Top Diamond Mesh Lath

Diamond Machining Technology (DMT) 8-in. Dia-Sharp Diamond Whetstone Bench Stone, Extra Extra Fine Grit Sharpener (D8EE)

  • Diamond Wet Stone: Guaranteed not to hollow or groove, this precisely engineered diamond stone ensures consistent, even sharpening every time and accommodates a range of edges.
  • Extra Extra Fine: Achieve the ultimate sharp edge with this extra extra fine diamond sharpening plate (3 microns/ 8000 mesh).
  • Our diamond plate features non-skid rubber feet with the grit clearly marked on the side.
  • Versatile: Engineered to accommodate a range of edges from large knives to small pointed tools, this diamond stone sharpener will stay flat throughout without hollowing, chipping, or cracking.
  • Fast & Easy: A micronized monocrystalline diamond surface sharpens edges faster and easier than conventional sharpening stones.
  • No messy oils are needed either -- sharpen dry or with water.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide years of consistent performance and reliable service.
  • Sharpening surface accommodates range of edges. From large knives to small pointed tools.
  • Extra-Extra Fine diamond to polish to the finest edge, 3 micron/8000 mesh.
  • Sharpens knives faster than conventional stones with DMT's monocrystalline diamond surface.
  • No oil is needed-sharpen with soapy water.
Check Stock

Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3', 4', 5', 6', 7' and 8' Chain Link Fence (4ft, Black)

  • Black Ridged Slats for 4ft chain link are deliberately cut to about 44.5 inches long. These fence inserts are designed primarily for 4ft 11 or 9 gauge chain link with a two inch diamond. Also works in economy chain link with a larger diamond pattern, but privacy will be less. Slats must be installed correctly and be fully inserted inside the wire mesh of your fence to achieve the desired results. Cannot be used to extend the fence height. Not suitable for fences on a steep slope..
  • Amount of privacy achieved is determined by diamond size of existing chain link fence. Each slat measures 1.25" wide. Ridged Slats will provide about 85 percent blockage in chain link with a 2" diamond. Slats installed in chain link mesh with a 2-1/4" diamond will achieve about 80% coverage. Slats used in economy chain link fabric with a 2-3/8" diamond will produce about 75% privacy. Diamond size is determined by measuring diagonally between the parallel wires - NOT corner to corner..
  • Each box contains 82 “W” shaped slats and three 42-inch pieces of Viper Channel - enough to cover 10 linear feet of chain link with a 2" diamond pattern. Chain link with a larger diamond mesh pattern will use fewer slats but ALL the track provided in each box. 2-1/4" chain link will use abou....
Check Stock

Ridged Slats Slat Depot Single Wall Bottom Locking Privacy Slat for 3', 4', 5', 6', 7' and 8' Chain Link Fence (6ft, Black)

  • Black Ridged Slats for 6ft chain link are deliberately cut to about 68.5 inches long. These fence inserts are designed primarily for 6ft 11 or 9 gauge chain link with a two inch diamond. Also works in economy chain link with a larger diamond pattern, but privacy will be less. Slats must be installed correctly and be fully inserted inside the wire mesh of your fence to achieve the desired results. Cannot be used to extend the fence height. Not suitable for fences on a steep slope..
  • Each slat measures 1.25 inches wide. Bottom-locking Ridged Slats will provide approximately 85 percent blockage in chain link with a 2" diamond. Slats installed in chain link mesh with a 2-1/4" diamond will achieve approximately 80% coverage. Slats used in economy chain link fabric with a 2-3/8" diamond will produce about 75% privacy. Diamond size is determined by measuring diagonally between the parallel wires - NOT corner to corner..
  • Each box contains 82 “W” shaped slats and three 42-inch pieces of Viper Channel - enough to cover 10 linear feet of chain link with a 2" diamond pattern. Chain link with a larger diamond mesh pattern will use fewer slats but ALL the track provided in each box. 2-1/4" chain link will use about 77 slats per 10 feet. 2-3/8" chain link will use....
Check Stock

Diamond Machining Technology (DMT) W4K Mini Diamond Knife Sharpener Whetstone Set, 4 Pack

  • Extra-Fine diamond (9 micron / 1200 mesh) to polish and refine a razor edge.
  • Fine diamond (25 micron / 600 mesh) for a razor sharp edge.
  • Magna Base System allows for 2" knuckle clearance and easy to change and remove the bench stone for quick grit changes.
  • Sharpens knives faster than conventional stones with DMT's monocrystalline diamond surface.
  • No oil is needed-sharpen dry or with water.
  • Durable construction will provide years of consistent performance and reliable service.
Check Stock

GUESS Mesh Black Ionic Plated Rectangular Genuine Diamond Watch. Color: Black (Model: U0298G1)

  • Feautres: GENUINE DIAMOND accents at 12 o'clock and 6 o'clock.
  • 37 MM CASE SIZE with DURABLE MINERAL CRYSTAL that protects watch from scratches.
  • STAINLESS STEEL POLISHED BLACK IONIC PLATED CASE.
  • STAINLESS STEEL POLISHED BLACK IONIC PLATED MESH BRACELET WITH DEPLOYMENT BUCKLE.
  • Japanese Quartz Movement. Battery Included.
  • Rectangular diamond dressy mesh watch that's unisex, a perfect hybrid for women too.
Check Stock

Rolling tomatoes

  • Diamond Lapping Plate: Featuring a generous 40-inch surface area, this 10 by 4 inch flattening plate easily flattens conventional and waterstone faster than any other method.
  • Diamond Hardcoat Technology: Diamond sharpening plate features a revolutionary new coating designed to outlast any other currently available on the market.
  • Premium Performance: Diamond plate sharpening stone features an agressive (95 micron / 160 mesh) surface that quickly and easily flattens waterstone, oilstone or Arkansas stone.
  • Durable Construction: Lapping plate is designed to provide years of consistent performance and reliable service.
  • Made In The USA: DMT offers the most efficient flattening tools on the planet, tools like this diamond flat plate — the fastest, easiest, and most effective tool for flattening a stone or sharpening an edge.
Check Stock

10 Yard Acrylic Rhinestone Diamond Ribbon for Wedding Cakes Birthday Decorations Baby Shower Events and Arts and Crafts Projects Rose Gold,4 Row

  • What you get: acrylic rhinestone diamond ribbon on a mesh backing.
  • Easy to use: this rhinestone ribbon is cuttable, so that you can gain the suitable length easily.
  • Reasonable design: faux rhinestones are all attached by a mesh grid, which can easily be cut with scissors for easy customization.
  • Enough length for DIY: the diamond ribbon roll is 10 yards in length, enough to meet your various decorative needs.
  • Apply to: these rhinestone diamond art ribbons are shiny and charming for decorating wedding party, baby diaper cakes, candles, vases, centerpieces,....
Check Stock

SHDIATOOL 4-1/2 Inch Porcelain Diamond Mesh Turbo Saw Blade Cutting Granite Marble Ceramic Tile Brick Pack of 2

  • 2pcs 4.5" Hot pressed sintered Mesh Turbo Diamond Saw blade with rim segment for cutting.
  • Diameter 4.5"/115MM, Bore 22.23MM with 22.23-20mm washer, Diamond height 10MM, Segment thickness 1.6MM..
  • Remark: Please remove the 22.23-20mm washer,if you fit the 7/8” arbor..
  • Dry or wet cutting for Hard material, granite marble tile ceramic brick.
  • New Design of Mesh turbo rim segment, the mesh turbo help to cooling and bring the dust out, so more efficient, fast and stable in cutting.
Check Stock

Diamond Machining Technology DMT 8-in Dia-Sharp Diamond Whetstone Bench Stone Extra Fine Grit Sharpener D8E

  • Diamond Wet Stone: Guaranteed not to hollow or groove, this precisely engineered diamond stone ensures consistent, even sharpening every time and....
  • Extra Fine: Polish and refine sharp edges with this extra-fine diamond sharpening plate (9 micron / 1200 mesh).
  • Versatile: Engineered to provide cutting-edge performance, this 8-inch diamond stone sharpener is ideal for repairing and honing knives and tools,....
  • Fast & Easy: A micronized monocrystalline diamond surface sharpens edges faster and easier than conventional sharpening stones.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide....
Check Stock

Diamond Machining Technology (DMT) FSKF DiaFold File, Fine,4'

  • Diafold Serrated Knife Sharpener: Features 4" cone tapers ranging from 1/4" to 1/16" in diameter.
  • designed for sharpening serrations of all sizes and straight-edge knives, this lightweight diamond stone is ideal for your home, shop, or recreational use.
  • Diamond Surface: This amazing tool not only maintains serrated edges, but also serves as a mini steel gut hook sharpener and conical file.
  • features a fine diamond (25 micron / 600 mesh) surface for razor-sharp edges.
  • Portable: Compact, lightweight diamond serrated sharpener features convenient fold-and-go handles, which enclose and protect the diamond plate when not in use.
  • Fast & Easy: A micronized monocrystalline diamond surface sharpens edges faster and easier than conventional sharpening stones.
  • No messy oils are needed either -- sharpen dry or with water.
  • Made In The USA: Preferred by professionals for their superior quality and versatility, our durable diamond sharpening stones are built to provide years of consistent performance and reliable service.
  • Portable, lightweight with convenient fold & go handles which enclose and protect the diamond serrated sharpener when not in use.
  • Sharpens knives faster than conventional stones wit....
Check Stock

Stainless Steel Lath Screws 8 x 3/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 3/4 0.75 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock