Top Diamond Meter Antenna

Authentic Genuine Nagoya TB-320A Fold-Over 39-Inch PL-259 Mount Tri-Band 2m/1.25m/70cm (144/220/440 MHz) Antenna, Includes NMO to UHF (SO-239) Adapter

  • Fold over design allows the Antenna to Fold-Over which allows you to easily put the antenna down in parking garages or in other places where height matters..
  • PL-259 with included NMO to UHF Adapter, Tri-Band VHF, 1.25M, & UHF (137-174, 220-225, 400-520 Mhz), Weatherproof.
  • The TB-320A is the ideal antenna for FM operation on 2 meter, 1-1/4 meter (220), and 70-cm bands..
  • Easy To Install, Omni-Directional, Requires NMO or UHF antenna Mount (Nagoya RB-50 Magnetic Mount Recommended), Measures ~38.5 inches, Stainless Steel Antenna.
  • Pairs Great with the BTECH UV-25X4 or BTECH UV-50X3.
Check Stock

Super Antenna MC2 SuperPlexer 2 Meter VHF Adapter for MP1 Series HAM Antenna HF Portable Amateur Radio

  • THIS IS: The model MC2 SuperPlexer by Super Antenna. The 2 meter band adapter for all Super Antenna MP1 series antennas. Designed as part of the /backpack /base /travel /mobile /portable antenna system for transmitting and receiving on HAM radio frequencies. Deploys in one minute by one person with no tools needed..
  • FREQUENCY RANGE: 144 MHz to 148MHz. When utilized with your Super Antenna MP1 series antenna (sold separately), this adapter provides simultaneous HF and 2 meters on the same coax cable. BAND: 2 meters. The MC2 SuperPlexer has no negative effect on HF operation, it can be kept on the antenna continuously..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 series Antennas and Equipment. Attaches by inserting between the MP1 SuperSlider and the mount. Also may be compatible with other mobile antennas such as manually tuned bug catchers, CB whips, bug sticks, and many other tunable mobile whips that have 3/8"-24 fittings..
  • POWER RATING: 500W SSB, 300W CW/DATA. SIZE: 20.0"x1.25"x1.25" (15x32x32cm). COLOR: Stealth Black and Metallic. WEIGHT: 12 ounces (200g)..
  • FITTINGS: 3/8-24 standard threads, male fitting on bottom, and male fitting on top of diplexer. CONTENTS OF PACKAGE: 1 MC2 SUPERPLEXER, 1 ER2 EXTENSION ROD, 1 MR2B RADIAL SET, 1 MR2....
Check Stock

Winegard Boost XT Pro - Outdoor Ultra-Low Noise Preamplifier + Integrated Channel Finder

  • The Winegard Boost XT Pro enhances any non-amplified antenna, delivering a clearer signal, more range, and more available channels. Only works with any passive/non-amplified antenna..
  • The integrated signal meter makes you the pro at installation. Pair with the Winegard Connected app for no-fuss antenna positioning..
  • TwinAmp Technology separately amplifies VHF and UHF signals for maximum performance and lowest noise and interference levels..
  • Winegard’s Clear Circuit Technology offers the lowest noise (1dB typical) to deliver more range and less signal dropout and pixelation..
  • Included components: Preamplifier, 110V adapter, hose clamp, USB power cable with 110V adapter, app-enabled Bluetooth technology signal meter, and printed documentation.
Check Stock

Super Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane

  • THIS IS: The model MR8075 SuperWire Radial Set by Super Antenna. It is designed for use with the MC80 SuperCoil on all Super Antenna MP1 series portable HF antenna systems. Made by Super Antenna for /backpack /base /travel /mobile /portable antenna systems for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to the 80 meter or 75 meter (3.5 to 4 MHz) ham band. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on c....
Check Stock

MFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

Japard Satellite Finder Signal Meter with Level Display – Pointer Display Measuring Device with High Signal Sound, Checking Angle and Direction, No Battery Required

  • Includes: TV Signal Strength Meter with Adapter Kit, and a Coaxial Cable.
  • Perfect For: Provides you with an over the air signal strength meter for digital TV antenna - designed for terrestrial digital television broadcast.
  • Features: The signal finder meter flaunts an impressive LED feedback display, sensitivity adjuster and coaxial Cable for an easy installation.
  • VERSATILITY - Perfect for positioning stationary mounted antennas or can be used by travelers in RV's looking to aim your directional antenna towards better signals in new or unfamiliar areas.
  • Quality Assurance: DTV signal finder Includes a US manufacturers warranty.
Check Stock

MFJ-969 MFJ969 Original MFJ Antenna Tuner + SWR Meter (Manual - 1.8-50Mhz [160-6 Meters], 30/300W)

  • The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off switch, antenna switch and a 4:1 balun! (The light uses 12 VDC or 110 VAC with MFJ-1312D * Not included).
  • MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets you select 2 coax lines, random wire/balanced line or dummy load (direct or through)..
  • An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet has a durable scratch-proof multicolor Lexan front panel matches your rig perfectly and fits right into your station..
Check Stock

Nelawya 5.8dBi LoRa Antenna N Type Male LoRawan Antenna for RAK MNTD V2 Nebra Bobcat Sensecap Helium Hotspot Miners Grey

  • Frequency Range:902MHz - 928MHz. Gain:5.8dBi.
  • Ultra Low Loss Cable:3 Meter(10ft) Long N Female to RP-SMA Male Low Loss KMR200 Cable Allowing Install The Antenna indoor/outdoor.
  • Industrial Grade Construction Design, Quality Build and Durable Fiberglass Finish Make it More Suitable for All-Weather Operation. Built-in Pure Copper Oscillator for Performance Ultra Distance Signal Transmission..
  • Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.. Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems..
Check Stock

Nelawya 5.8dBi 915MHZ LoRa Gateway Indoor Antenna Magnet Base Pure Copper with 3M/10FT KMR195 Cable for Helium LoraWan RAK Nebra Bobcat 300 SenseCAP M1 Finestra Hotspot HNT Miner

  • Frequency Range:902MHz - 928MHz. Gain:5.8dBi.
  • This indoor pure copper encased omni-directional 915 MHz antenna with 5.8 dBi gain. Results in higher coverage and Increased $HNT revenue.The heavy-duty magnetic base that measures 2.4 inches in diameter and has a 10 ft/3 Meter KMR195 cable attached to go to your miner..
  • Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems..
  • Low Loss Cable:3 Meter(10ft) Long Low Loss KMR195 Cable Allowing Install The Antenna indoor/outdoor.
  • Package List: Antenna Kit x 1, Adapter x 1.
  • This antenna can be used outdoors however the magnet base is not rated for outdoor use, therefore we recommend keeping this inside near a window.Doing so will increase your witnesses and also beacons..
Check Stock

MFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner

  • Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
  • Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
  • Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
  • 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
  • More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check Stock

Cobra HGA 1500 Hga1500 36 Inch Magnetic Mount CB Antenna Heavy Duty Magnet, for use In Cars, SUVs Recreational Vehicles 300 Watt Power Handling Capability

  • Built to outperform the competition - a non-abrasive heavy duty 4 inch magnet ensures that once the antenna is placed, it will stay there as long as you need it to.
  • The ultimate recreational magnet mount antenna - ideal for trucks, SUVs, and recreational vehicles this antenna will stay on when you need it, But is completely removable when not in use. Use the coax 15 feet of matched-braided Coaxial cable to attach to any CB or 10 meter radio RF Pl259 connector.
  • Works with all CB & 10 meter radios - 100 Watt rating with broad-banded frequency of 26-30mhz and weather channel ready.
Check Stock

MFJ-941E MFJ941E MFJ Enterprises Original HF Antenna Tuner with Mini Cross Meter 300 Watts

  • The MFJ-941E gives you a 300 Watt antenna tuner that covers everything from 1.8 - 30 MHz -- plus you get a lighted Cross-Needle meter with on/off....
  • MFJs lighted Cross-Needle meter shows SWR, forward and reflected power all at a glance in 300/60 and 30/6 watt ranges, 8 position antenna switch lets....
  • An efficient 12 position airwound inductor gives lower losses and more power out. Has 4:1 balun, 1000 Volt capacitors. The beautiful aluminum cabinet....
Check Stock