent over-tightening and provides non-slip loosening.
  • All mounting hardware included for nearly any operation 3/4 and 5/8-Inch wide miter bars and t-slot bolts for applications on most standard table saws, router tables, and fences.
  • Unique Pre-Load Tension Design-quickly set tension for consistent cuts while reducing the chance of kick-back.
Check Stock

QLOUNI 2 Pack Featherboards, Adjustable Woodworking Safety Device Feather-Loc for Table Saws Band Saws Router Tables Fences Woodworking Tools, 6.3 Inch Extended Table Saw Featherboard

  • ...so helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • 【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • 【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • 【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherboard is a very professional woodworking tool that can be used for flip engraving machines, electric circular saws, table saws, band saws, ....
Check Stock

Premium Hedgehog Push Block for Table Saws and Router Tables

  • 【Compatible with】 Replacement for Bosch /Dewalt /Makita /Ryobi/ Craftsman /Porter Cable/ RIGID/ Metabo/ Kobalt/ Skilsaw/ Delta 10 inch tablesaws, and other table saws that have 2-1/2 inch dust ports on the exterior of the saw..
  • 【Effective Dust Collection】Effective at keeping your work area clear of debris. Provides up to 70% of dust collection..
  • 【Easy to Use】Easy to attach and detach to your table saw. Simply squeeze the spring clamp and slide clamp over tabs on dust port and release spring clamp. The dust bag requires emptying when full of sawdust..
  • 【Package Contents】Pack of 2 miter saw dust bag in vacuum & dust collector accessories..
  • 【After Buying Service】: We are pleasured to help you.Please note that we are always here to help. Please contact us through Amazon if you have any questions or inquiries..
Check Stock

2 Pack Featherboard Double Feather Loc Board Adjustable Woodworking Safety Device Feather-Loc for Stationary Power Cutting Tools Table Saw Radial-Arm Saw Router Table (Blue)

  • ...so helps prevent kickback, binding, and bent blades.The professional featherboard will help you keep safe and feel like being a woodworking master when you are using router, table saw and band saw..
  • 【 Suit for Dual or Tandem Application】: The woodworking Feather Loc Board can be quickly and easily connected to a miter slot or t-slot, and can be DIY according to your needs.Mounting Hardware Included for nearly any dual or tandem application, comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more..
  • 【Two Modes (3/4" + 3/8")】: 4 Miter Bars are suitable for all standard 3/4" and 3/8" T-track.Includes wedge-lock system and T-bolts system that all of them will provide strong fastening.Comes with wedge-lock hardware which works in t-slots or miter slots on tablesaws, router tables, band saws and more, this feather loc board is perfect for woodwork..
  • 【A Must Have for Woodworking】: This unique featherboard can be quickly and easily installed on a miter slot or t-slot. Easy set-up feature increases the accuracy, quality and safety of the cuts.This featherboard is a very professional woodworking tool that can be used for flip engraving machines, electric circular saws, table saws, band saws, ....
Check Stock

Xcalibur Tooling Heavy Duty Tenoning Jig for Table Saw & Cutting Tenons - Versatile & Sturdy Woodworking Tool (Pack of 1)

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock