Top Diamond Coated Reamer Bit

Diamonds (Marble Vinyl)

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

uxcell 115mm Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

  • SIZE - 115mm(4.5-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter..
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Side open can remove the waste to keep the drill bit clean. (Needs to be used at a low speed, about 800-1000 RPM.
  • Please add coolant liquids or water when processing).
  • APPLICATIONS - Perfect for drilling Glass, Tile, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Marble, etc..
Check Stock

Diamond Drill Bits Set, 10 PCS Diamond Hole Saw Set, Glass Drill Bit for Ceramic Tile Porcelain Marble Granite Stone Bottles

  • 【Diamond Drill Bits】These drill bit kits are made of upgraded carbon steel with smooth nickel plating surface to resist corrosion, sharp and durable without edge collapse..
  • 【Premium Quality】Coated with high quality diamond to improve drill efficiency and creates a sharp, high precision and smooth cut..
  • 【Hole Saw Set 10 Sizes】1/4", 5/16", 3/8", 1/2", 9/16", 5/8", 11/16", 4/5", 7/8", 1-1/5"，to meet various drill needs..
  • 【Versatile Uses】Diamond hole saw drill bit set kit are used to drill Glass, Porcelain, Ceramic, Marble, Granite Stone, Bottles, YDPATIOGEMJ, Pots..
  • 【Tips】Please keep adding water when drilling to extend the life.Besides the water lubrication will improve the drilling experience..
Check Stock

10 Pack Diamond Drill Bit Set, 6mm (1/4inch) Small Diamond Hole Saw Kit for Glass, Ceramics, Porcelain, Ceramic Tile, Marble

  • HIGH QUALITY MATERIAL: The diamond drill bits are made of premium high-speed steel with nickel-plated coated body that resist corrosion. Thicken diamond coating on the tops offers the ability that each sharp bit for a few holes..
  • CLEARANCE HOLE DESIGN: Drill bits set along with side clearance hole facilitates the entrance of cooling water and escape of chips, making the drilling process easier and relaxiable..
  • WIDE APPLICATION: The diamond coated drills are perfect for drilling glass, tiles, porcelain stoneware, granite slabs, tiles. Fit for any diamond tipped drill bits of any brand..
  • TIPS: Start drill at 45 Degree to surface and align to 90 Degree as hole forms.Water is required to cool down the drill when using them..
Check Stock

uxcell 45mm Diamond Coated Glass Hole Saw Drill Bits for Ceramic Tile Marble Rock Porcelain

  • SIZE - 45mm(1.8-inch) Drilling Diameter, 10mm(0.4-inch) Shank Diameter..
  • DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp..
  • NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance..
  • SPECIAL DESIGN - Slotted edge makes it more sharp, works more efficient. Side open can remove the waste to keep the drill bit clean..
  • APPLICATIONS - Perfect for drilling glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, light stone and fiberglass. (Need to be used at a low speed.
  • Always use lubrication (water) when processing, otherwise the hole saw will burn.).
Check Stock

Oudtinx Diamond Drill Bit Set, 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm - 30mm

  • SMALL RESISTANCE: Small incision resistance, opening speed is quickly, easy removal of chips and other advantages.Also help to open accurately. Large chip holes to ensure that when the punching smooth, punching accurate..
  • DURABLE: Nickel-plated with a diamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole..
  • IDEAL FOR: This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably..
  • TIP: Can be used with a standard electric drill (not included), Always use lubrication (water), otherwise the diamond core drill will burn. Warnings: Not for use on Concrete or for depths beyond about 1/2".
  • Water is required for lubrication when drilling..
  • 10 SIZES: Total 10 different sizes (6mm,8mm,10mm,12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 30mm).Different sizes meet your different needs,help you in different places..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

THINKWORK Diamond Drill Bits Hollow Drill Hole Saw Set 10-Piece Tile Opener with Hole Saw Guidance Fixture Suitable for Ceramic Glass Tile Porcelain Marble

  • 【Superb craftsmanship】These diamond drill bits are made of industrial grade carbon steel and have a nickel-plated coating to resist corrosion. The....
  • 【Ergonomic design】The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from....
  • 【Adjustable fixture】Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4 ", which is....
  • 【Various sizes】This diamond hole saw kit come with 10 different drill bits to meet various needs. Including the following diameters: 6mm, 8mm,....
  • 【Ideal select】This diamond-coated hole saw bit can be used to remove rings on glass, marble, tile, ceramic, PVC or other materials. When the....
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

Drill Bit SHARPENER Corundum Grinding Wheel Titanium Portable Powered Tools US

  • SHARPEN MULTIPLE TYPES OF DRILL BITS – high-speed steel, masonry, cobalt, & TiN-coated drill bits. Designed for the serious tool user, this professional, easy-to-use system makes it simple to keep a sharp, perfectly angled cutting edge on bits you use often.
  • CUSTOM POINT ANGLE SHARPENING – set any angle from 115° to 140° with cast aluminum point angle shuttle for added durability. Option to make a unique BACK-CUT split-point bit that gives your bit an extra-narrow chisel point, making it faster to penetrate and less likely to wander on the material you are drilling in to.
  • Holds up to carbide, titanium and cobalt material.
  • Coarse 100 Grit diamond sharpening wheel.
  • More efficient grind when sharpening larger drill bits from 1/2-Inch to 3/4-Inch.
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock