Top Desoldering Braid With Flux

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width 1.5m Length with Flux - Desoldering Vacuum Pump Solder Removal Tool

  • High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
  • Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size.
  • geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs.
  • High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable.
  • Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering.
  • 7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size.
Check Stock

Herain No-Clean Solder Wick Desoldering Braided Wicks with Flux Desoldering Wicks Removal Tool Solder Sucker Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

  • 1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption..
  • 2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board..
  • 3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder..
  • 4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station..
  • 5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time..
Check Stock

2 Packs Solder Wick No-Clean Desoldering Wick Braid (2.5ft)+ Desoldering Pump Removal Tool + Micro Wire Cutter Steel Plier Cutting for Electronics

  • 【 Ideal Choice Soldering Accessories Kit 】—— Contains 4 packs of the most essential products for welding, soldering.
  • 【 Powerful Suction Desoldering Pump 】—— Good suction, reduce clogging.
  • Only one hand can easy operated with comfortable hold feeling, it will help you do better in soldering work.
  • 【 No-clean Copper Braid Desoder Wick 】—— Has excellent performance in desoldering, Anti-oxidation stability and anti-corrosion ability, This desoldering braid can quickly absorbed molten solder and left a clean working area, very convenient.
  • 【 Multifunctional, Durable Steel Wire Cutter 】—— The jaws are constructed of a high strength steel alloy, provides for resistance to rust and corrosion.
  • Easy handling insulate grips comfortable for operation.
  • Used in soldering, electronic device repair, jewelry processing, model making and fishing, etc.
  • 【 What you get from this solder kit 】 —— This package include 1 * Electronic Soldering sucking pump + 1 * Electronic wire Cutter + 2 * Desoldering wick, and We accept return, refund and replacement if you have any quesitons about the welding Items. Just contact us freely, we guarantee you 100% satisfaction.
Check Stock

Chemtronics 10-50L Chem-Wik Rosin Desoldering Braid, 2 pack

  • Includes 2 Spools of the Chemtronics 10-50L Ultra-thin, Fast Responding Desoldering Wick.
  • Better thermal conductivity, even at low temperatures, Overheating minimized by requiring less heat for shorter time.
  • Lighter mass and pure copper braid construction.
  • Responds as much as 50% faster than conventional desoldering braids.
  • Ultra-thin desoldering wick, 0.100 in. wide.
Check Stock

BEEYUIHF Rosin Soldering Paste Flux, Solder Paste Flux, Flux for Soldering, For SMD PCB Soldering & Repair, Electrical Soldering Rosin Flux (1.76oz/50g)

  • BEEYUIHF #7150 Soldering Paste Net weight: (1.76oz/50g) Rosin Solder Paste Flux, made of no acid, Lead-Free, No-Clean, soldering flux paste which is not easy to dump. Rosin Soldering Paste,High Purity,Good helper for repairing and welding..
  • Soldering Flux Paste Feature: No corrosion, high intensity joint, good immersion, good insulation, good soldering properties, smooth welding surface..
  • Flux for soldering application: Maintenance drag soldering, BGA planting tin, maintenance desoldering, electronic components soldering, mobile phone maintenance, mobile phone chip maintenance, LED lighting, home appliance maintenance.Have strong oxide removal effect to gold-copper alloy substrate and wire..
  • #7150 paste flux features: Lead-free, halogen-free, acid-free, no cleaning, less residue, easy to tin, less smoke, help soldering firm, make soldering fluidity better, slightly yellow paste..
  • Solder Flux also a good helper for maintenance enginee. Rosin soldering flux paste metal can packaging, High-quality aluminum box packaging, not easy to break..
Check Stock

Solder Wick Braid Copper Wire with flux 10 ft 3M Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board 1pcs

  • ✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux..
  • ✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs..
  • ✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process..
  • ✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components..
  • ✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process..
Check Stock

Soldering Iron Auxiliary Kit, Desoldering Pump, No-Clean Soldering Core (Width2.5mm / 0.1\

  • The main body of the desoldering pump is made of high-quality ABS material, with a non-slip sponge. The nylon nozzle can withstand high temperature, anti-static, heat-resistant, durable, special design, convenient for one-handed use..
  • High-quality desoldering braided tape is woven with fine copper wire, unique no-clean flux, easy to use, pure oxygen-free copper wire, 2.5mm / 0.1 inch width and 1.5m / 59 inch length, can help remove excess Avoid solder,Avoid short circuit， especially in hard-to-reach small areas..
  • Micro Shear Wire Cutter Pliers are made of high quality steel, with strong cutting ability, For cutting flexible cords up to 1 mm, non-slip handles, return springs, small volume。.
  • Solder wire diameter: 0.8mm, weight: about 0.35 ounces / 10 grams. Easy to carry and store, suitable for various soldering irons..
  • Suitable for correcting errors on PCB boards, cleaning small components, resoldering and desoldering circuit boards, Appliance Repair, Family DIY lovers, welding, etc..
Check Stock

GOOT Solder Wicks Made In Japan No-Clean Solder Braided Wicks Desoldering Wicks With RMA Flux,59'Length x 0.12\Width

  • Brand History -- Founding in 1965, GOOT had captured a 60 per cent share of Japan’s domestic market for soldering products and for almost 50 years has been providing customers with a wide range of high quality and easy-to-use soldering products..
  • High Efficiency -- High performance solder absorbing wire precision preparation with copper wire and special chemical formula, suitable for precision instruments (RMA corresponds to the use of standard flux). Our thin and soft desoldering wire’s flat braid has efficient thermal transmission. Removes solder faster with better heat response than previous wicks. Recommended for lead-free solder with high heating load..
  • Good Quality -- Solder wire with flat needle type preparation, soft design, fast heat transfer, suitable for fast absorption. It not only help you improve efficiency and quality, also more environmentally friendly..
  • Safety and Variety -- Use at ease. No fluorine, low residue, suitable for a variety of PCB circuit boards. Size - W 0.12" L 59".
  • 100% Satisfaction Guarantee -- You can return the undamaged product and packaging without any reason within 30 days. Any problems can be contacted by email..
Check Stock

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 7-in-1 Solder Set: 6 pcs different copper solder braid is made of copper and rosin geometrically accurate braiding when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (2.0mm,1.5m.
  • 3.0mm,1.5m), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 7-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10\

  • Responds as much as 50% faster than conventional desoldering braids.
  • Lighter mass and pure copper braid construction.
  • Better thermal conductivity, even at low temperatures.
  • Overheating minimized by requiring less heat for shorter time.
Check Stock

Pro-Line Helping Hands Soldering Station with Illuminated Magnifier & 15 Watt Soldering Iron 15W by RadioShack

  • 20W miniature soldering iron with ergonomic cool-comfort grip with stand and cleaner..
  • 2.5mm desoldering braid & cleaning sponges..
Check Stock

TOWOT Desolding Pump & 2PCS Desoldering Wick (Length: 1.5m; Width: 2.5mm) Used to Remove the Solder and Disassemble Electrical Components, No-Clean Solder Wick Braid

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • 3-in-1 Solder Set: 2 PCS copper solder braid is made of copper and rosin geometrically accurate braiding, when it is heated, it can quickly absorb and melt to remove excess solder, avoiding short circuits, size (length: 1.5m.
  • width: 2.5mm), Suction Pump Size (length: 21cm)..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering wicks and desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Value Package: 3-in-1 soldering package, commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock