Top Die Steel Bar

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

  • Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
  • Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
  • Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
  • Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
  • Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.
Check Stock

Delta Faucet DF704PC Bath Hardware Accessory Toilet Paper Holder with Assist Bar, Polished Chrome

  • Developed with a rust-resistant and durable stainless steel bar and the finest die-cast zinc posts for superior strength and quality.
  • Classic and elegant spring-loaded paper holder with assist bar, providing leverage and support for up to 300 pounds.
  • 7/8" bar diameter for easier grip and slimmer look.
  • Polished chrome finish to complement chrome faucets and bathroom hardware.
  • Hides screws on the mounting flange with a secure cover.
Check Stock

knock offs Three Bar Chrome Plastic Spinner Cragar Keystone Center Caps Set of Four

  • Spinner bar is fixed unless otherwise noted.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
  • (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).
Check Stock

DELTA FAUCET 41550-BL Decor Contemporary Toilet Paper Holder with Assist Bar, Matte Black

  • Durable die-cast zinc posts and a stainless steel bar for a rust-resistant, top quality strength that's built to last.
  • Straight forward installation into studs with included instruction sheets and wood screws.
  • Simple and sleek pivoting toilet paper holder with assist bar, providing leverage and support for up to 300 lbs..
  • Matte Black makes a statement in your space, cultivating a sophisticated air and coordinating flawlessly with most other fixtures and accents.
Check Stock

Cruiser Accessories 15190 Neo Sport License Plate Frame, Brushed Nickel

  • This frame can be mounted with the personalization bar at the top or bottom of the license plate and does not obstruct the state or registration information.
  • Durable zinc die cast metal frame has a brushed nickel finish.
  • Designed to fit all standard 6x12 inch novelty/license plates.
  • User friendly and easy to install, see back of package for installation instructions.
  • Engraveable bar, which can be mounted at the top or bottom of the plate.
  • Cruiser Accessories' frames are made with high quality materials and workmanship, providing a durable product that will look good for years.
  • Distinctive license plate frames from cruiser make excellent gifts for any car owner.
Check Stock

Barsetto Espresso Machine with 20 capsule sampler pack

  • Stainless Steel Black upscale, modern design.
  • Used Espresso pods drop into storage compartment.
Check Stock

Preferred Bath Accessories 112-5BN Curved Shower Rod Brushed Nickel

  • 60-inch curved fixed shower rod (one piece rod).
  • Heavy-gauge stainless steel 1-inch by 1/2-inch rectangular bar with 6-inch bow.
  • Polished chrome PVD finished bracket assembly.
Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Espressione 8212S Fully Automatic Espresso Machine, Silver

  • Frothing mechanism to froth and foam milk, make cappuccinos and macchiato with ease.
  • Boiler/thermo block delivers precise water temperature during entire brewing process and regulates between frothing and brewing ensuring taste quality..
  • Built in stainless steel coffee grinder (extremely quiet-low noise-70db) with 5 Precise fineness settings-use your favorite beans to make the espresso you love!.
  • Thermoblock heater (die-cast aluminum with integrated stainless steel tube).
  • Hot water function allows you to make hot tea and other beverages.
  • ECO System with auto-stop (ASO) and programmable automatic shut-off.
  • Adjustable coffee dispenser and removable drip tray accommodates large cups and mugs.
  • Coffee size memory function for convenience.
Check Stock

AUTOTOOLHOME 1/4 inch HSS 4 Flutes End Mills Milling Cutter End Drill Bit Straight Shank Pack of 2

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • STRONG and DURABLE:The end mill bits are made from Ultra-fine tungsten steel bar, with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
Check Stock