Top Differential Bushing Press

Kluson Revolution Tuners 3x3 No Collar Locking Pearloid button Gold KEDPNCL3-G

  • Kluson Revolution 19:1 'Gibson' mount with pearloid buttons, Locking Vintage style Gold KEDPNCL3-G.
  • For the first time, a locking drop-in upgrade for instruments with Gibson style 2 hole mount and vintage (11/32" or 8.7mm) peghead hole. These normally use a press-in bushing rather than a screw in bushing..
  • Introducing the NEW Kluson Revolution G-mount 19:1 high ratio tuning machine. Kluson has truly introduced a game changer with the traditional footprint and newly designed sealed die-cast housing. These state of the art tuners are designed to directly retrofit vintage tuners with a push-in bushing, traditional Kluson two-screw mounting pattern and vintage 11/32 inch peghole. The vintage outline, pearloid plastic keystone button and pin-stripes pay tribute to Kluson heritage while the brand new.
  • SportHiTech are authorized Kluson dealers, and all products are factory-fresh and carry full manufacturer warranty, and are shipped in original retail packaging..
Check Stock

Hornady Lock-N-Load AP Press Loader – Ammunition Reloading Press with Quick Change Lock-N-Load Bushing System, EZ-JECT System and Powder Measure – Enjoy Fast and Reliable Reloading – Item 095100

  • Lock-N-Load Auto Progressive Reloading Press – Reload up to 500 rounds per hour with this professional grade, auto indexing, 5 station progressive press that features the patented Lock-N-Load bushing system. This must-have Hornady reloading equipment is intuitive and well equipped for all your reloading needs.
  • Fast Reloading – Lock-N-Load technology allows you to stop loading, change dies and start loading another caliber in a matter of seconds thanks to the 5 station bushing system. Switch from 223 to 45 in less than 5 minutes.
  • Quick and Reliable Ammunition Press – The Lock-N-Load powder measure uses quick change metering inserts that allow you to switch from one powder to another with a push of a button. The EZ-JECT system ensures a reliable ejection of cartridges, every time without adjustments.
  • Smooth and Precise – With a single pull of the handle, you’ll feel the smooth responsiveness, the rugged construction, and most of all, the power on this single stage reloading press! And since the AP features automatic indexing, priming and ejection, every pull of the handle give you a precisely loaded round.
  • What's Included – Hornady AP Press Item 095100. Includes 5 Lock-N-Load Die Bushings, 1 large cartridge bin, primer pickup tubes, metering in....
Check Stock

Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....
Check Stock

Taidacent THS4131 Fully Differential Input/Output Low Noise Amplifier Module Single Ended to Differential Single Ended Input Double Ended Output

  • Name: THS4131 Fully Differential Amplifier Size: 45mm X 34mm Supply Voltage Range: 5V Single Supply ±15V Dual Supply.
  • This module can implement single-ended to differential, single-ended input, and double-ended output. Has high performance, low noise, wide power supply voltage range and other advantages..
  • The THS413x consists of a true fully differential signal path from input to output. This design produced excellent common-mode noise suppression wells that improved total harmonic distortion..
  • Chip features High performance 150 MHz - 3 dB bandwidth (VCC = ±15V) 51V/us slew rate -100dB third harmonic distortion (250kHz) 2. Low noise 1.3 nV/vHz Input Reference Noise Differential input/cent output Balanced Output Suppresses Common Mode Noise Reduce second harmonic distortion from dry differential output.
  • Wide supply voltage range VCC-5 V Single Supply to ±15V Dual Supply ICC (SD) = 860 u A Shutdown Mode (THS4130) Chip application Single-ended to differential conversion Differential ADC Driver Differential antialiasing Differential transmitters and receivers Output Level Translator.
Check Stock

Lee Precision Breech Lock Challenger Kit (Red)

  • Includes a set of 11 Auto-Prime Shell Holders.
  • Kit includes the Breech Lock Challenger Press and one Breech lock quick change bushing.
  • This kit is perfect for those who prefer to prime off the press.
Check Stock

Taidacent AD8130 Differential Receiver Amplifier Module Differential to Single-ended High Common-mode Rejection Ratio Low Noise Low Distortion

  • Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V.
  • The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal..
  • Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively..
  • Chip features 1. High speed AD8130: 270 MHz, 1090 V/us (G= +1) AD8129: 200 MHz, 1060 V/us (G= +10) 2. High Common Mode Rejection Ratio (CMRR) 94 dB (minimum, DCE100 kHz) 80 dB (minimum, 2 MHz) 70 dB (10 MHz) 3. High input impedance: 1 MQ differential 4. Low noise AD8130: 12.5 nV/Hz AD8129: 4.5 nV/vHz.
  • 5. Input common mode range: ±10.5V 6 low distortion, 1V peak-to-peak (5 MHz): AD8130, -79 dBc (Worst Harmonic, 5 MHz AD8129, -74 dBc (Worst Harmonic, 5 MHz) 7. User adjustable gain G= +1 without external components 8. Supply Voltage Range: +4.5V to ±12.6V 9. Power saving mode.
Check Stock

Penn State Industries PK4XSS 4-in-1 Multi-Function Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (3) 4-in-1 Multi-Function Pen Woodturning Kits. You will receive (1) of each in 24kt Gold (PK4X24), Chrome (PK4XCH), and Gun Metal (PK4XGM)..
  • Also includes the bushing set (PKVESBU) needed to make the pens. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/4"..
  • Features an 10mm single tube design, a gravity assisted mechanism, (3) mini ballpoint refills, and a .7mm lead refill. For the mini refills, you will receive (1) of each in black, blue, and red..
  • Black, blue, red ballpoint pen and .7mm mechanical pencil all in one. Gravity assisted mechanism works like magic so you can easily choose your ballpoint ink or pencil. Just hold parallel to the floor, rotate the pen in your hand until the desired color is face up, and the press the click button. To retract and change refills, simply press the switch on the clip..
Check Stock

Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks

  • 1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
  • 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
  • 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..
Check Stock

AISIN CKT-063 Clutch Kit

  • Designed for efficient, consistent performance and manufactured using only the highest quality materials.
  • With superior OE technology and know-how, Aisin ensures that every differential lock actuator provides perfect OE form, fit, and function.
  • Differential lock actuator engages locking function, changing differential from open to locked configuration.
  • Unit mounts directly to the differential.
Check Stock

Traxxas 5137 Differential Oil, 50,000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Traxxas 5136 Differential Oil, 30, 000 Weight

  • Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential.
  • Altering the limited slip capability can enhance turning performance for faster exit speeds.
  • Higher weights result in more differential locking action.
  • Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.
Check Stock

Ehdis Manometer Gas Pressure Tester Digital Air Pressure Meter Differential Pressure Gauge HVAC Gas Pressure Tester

  • This digital handheld manometers can measure the air pressure of the single pipe， or differential pressure of two pipes.it is suitable for measuring of ventilation and air condition systems,and widely use forgas measurement,calibration,and any trouble shooting of any gas pressure systems..
  • Ultra-low-power sensing & measurement with 32-bit MCU and 24-bit ADC make the measurement of air press faster and more accurately.Perfect for working on tankless heaters,Very handy to set gas pressures on electric valves,Using for service testing of gas pressure on domestic boilers, Measures Air Flow about your bathroom fan ect..
  • 12 Selectable Units of Measure (kPa, Psi, Kgfcm2, Ozin2, Bar, mbar, inHg, mmHg, InH2O, FtH2O, cmH2O, Pa) with function: Data Hold and Error Code - Response Time: 0.5 Sec..
  • Ehdis digital manometer has Dual Input that can test / measure the differential gas pressure with its provided twin input probes.Max / minimum record function.
  • Data save function, also has room temperature future..
Check Stock