Top Die Flat Bar

uxcell 1/2-13 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. Th....
Check Stock

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • accuracy class: 6g. Made of alloy tool steel, hardness, high torque, good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ....
Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

  • fine grinding. Made of alloy steel, hardness, high torque, good toughness and wear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter shoul....
Check Stock

Hanson 1765542 1/4-20 - 1/2-13 Pts SAE Set for Tap Die Extraction 12 Piece

  • Tap and die set includes: Fractional: 1/4" - 20 NC, 5/16" - 18 NC, 3/8" - 16 NC and 1/2" - 13 NC.
  • Also includes 1" die stock, die spacer, small and medium adjustable tap sockets and a T-bar.
  • Handles allow more comfort and control when threading.
  • The ergonomic handles on the drive tools allow more comfort and control when threading.
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ...Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
  • ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Check Stock

1/8 x 1 Brass Flat BAR 12 Long Solid .125 Plate Mill Stock H02 1/8 x1 x12

  • Various sizes of brass flat bar are offered with vaiety of thickness , width & length . Choose the best that suits your craft or knife blade making project. Our brass flat bars are fresh cut & hence can be used for Lathe , milling & other functions. Semi hard brass bars are good for all types of craft projects..
  • Sizes Available 1/8" x 2" x 12" brass flat bar ( approx. 3mm thickness) 1/4" x 2" x 12" brass flat bar (approx. 6mm thickness) 1/2" x 2" x 12" brass flat bar (approx. 12mm thickness) 3/8" x 2" x 12" brass flat bar (approx. 10mm thickness) and many more to choose from.
  • We will be adding more and more size options for Brass Flat Bars , Rods & Sheets, if you need a specific size and do not find it in the listing send us a message and we will add it to the offering..
  • High quality Brass Flat Bars for Knife & Craft Hobby.
Check Stock

simplehuman Single Wall Mount Shower Pump, Stainless Steel

  • WIDE OPENING – Makes refills fast, easy, and spill-free..
  • EASY TO INSTALL – Installs easily with double-sided tape..
  • ELIMINATE BOTTLE CLUTTER – Fill wall mount pumps with shampoo, conditioner or body wash..
  • RUST-PROOF MATERIALS – Durable, long-lasting materials won’t rust or discolor..
  • Eliminates bottle clutter from your shower.
  • 5-YEAR WARRANTY – We use the best materials and solid engineering so our products will last in tough environments like your home — for years..
  • Easy to install with adhesives or screws.
  • DURABLE DIE-CAST T-BAR LEVER – Makes it easy to dispense just the right amount of soap, shampoo or conditioner..
  • EASY TO CLEAN – Dispenser lifts off wall plate for easy cleaning or refill..
  • CONVENIENT STORAGE HOOKS- Hold a razor, loofah, or other accessories..
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ...Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
  • ➤[Tap and Die Sizes]: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
Check Stock

6 Inch Led Pods Light Bar - nicerpro Slim 60W 10000Lm 12V/24V Driving Fog Light Waterproof Combo Flood Spot Lights for Trucks Off Road ATV UTV Golf Cart Trailer 2 Pack

  • 【COMBINED】nicerpro 6 inch led light bar,made by 16pcs*High Intensity Chips for spot&flood beam pattern,helping you see the forward trip as clear as day.
  • 【WIDE APPLICATION】The 6 inch light bars,Fit all 12V/24V Automotive Vehicles Trucks Off road 4×4,Cars, Trucks, Tractors, SUVs, ATVs, Boat.
  • 【LONG LIFESPAN】Made by Aluminum Alloy Die-Casting Shell, enlarged the heat dissipation area, cooling the light quickly, protecting the light bar from overheating while working,effectively extend light’s lifespan to over 50,000 hours..
  • 【WATERPROOF】With durable die-cast aluminum shell, toughed glass so they can withstand harsh condition outdoor.
  • 【Package Included】2x 6 Inch led light bar.
Check Stock

5\ EXTENSION PNEUMATIC POWER POWERED EXTENDED LONG SHAFT AIR DIE GRINDER TOOL

  • 1/4” Air straight Die grinder-This air die grinder features a straight head, equipped with a 1/4” collet and a 1/8” collet, which could hold a variety of grinding bits, ideal for all kinds of materials. This pneumatic die grinder has a special latch attached to the trigger mechanism that acts as a child safety lock to prevent the tool from accidentally starting up. Note: Please remove the DUST PLUG before insert the air connector..
  • Light-Weight & Ergonomic Designed Body - The air die grinder features a slim design and has a lightweight (0.72 lbs) but durable and solid body, comfortable to maneuver and perfect for one-handed grip. The ergonomically designed body is comfortable to hold for long work sessions..
  • High Free Speed - The Pneumatic straight die grinder operates at a maximum speed of 25,000 RPM continuous power with an air compressor, which allows for precision cutting, grinding, shaping, and sanding. Operating pressure: 90psi (6.3bar). Air consumption: 85.5l/min (3cfm). Note: Use sealant tape to avoid air leakage..
  • Rear Exhaust - A rear exhaust makes the lower sound level possible, while also ensuring that the exhaust isn't hitting the operator in the face. The air inlet filter could keep the die grinder from contamination. Note: Add oil r....
Check Stock

FMA Omcan Food Machinery TR95 Commercial Pasta Extruder 13 lb Capacity 33 lb hr

  • Supplied with 3 cutter dies (N. 8, N. 21, and N. 26) 1 spaghetti die, 1 penne die, and one combination fettucini and flat die.
  • Comes with full instruction manual featuring many recipes as well as 3 pasta dies. Additional dies available for $199 each..
  • These pasta extruders are ideal for restaurant and supermarket applications. The TR50 and TR70 are economical table top models while the TR75C to....
Check Stock

TEJATAN - Straight Steel Brace (Also Known as - Straight Bracket, Straight Metal Bracket, Steel Straight Brace, Steel Straight Brackets) (Set of 4)

  • Size - 6.1 inches X .7 inches , Constructed from high quality Steel, ensuring quality and longevity.
  • Color Silver - Easy to install, strong and durable.
  • Can also be known as straight brackets with screws , stainless steel flat bar , metal strap with holes , metal strapping with holes , metal strip with holes.
  • Can also be known as Mending Brace, Mending Plates, Straight Mending plates, Mend Brace, steel Mending plates , flat bracket , flat steel bars , metal strip with holes , metal straight bracket , brackets straight , straight brackets , straight brackets with screws , mounting bracket , straight metal brackets , flat bar with holes , furniture bracket , reinforcement bracket, metal strapping with holes , metal strip with holes , flat metal bar , stainless steel flat bar , steel plate.
Check Stock