Top Die cast Aluminum

Infinity Basslink Mini - Powered 6x8 underseat subwoofer - Titanium

  • 6" x 8" Underseat Subwoofer with 100W Amplifier.
  • Big Bass, Small Space - Infinity BassLink MINI delivers deep bass and takes up minimal space..
  • Intelligent Electronic Design for Reliable and Extraordinary Performance- The BassLink MINI employs high-pass filters and limiters that deliver....
  • Die-Casting Aluminum Enclosure Design- The all-die-cast aluminum enclosure design not only minimizes size but also eliminates rattles.
  • Bass Volume Remote Control- Bass Volume Remote control is included to let you adjust the sound from the driver’s seat..
Check Stock

Power Acoustik MOFO-124X MOFO 12-Inch Dual 4-Ohm VC 2700 Watt Pro Subwoofer,Black

  • 2.5" Dual 4-Ohm 4-Layer Voice Coil, Royal Blue Finish with Diamond Cut Accents, Die Cast Aluminum Voice Coil Heatsink.
  • Non-Pressed Pulp Cone, Polyether Foam Surround. RMS power handling: 1,500, efficiency (1w/1m): 85.40.
  • Nickel Plated 8ga Compression Wire Terminals, Dual Poly-Cotton Spiders, Die-Cast Aluminum Frame, Vented Pole Piece.
Check Stock

Iwatani Smokeless Korean Barbecue Grill YAKIMARU CB-SLG-1

  • body size: 303 (width) 278 (depth) 149 (height) mm / Weight: about 2.0kg / plate size (diameter): 233mm.
  • Material :( body): steel (powder coating) / (plate) aluminum die-casting (fluorine processing) / (burner) heat-resistant aluminum die-casting / (knob appliance plugs) ABS resin.
  • Continuous burning time: about 217 minutes ( when the temperature 20 ~ 25 , the measured value of the unexpired portion of the cassette gas one at high heat continuous combustion) / ignition system: piezoelectric ignition system / safety device: Pressure-sensitive safety equipment / container removable method: magnet system.
Check Stock

Rab Lighting HBHH100HQTVG HB HID Flood 100W MH QT HPF with Hood Verde Green

  • Housings: die cast aluminum with powder coat finish.
  • Set screw for hood, grill, or visor attachment.
  • Heavy duty mounting arm with internal O-ring, locking teeth, and stainless steel screw.
  • EZ Grip locknut matches fixture finish and can be adjusted with fingers, pliers or a screwdriver.
  • rugged die cast aluminum ballast housings with powder coat finish.
Check Stock

RVINGPRO 50 Amp 125/250 Volt RV/EV Power Outlet Box, Enclosed Lockable Weatherproof Outdoor Electrical NEMA 14-50R Receptacle Panel, Black, ETL Listed

  • Kit includes gasket and mounting hardware, closure plugs and self threading ground screws..
  • Bubble Cover has a Patented Multi-Configuration Design: Gang can be used horizontally or vertically, with up to 18 configurations, wheter GFCI, Duplex, Switch, or Round..
  • Outlet Cover is made of durable polycarbonate construction, lockable and easy to install, and fits full size padlock. Outlet Box is constructed of heavy duty die-cast aluminum with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit..
  • Outlet Box has Three (3) 1/2 Inch Outlet Holes. Heavy duty die-cast aluminum construction with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit.UL Listed. While-in-use bubble cover is UL Extra Duty Compliant (for Wet Locations, National Electrical Code 406.9 (B)(1)). NEC Compliant, UL File No. E362580.
  • Outlet box is 2-Inch Deep. Outlet Cover is 3-1/4" deep.Outlet Box has Three (3) 1/2 Inch Outlet Holes. Heavy duty die-cast aluminum construction with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit..
Check Stock

Sealproof 1-Gang Weatherproof Exterior In Use Outlet Cover and Box Kit - Metallic Electrical Outlet Box and UL Extra Duty, Lockable, In Use Outdoor Outlet Cover - Horizontal/Vertical Use

  • Kit includes gasket and mounting hardware, closure plugs and self threading ground screws..
  • Bubble Cover has a Patented Multi-Configuration Design: Gang can be used horizontally or vertically, with up to 18 configurations, wheter GFCI, Duplex, Switch, or Round..
  • Outlet Cover is made of durable polycarbonate construction, lockable and easy to install, and fits full size padlock. Outlet Box is constructed of heavy duty die-cast aluminum with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit..
  • Outlet Box has Three (3) 1/2 Inch Outlet Holes. Heavy duty die-cast aluminum construction with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit.UL Listed. While-in-use bubble cover is UL Extra Duty Compliant (for Wet Locations, National Electrical Code 406.9 (B)(1)). NEC Compliant, UL File No. E362580.
  • Outlet box is 2-Inch Deep. Outlet Cover is 3-1/4" deep.Outlet Box has Three (3) 1/2 Inch Outlet Holes. Heavy duty die-cast aluminum construction with a weatherproof powdercoat finish to protect it from the elements. Keeps rain and dirt from disrupting any electrical circuit..
Check Stock

LEDUR LED Rock Lights White 4 PCS Waterproof LED Neon Underglow Light Compatible with Jeep ATV SUV Offroad Truck Boat Underbody Glow Trail Rig Lamp

