Top Desk Clamp Mount

Desk Clamp Power Strip USB C,Desktop Mount Surge Protector,40W Fast Charging Station,2 PD 20W USB C Ports,3 Outlets,6FT Flat Plug,Desk Edge Power Strip for Home,Office,Fit 1.6" Tabletop Edge

  • Versatile power dock and USB charger mount to the deck surface with an edge mount bracket for a secure hold. it clamps onto the back or side of your desk for a semi-permanent mount that won’t be knocked back into your nest of cables..
  • Desk Mount USB Charging Power Station:2 PD 20W USB- C (each USB C port features PD 20W Max) & 2 QC3.0 USB- A Port(each USB A port features 3A Max). (Note: 40W is the total output of both USB-C ports, and each port's max output is PD 20W)..
  • Power Station Desk Surge Protector with Desk Clamp Edge Mount Bracket: The table needs to keep a distance of 0.4"-0.5" from the wall. The clamp fits desktops ranging from a maximum of 1.6" thick..
  • 7-Port Power Strip: 2 USB-C ports, 2 USB-A ports, and 3 widely spaced AC outlets allow you to charge 6 devices at the same time.flat plug 6ft power cord with grounded plug 12A 100V~250V~/60Hz 1500W. 900 Joules energy rating. made of fireproof plastic material..
  • This desk clamp power strip doesn't require screws and doesn't require holes in the table, which helps organize the power cord, ....
Check Stock

Gaming Light for Desk, Streaming Light with Desk Clamp Stand for Twitch

  • Gaming Light for Desk: 6 inches Ring light with 3 light modes (Cold Light,Mixed Light,Warm Light) and 10 adjustable brightness.
  • Streaming Light for Twitich: USB power supply, comes with 1/4''-20 female Thread, can work on Tripod, Monopod, Light Stand.
  • Desk Clamp Stand: height can be adjusted from 13.5inches/34.5centimeters to 23.2inches/59centimeters through fixed knob.
  • Desk Clamp: The clamp is adjustable for fitting different table through adjust the knob and screw. The clamp can support the table thickness from from 0.4 inches to 4.7 inches. with EVA silicone Non-Slip Mat.
Check Stock

Dual Monitor Stand, Dual Monitor Arm, Dual Monitor Mount VESA Mount, up to 32 inch Monitor Desk Montaje, Monitor Arms & Monitor Stands for 2 Monitors

  • ... height-adjustable and can customize your monitor combination, which is more convenient and efficient for design and data analysis work..
  • Super Compatibility - Widely fits two 13" to 32" monitors with VESA 75x75 mm or 100x100 mm mounting holes on the back. Each Monitor Arm Holds Up to 17.6lbs. Comes with both C clamp and grommet kits, this stand fits desks with or without a hole. C clamp fit a desk thickness up to 0.39"- 1.97" and grommet mounting fit a desk thickness up to 0.39"- 3.15"..
  • Effortless Assembly - Work is already hard enough! We don’t want to make things harder. And that’s why this monitor arms desk mount comes with labeled parts and clear instructions for quick assembly. MOUNT PRO provides you with professional customer service both before and after your purchase, don't wait any longer!.
Check Stock

JUSMO Camera Desk Mount Stand with 360° Ballhead, 14.5-37.7 inch Adjustable, Table Aluminum Light Stand with 1/4\ Screw Tip, Desk C-Clamp Mount Stand for DSLR Camera/Ring Light/Video Light/Webcam

  • DSLR desk mount stand with standard 1/4 screw can be mounted for the most cameras and lights which have a 1/4” adapter, such as ring light, DSLR camera, video camera, panel light, key light, webcam, Elgato Master Mount accessories..
  • Camera desk mount stand 14.5-37.7 inch adjustable. Gives you ample height for overhead shooting and lighting. Universal desktop light stand, 1.96 inch clip distance, compatible with most desk..
  • Desk clamp stand have removable ball head with an industry-standard 1/4" Screw allows you to expand your rig..
  • Clamp camera mount is made of sturdy and lightweight aluminum alloy, provides maximum stability and portable carrying..
  • NOTE: Webcam, Panel light, Ring light, DSLR camera Not included..
Check Stock

Obeamiu Camera Desk Mount Stand with 24.41'' Detachable Magic Arm, Mount Light Stand with 360° Ballhead, 16.7-40.1'' Tabletop Clamp Stand for DSLR Camera/Fill Lights/Selfies/Live Streaming/Webcam

  • Desktop C-clamp Stand Top with 1/4'' thread, come with ball head and a 1/4 hot shoe interface adapter (Removable). And asy to install microphone, Led video light, monitor to DSLR, camcorder or digital camera, Flash Remote Trigger or adapt anything via the 1/4" screw on the top of the mount..
  • 【Adjustablement with Locking Knob】Adjustable Desktop C-clamp Stand: The size height could be extended from 16.7-40.1 Inch as you like. The ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle. You can use the knob to adjust to the desired angle to meet your needs at different angles..
  • Made of highly-durable aluminum-alloy material with stainless steel, using a more stable structure. the hot shoe and c clamp clip with rubber-padded mount on the top to protect your equipment or table from potential scratches between your camera and the mounting part..
  • 【Flexible Position】With its solid-metal clamps, adjustable and sturdy stand. Mounts to the back of your desk (range from 0.5 to 3.6''' thickness) via a heavy-duty C-clamp or optional grommet mount. Our desk mount stand can be adjusted to any thickness within seconds as needed..
  • 【Package List and Service】1*Ball Head, 1*Ho....
Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
  • 【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..
Check Stock

