Top Die Locking Ring

uxcell 1/2-20 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ...ear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell M16 X 1.5 Metric Round Die, Machine Thread Right Hand Threading Die, Alloy Steel

  • ..., good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell 1/2-13 UNC Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel

  • ...ear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell M2.5 x 0.45 Metric Round Die, Machine Thread Left Hand Threading Die, Alloy Steel

  • ..., good toughness and wear-resistance..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

uxcell 1/4-28 UNF Round Die, Machine Thread Right Hand Threading Die, Alloy Tool Steel, 2pcs

  • ...ear-resistance for long service life..
  • Applications: Can process, correct or clean the external threads. Suitable for general purpose threading in stainless steel, aluminum alloy, cast iron, copper, iron, aluminum, plastic, etc.. Great for maintenance and repair work on pipes, boards and machinery..
  • Features: Conical locking hole, strong locking and not loose. Perfect for re-threading existing threads in hard materials like metal and making new threads in soft material such as plastic. The surface is lubricated with grease to prevent rust, the thread is clear and easy to repair..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened. The end of the bar should be chamfered 1*45 degree, and the chamfer is too large to cut in..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread. Excessive diameter can easily cause difficult cutting and lead to damage to the die teeth..
Check Stock

SOLEILLUNE Battery Cable Lug Crimping Tool for AWG 10, 8, 6, 4, 2, 1 Terminals with 60Pcs 8Specs Copper Ring Cable Lugs Kit Heavy Duty Wire Terminal Crimper for Electrical Connectors

  • ...l help you use less effort when crimping..
  • 【ROTATE CRIMP DIES】The professional cable terminal crimping tools are available in 6 crimping sizes, 10, 8, 6, 4, 2, 1 AWG (Corresponding to 6mm²/10mm²/16mm²/25mm²/35mm²/50mm²), and use a hexagonal rotating crimp die which is retained in place with a spring loaded locking pin. Thanks to processed by Wire EDM Cutting, the crimp die is more accurate than the ordinary casting die or stamped die..
  • 【EASY OPERATION】Open the handle of the crimper, then press the Lockpin and rotate the crimp jaw to the size you need, place the cable and lug, then pull strongly on the ratcheting wire terminal crimper to make a great crimp on the cable lugs. Finally, rotate the connector 90 degrees to another direction and repeat the previous step for secondary crimping. Crimping twice is more secure..
  • 【APPLICATION AND COMPATIBLE】Compatible with copper, aluminum cable lug, non-welding, and standard electrical connection. Making a secure connection with cables, stranded conductors, electrical appliances, and other power mechanisms in harsh-duty environments..
  • 【PACKAGE CONTENTS】1 x Battery Cable Lug Crimper Tool, Boxed 60Pcs Copper Ring Terminals. 8 sizes are available in the cable lugs set which is suitable for most a....
Check Stock

BestEquip Confined Space Tripod 8' Legs, 1800lbs Winch Confined Space Kit, 98' Cable Confined Space Rescue Tripod, with 32.8' Fall Protection, for Traditional Confined Spaces

  • Large Load Capacity: Maximum personal capacity: 397lbs/180kg.
  • Maximum vertical static capacity:660lbs/300kg. Manual Handle Force: ≤500N..
  • Aluminum Alloy Construction: Constructed of premium iron and high-quality aluminum alloy, the top plate treated through the die casting process, the tripod rescue kit is solid and durable. Yellow and black reflective sticker is for visibility..
  • Self Locking System: Cable diameter: 0.2inch/5mm.
  • Cable length: 98.4feet/30m (longer than others’). The 1800lbs man winch works with a self-locking device for rising and falling, and a falling protector with a durable hook, ensuring safety..
  • Adjustable Legs 2.45m Max: The legs of this tripod winch kit are length adjustable, from 5.2ft to 8ft. Three feet with rubberized pads are angle adjustable and anti-slip. It keeps stable with ring protection chains..
  • Various Application: The tripod with rescue winch is suitable for entry and rescue in confined space, such as well, sewer, underground pipe, and tunnel..
Check Stock

UST Refillable Floating Lighter with Waterproof Windproof and Impact Resistant Construction for Camping Backpacking Hiking and Outdoor Survival Black

  • DIMENSIONS: 2.6” H x 1.6” W x .6” D and weighs 0.8 oz empty with a fuel capacity of 0.04 fl. oz. of Quadruple-refined butane.
  • RELIABLE: The piezo-electric ignition lights up to 30,000 times, even when wet with a zinc die-cast wind guard and lever.
  • DURABLE: Features an impact-resistant, waterproof ABS plastic design with an O-ring sealed cover with a locking clasp closure and a windproof flame....
  • CONVENIENT: Buoyant design allows for the lighter to float when dropped into water.
  • EASE OF USE: Small and easy to use design allows for one handed operation.
Check Stock

UST Refillable Floating Lighter with Waterproof Windproof and Impact Resistant Construction for Camping Backpacking Hiking and Outdoor Survival Orange

  • DIMENSIONS: 2.6” H x 1.6” W x .6” D and weighs 0.8 oz empty with a fuel capacity of 0.04 fl. oz. of Quadruple-refined butane.
  • RELIABLE: The piezo-electric ignition lights up to 30,000 times, even when wet with a zinc die-cast wind guard and lever.
  • DURABLE: Features an impact-resistant, waterproof ABS plastic design with an O-ring sealed cover with a locking clasp closure and a windproof flame....
  • CONVENIENT: Buoyant design allows for the lighter to float when dropped into water.
  • EASE OF USE: Small and easy to use design allows for one handed operation.
Check Stock

BestEquip Confined Space Tripod Kit 1200LBS Winch, Confined Space Tripod 7' Leg Bracket and 98' Cable, Confined Space Rescue Tripod 32.8' Fall Protection for Traditional Confined Spaces

  • Large Load Capacity: Rated Load: 397 lbs/180 kg.
  • Manual Handle Force: ≤500 N. Our product can provide scientific and safe rescue and ensure users' security..
  • Aluminum Alloy Construction: Constructed of premium iron and high-quality aluminum alloy, the top plate treated through the die casting process, the tripod rescue kit is solid and durable. Yellow and black reflective sticker is for visibility..
  • Self Locking System & Fall Protector: Galvanized cable length: 99ft/30 m. The man winch works with a self-locking device for rising and falling, and a falling protector with a durable hook, ensuring security. Man Winch Continue Efficiency: 8:1..
  • Adjustable Legs 2.15m Max: The legs of this tripod winch kit are length adjustable, from 1.34-2.15 m/4-7 ft. Three feet with rubberized pads are angle adjustable and non-slip. It keeps stable with ring protection chains..
  • Various Application: The tripod with rescue winch is suitable for entry and rescue in confined space, such as well, sewer, underground pipe, and tunnel. It comes with two carry bags..
Check Stock

GEARWRENCH 42 Piece Ratcheting Tap & Die Set Metric - 3886

  • Die adapter works on round and hex shaped Dies.
  • Ratcheting T-handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8 Drive pass-thru ratchet and socket system as well as socket Accessories".
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

Redding Deluxe 3-Die Set 6.5 Creedmoor

  • Full Length Sizer Die (with decapping unit).
  • Expander Die for Gun Sets and Neck Sizing Die for Rifle Sets.
  • Profile or Taper Crimp Seater Die (with built in crimping ring and seater plug).
Check Stock