  • LEDUR LED rock light kits: Adopt solid Aluminum Construction With Toughed Glass, Die-Cast Aluminum Shell With Toughed Glass, Good Heat Dissipation, Durable, Permanent Will Not Fade. This LED Rock Light has Highly Resistant To Heavy Impacts. LED Rock Lights kit will boost your night time driving efficiency, You can see road clearly in whatever conditions, and could work at all conditions..
  • High Quality and Performance: Made of CREE LED XBD chips technology & Die cast black durable Aluminum housing With Toughed Glass and PC lens reinforced.long term use does not exist lens yellowing. Durable, permanent will not fade, waterproof, shockproof, dust-proof, quake-proof, Rust-Proof and anti corrosion. Unique design of vertical cooling system, improve heat dissipation efficiency, keeping your car safely..
  • Led Rock Light Kits: Voltage: 9-30V, Power: 9W, Die-cast Aluminum Housing & PC Lens, waterproofing grade: IP67, LED Quantity: 3PCS LED XBD,Size: 2.76"(approximately), International certification: CE, RoHs. White Light, Super bright, Longer working life, it up to 50000 hours..
  • Widely Application-Engineering vehicles: Compatible with excavator,road roller, bulldozer, crane, fork lift and mining truck etc.Specialized vehicles: fire engine, police car, rescue vehic....
Check Stock

HFS R Two Axis Welding Clamp Angle Clamps Aluminium Max Open 2-3/4 Width 3-1/2 Depth 1-1/3

  • [MATERIAL]: Aluminum alloy die casting clamp body.Surface spray treatment.
  • [OPERATION METHOD]: First of all, rotate the handle to fix and press the corner of the square pipe, and then weld.
  • [STRONG AND DURABLE]: Because the clamp body is made of aluminum alloy die casting, it is strong and durable, with long service life and can be....
  • [APPLICATION]: Very suitable for aligning and fixing work pieces, for welding perfect 90 degree angles on square tubes..
Check Stock

AudioPipe TXX-BDC4-10 10 Inch 1800 Watt High Performance Powerful 4 Ohm DVC Vehicle Car Sub Audio Subwoofer Speaker System, Black

  • Hifonics BRUTUS subwoofer with dual 4 Ohm design delivers 3000 watts and features heavy gauge, powder-coated, aluminum die-cast basket..
  • Vented aluminum former holds a 3" voice coil while allowing the heat to be exchanged. (Less heat means less distortion).
  • Specialized Hifonics dual poly cotton spider with double centering allows the woofer to handle more power with minimum distortions..
  • Hifonics heavy duty aluminum die-cast basket allows back venting, which exchanges heat with cool air, resulting in more power handling and increased reliability..
  • Vented high energy motor assembly with dual 70oz magnets increases power handling and increases SPL..
Check Stock

iShoot Foldable Telephoto Lens Bracket, All-Metal Long-Focus Lens Support, Lens Holder with 20cm Quick Release Plate for Arca-Swiss Fit Tripod Ball Head, Compatible with Canon Nikon Sony Cameras

  • 1. All parts of the foldable telephoto lens bracket are die-casting of aluminum alloy, surface polished, high temperature automotive painted, lightweight and rugged, weight about 520g.
  • Both sides with precision scales, skeleton structure in whole, designed with spirit level.
  • 2. Quick release plate of the long-focus lens support is die-casting of double aluminum plates of 7.5mm thick, 200mm long and 38mm wide, with RRS / ARCA-SWISS Standard interface.
  • back side with two 3/8 " screw holes, two 3/8" to 1/4" adapter screws provided.
  • 3. Knob between the two plates is for locking lens, about 50mm in diameter, built-in 1/4" screw.
  • Pallet is die-casting of double aluminum plates of 8mm thick, built-in self-locking device.
  • 4. Aluminum tube?s height can be adjusted to adapt to different volumes of the camera body.
  • built-in a metal shaft, one end is 1/4" screw, and the other end is butterfly-type knob.
  • 5. Quick release plate is RRS / ARCA-SWISS standard fit, compatible with RRS / ARCA-SWISS / KIRK / Wimberley / MARKINS / SUNWAYFOTO / kangrinpoche / BENRO / SIRUI / MARSACE ball head and clamp of AS standard, suitable for iShoot IS-JZ30 / IS-JZ50 / IS-JZ64 / IS-QJ58 / IS-QJ64 / IS-JZ60BK etc..
Check Stock

MasterPan Non-Stick Cast Aluminium 2-Section Meal Skillet 11 Black

  • NON-STICK and STAIN RESISTANT - MasterPan uses Whit ford's XYLAN PLUS double layer non-stick coating which is PFOA free. Food comes right off the pan....
  • Energy efficient induction base: Distributes heat evenly: Allows you to cook on any stove hob and will distribute the heat evenly resulting in a....
  • OVEN and DISHWASHER SAFE - Once you're done cooking with the MasterPan you can put it in the dishwasher or place it under hot water for an easy clean.....
  • The Masterpan’s are 100% Die Cast Aluminum : We used die cast aluminum which is an excellent heat conductor to ensure even heat distribution....
  • Detachable Bakelite Handle: The MasterPan’s are also built with an ergonomic detachable Bakelite handle which makes it oven safe up to 350 degrees.
Check Stock

GasOne Camping Stove Bottletop Propane Tank Camp Stove with Waterproof Carry Bag

  • EASILY PORTABLE - Made with transportability in mind, the GS-8000 is compact and easily accessible.
  • the burner is carried in separate pieces to allow....
  • DIE CAST ALUMINUM - The GS-8000, unlike most competitor products, is made with die-cast aluminum allowing for a long lasting, rust-free appliance....
  • HIGH QUALITY CARRY BAG - The stove includes a durable, high quality carry bag for the users convenience.
  • designed specifically for the portable stove,....
  • CONVENIENT BOTTLE HOLDER - A stable base and 1lb propane bottle holder is included with the stove to make sure the fuel source stays locked in place....
  • HIGH OUTPUT - the GS-8000 has a powerful BTU that allows for users to timely fry, stir, or boil their food, water, or soup in a flash.
Check Stock