Top Die cut Kapton

2) Pyramid PRO TW57 3

  • BRAND NEW *Pyramid TW57* 3'' 2000 Watt Titanium Super Tweeters.
Check Stock

3.75'' Titanium Horn Tweeter (Pair) - Aluminum Bullet Diamond Chrome Cutting Finish w/ 300 Watt Peak 20 oz Magnet Structure 2kHz - 25kHz Frequency Response 4 Ohm & 1\ Kapton Voice Coil - Pyle PDBT18

  • 2kHz - 25kHz FREQUENCY RESPONSE: Pyle, 3.75'' aluminum bullet titanium horn tweeter has a 20 oz magnet structure, ferrofluid enhanced voice coil and frequency response. This car speaker is pack with exceptional 99dB (1w/1m) decibel sensitivity.
  • 1'' KAPTON VOICE COIL: Pyle car sound speaker system is capable of 1'' high-temperature kapton voice coil. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures.
  • 150W RMS AND 300W PEAK: This car speaker can provide up to 150 watts RMS or 300 watts peak power because it is 20 oz magnet structure. A pair of round 3.75'' 300 watt tweeters - carrying both the high and low end for a fuller range sound.
  • CHROME CUTTING FINISH: This car speaker super tweeter is diamond chrome cutting finish. The tweeter measures 3.75'' in overall diameter in a mounting depth at 2''. The product includes mylar crossover capacitor.
  • LOUD AND CLEAR: Pyle car speaker super tweeter were carefully combined to reproduce sound clearly with outstanding responsiveness. It features solid construction and accurate power handling ratings.
  • 3.75 Aluminum horn with 1 super bullet tweeter.
Check Stock

Rockville HT120 2 360w Car/Pro Aluminum Horn Titanium Tweeter w/ 2 Voice Coil Black

  • What's in the Box: (1) HT120 Tweeter pre-Installed in an aluminum horn, Mounting Screws, Warranty Card, Owner's Manual.
  • Rockville HT120 360w Aluminum Horn Titanium Tweeter with 2" Voice Coil, Top of the line Rockville high frequency driver pre installed in an aluminum horn, Titanium diaphragm tweeter, Bolt-on style system, Type: Compression driver.
  • RMS Power: 120W, MAX Power: 360W, Sensitivity: 105dB @ 1w / 1m, 34 oz Magnet, 2” High Temperature Die Cast Kapton Voice Coil.
  • Ferro Fluid Enhanced Voice Coil Cooling, Impedance: 8 Ohms, Frequency Response: 800Hz - 20kHz, We recommend using a crossover that cuts frequencies below 1500 to 3000Hz at -12dB per octave, Our metal horns are heavier and a denser material which ensures they will not generate resonances and unwanted vibrations that can alter the response of the speaker. Also our metal horns will never break even if you go over bumps while driving.
  • Horn Dimensions: 6.2” x 6.2” x 5.1” (158 x 158 x 130 mm), Throat Diameter: 2", Overall Depth: 7.6” (193 mm), Cutout Diameter: 5.79”, Mounting Depth: 7.36”, Extremely loud and clear highs with an amazing frequency response that can even play some mids, Shallow Mounting Depth.
Check Stock

Bugsy Malone [Blu-ray]

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked....
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for....
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful....
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel....
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary....
Check Stock

Goldwood Sound GW-206/8 OEM 6.5″ Woofer 180 Watts 8ohm Replacement Speaker

  • ...ill maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure – sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28″ mounting depth & 8.8″ overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker’s mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone – Flat Progressive Spider – 600 Watt Max Power Handling – Mounting Depth: 4.28”.
  • Non-Fatiguing Big Rubber Suspension – New Wave-Like Rubber Gasket – Impedance:4 O....
Check Stock

Audiopipe Car Audio Package with 4 8 Inch Midwoofer Loudspeakers and 2 3.75 Inch Titanium Pro Tweeters