SUNMON Quadcast Mic Stand with Boom Arm Clamps For HyperX Quadcast Microphone

  • 【Perfect Boom Arm】- Suspension boom arm stand fit your HyperX QuadCast suitable, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Assembly clip】 - suitable for mic arm desk mount and wall-mounted installation, Adapt to different use environments. It can be used as desktop microphone holder clamp, architect lamp clamp, magnifier lamp clamp, camera holder clamp..
  • 【Wide range of application】 - the bracket socket is suitable for most support pipes of 11-13mm. It is installed on a horizontal table with a maximum clamping thickness of 2.75"/7cm. It is installed on a vertical side plate and the maximum clamping thickness is 1.57"/ 4cm..
  • 【Compatibility】 - Perfectly match most boom arm stand. Double-size thread is specially designed to fit US and EU microphone stand. Note: Not Included Mic Stand and HyperX Quadcast Microphone..
  • 【Refused to break】 - heavy metal desk clamp, professional desktop stress structure effectively remove the stress generated when pushing and pulling the mic desk arm, reducing the possibility of desk clamps breaking..
Check Stock

StarTech.com Desk Mount Triple Monitor Arm - Ergonomic VESA 3 Monitor Mount up to 27 - Articulating & Height Adjustable Pole Mount - Tilt/Swivel/Rotate LCD/LED Screen - Desk Clamp/Grommet ARMTRIO

  • TRIPLE 27 INCH MONITOR MOUNT: VESA 75x75 or 100x100mm compatible heavy duty steel desktop multi monitor mount supports 3 displays up to 27" (17.6lb/8kg) per screen w/ articulation & height adjustment.
  • WIDE RANGE OF MOTION: Increase ergonomic comfort with +/-30° tilt & swivel, and 360° rotation.
  • Triple LCD/LED articulating monitor mount with individual micro height adjustment for screen alignment.
  • THREE MONITORS SIDE-BY-SIDE: Left & right displays can be positioned along their 13.4" arms that can articulate at +30° towards user.
  • Synchronized height adjustability along 17.4" pole (tools incl.).
  • FLEXIBLE INSTALLATION: Secure three monitor mount to a desk by hand with the desk-clamp (C-clamp) or grommet mount (10-80mm).
  • CABLE MANAGEMENT: Desk mount triple monitor arm with pre-installed and adjustable cable management clips are incorporated onto the pole and monitor arms to keep your computer workspace tidy.
Check Stock

Desk Mount Stand 2 Pack DSLR Camera Desk Mount C Clamp Light Stand 13.7 ~23.2 Photographic Light Boom Stand with 360° Ball Head for Camera Ring Light Video Light Video Conference Light

  • 【Retractable Desk Mount Stand】 The minimum height is 13.7 inches and can be extended to 23.2 inches, with positioning screw, loosen the knob and....
  • 【Multiple Angles】 The 1/4" ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography....
  • 【Upgraded table mounting clamp】 Compared with the old version, this tabletop mount clamp has a scratch-resistant pad and a wider mouth (up to 3.4....
  • 【Heavy duty structure】 The clamp mount stand is made of sturdy and durable aluminum alloy and weighs 490 grams/1.08 pounds. Designed for....
  • 【Package List & Warranty】 2*Ball Head, 2*Desk Mount Stand. 1-year warranty. (Please contact us if you encounter any, we will reply within 24....
Check Stock

WELLMETE The Desk Mount for Flight Sim Joystick - Compatible with Logitech G Extreme 3D PRO Joystick for Windows, Adjustable Durable Metal Holder for Hotas Gaming

  • Targeted Design: This Desk Mount is specially designed for Extreme 3D Pro Joystick, fully compatible with Logitech G Extreme 3D PRO Joystick.
  • Durable & Adjustable: Strong metal adjustable clamp make it suitable for any thickness desk and provide strong stability. The holder plate can be adjusted vertically which allow you to set your comfortable level..
  • No Harm to Desk or You: One silicone pad is pasted under the top plate base, so it won't hurt your desk and no slip or rotation at all. Clamp on the desk stably, more stable control for gaming..
  • No Harm to You: The round chamfer design makes the installation panel won't hurt your skin or any part of your body..
  • Comfortable Handling: Having flight joystick on our Desk Mount will give you much better experience than SIT it on your desk..
Check Stock

Neewer Microphone Stand Desk Mount Suspension Boom Scissor Arm Stand with 3/8 1/4 to 5/8 Screw Shock Mount Pop Filter Mic Clip Cable Straps Compatible with Blue Yeti/QuadCast/Logitech Webcam

  • 【Flexible & Durable Boom】 The Neewer boom arm offers 360° rotation and 180° vertical/horizontal movements for optimal positions, and the durable....
  • 【Desktop-Mounted Clamp】 The space-saving C-clamp can mount on a desk 2” (5.3cm) in thickness and keep your desktop clean and tidy. Inner rubber....
  • 【Shock Mount & Pop Filter】 The shock mount fits microphones up to 2.05” (5.2cm) in diameter and minimizes vibration noise for clear sound....
  • 【Convenient Cable Straps】 Five hook-and-loop cable straps allow you to tie the microphone cable along the boom arm and prevent it from tangling....
  • 【Package Contents】 1 × Microphone Boom Arm, 1 × Desk Mounting Clamp, 1 × Microphone Clip, 1 × Shock Mount, 1 × Pop Filter, 1 × 3/8” to....
Check Stock

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
  • Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....
Check Stock