  • PACKAGE: Audiopipe package includes 4 APMB-8SB-C 8-Inch 250-Watt Low Mid Frequency Loudspeaker and 2 ATR-3721 3.75-inch 350-Watt Titanium Pro Tweeters.
  • LOUDSPEAKER POWER: 250-watt peak power, impedance of 8 ohms, input sensitivity of 99 dB, and frequency response range 350-5000 Hz.
  • LOUDSPEAKER DESIGN: 8-inch cone in steel basket, 20-ounce magnet, with mounting depth at 2.875-inches, and 1.5-inch high temperature Kapton voice coil.
  • TWEETER POWER: 350-watt peak power, impedance of 4-8 ohms, input sensitivity of 99 dB, and frequency response range 2k-25kHz.
  • TWEETER DESIGN: 3.75-inch aluminum horn with 1-inch titanium super bullet tweeter with diamond chrome cutting finish, 20-ounce magnet, Ferro fluid enhanced voice coil, and 1-inch high temperature Kapton voice coil.
Check Stock

Lanzar MAXP154D MaxPro Series Small 4Ω Dual Subwoofer (15', 2,000 Watts)

  • 1000 WATT POWER: This car subwoofer has 1000 Watt peak power that will produce high sound resonance. It also has 65 + 65 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance.
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 12.09".
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time.
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.0dB and a special designed rubber magnet boot.
  • 6.42” MOUNTING DEPTH: Easy to install with its 6.42” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

3 Car Audio Speaker Tweeter - 1000 Watt High Power 3 Inch Super Titanium Tweeter System w/ Die Cast Aluminum Frame, 1.5k - 25 kHz Frequency, 112 dB, 4-8 Ohm, Heavy Duty 150 oz Magnet - Pyramid TW67

  • 1.5'' High-Temperature Kapton Voice Coil.
Check Stock

We-buys Cutting Dies C Plate Replacement Adapter Mat Clear 5.9'×7.6'

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting.Plate thickness is 3mm.
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

(2) Pairs MB QUART FSB216 6.5' 280 Watt Car Audio Component Speakers

  • ...ossover Slope: 12 dB. Tweeter Dome Material: Aluminum dome tweeters deliver great sound with increased reliability.
  • Speaker Surround: Butyl rubber surrounds provide durability and deeper mid-bass impact. Voice Coil: Pure Copper voice coil creates a strong magnetic field with a very thin extrusion. Voice Coil Former: Kapton voice coil former is lightweight and efficiently dissipates heat. Spider: Natural fiber allows flexibility while the infused epoxy gives strength during the manufacturing process. Cone Material: Lightweight thermal-formed polypropylene cones enable faster midrange response.
  • Surround/Cone Coupling: The cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather. Gasket: A textured ABS gasket assures a rigid linear seal to the mounting surface. Tinsel Leads: Highly conductive while remaining flexible during high power applications. Cooling System: Over-coil cooling system allows air exchange over the voice coil through the spider.
  • External Component Crossover: External Passive Butterworth crossover for a smooth transition of frequencies from midrange/midbass to the tweeter element designed into a compact crossover housing that can be easily hidden in....
Check Stock

Car Vehicle Subwoofer Audio Speaker - 8 Inch Blue Injection Molded Cone, Blue Chrome-Plated Steel Basket, Dual Voice Coil 4 Ohm Impedance, 600 Watt Power, for Vehicle Stereo Sound System - Pyle PLBW84

  • ...ill maximize sound quality while minimizing noise and distortion.
  • 60 OZ MAGNET STRUCTURE: Built with 60 oz. magnet and a rubber magnet boot that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 83.5dB to resonate perfect clarity.
  • 1.5” DUAL KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure - sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28" mounting depth & 8.8" overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker's mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone - Flat Progressive Spider - 600 Watt Max Power Handling - Mounting Depth: 4.28''.
  • Non-Fatiguing Big Rubber Suspension - New Wave-Like Rubber Gasket - Impedance:4 Ohm (Per Coil).
Check Stock