Top Differential Pressure Flow Meter

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
⑥ max temp of tested liquid: 158°F/70°C.
MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..

Check Stock

Casio Men's 'PRO TREK' Tough Solar Powered and Stainless Steel Watch, Color:Green (Model: PRW-3510Y-8CR)

Tough Solar power, Silicon band, Direction Bezel, Mineral Glass, Black IP, 200-meter water resistance, LED Backlight.
Low-temperature resistant (-10 degree celsius), Calibration Signals, Digital Compass, Altimeter, Barometer, Thermometer, World Time, Full auto-calendar.
Water resistant 200m (660ft): in general, suitable for professional marine activity and serious surface water sports, but not diving.
Barometer Display range: 260 to 1,100 hPa (7.65 to 32.45 inHg) Display unit: 1 hPa (0.05 inHg) Atmospheric pressure tendency graph (past 42 hours of readings) Atmospheric pressure differential graphic Barometric pressure tendency information alarm (beep and arrow indicate significant changes in pressure).

Check Stock

PROWELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Accessory for Welding Machine

PROWELD Argon / CO2 Regulator and Flow Meter is a pressure reduction equipment to reduce the pressure of cylinder holding various kind of gas under....
Outlet of the Flowmeter will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It comes with a standard 1/4" barbed fitting..
Can retain steady pressure output even the input pressure and input flux changes. Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated....
Argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
Majorly used for welding,slicing,chemical industry,analyzing,testing and other industry usage..

Check Stock

Pentair Pentek PCC-1 Phosphate Water Filter, 10-Inch, Under Sink Hexametaphosphate Crystal Replacement Cartridge, Fits #10 Standard Filter Housing

Better flow characteristics: lower pressure drop and improved flow stability.
Improved efficiency: cleans oil in less time and improved reliability.
Higher dirt holding capacity: longer element life, lower maintenance costs (labor) and decreased inventory costs (parts).
Multi-layer construction: each layer performs a distinct function and double layer of Excellement (Z) media.
Beta stability: Excellement (Z) media maintains efficiency as differential pressure increases.

Check Stock

testo 300 Kit - Commercial Combustion Analyzer Kit with Bluetooth printer I CO Meter for flue gas, draft, differential pressure and ambient CO levels of heating systems

Efficient: The combustion tool was made for the challenges of intensive daily use and measures carbon monoxide and O2 level, temperature, draft, and differential pressure.
Commercial Use: Easily carry out legally prescribed measurements thanks to the integrated fine pressure and 4 Pa measurement, as well as instant draft and gas zeroing.
Easy application: Start measuring from standby mode at the touch of a button. Extra strong magnets at the back of the meter enable a hands free and secure measuring operation.
Durable: The flue gas meter is equipped with an extremely sensitive CO and O2 sensor with up to 6 years of life expectancy and a measuring range up to 4,000 ppm.
Complete Set: O2 and CO sensors ((4,000 ppm), power supply (USB), probes and filters, easyHeat software, wireless printer and spare thermal paper.

Check Stock

Solimeta 2-1/2\ Dial Size,Glycerin Filled Pressure Gauge, 0-200psi/kpa, 304 Stainless Steel Case, 1/4\NPT Lower Mount

[ 11 Selectable Units&High Accurate ] This gas pressure meter features 11 selectable units of measure.The device measures gauge and differential pressure in the range of ±2 psi, High resolution(0.001psi) gauge..
Date Hold & Max/Min/Avg Recording ] Pressthe HOLD button momentarily to freeze the displayed reading. Zero function for offset correction or measurement.Press REC button to access the MIN/MAX/AVG recording mode..
Portable ] The digital gas manometer dimensions:5.79" x 2.16" x1.26.

Check Stock

Hti-Xintai Digital Manometer, Dual Port Air Pressure Meter Pressure Gauge HVAC Gas Tester, Large LCD Display with Backlight, Basic

[ 11 Selectable Units&High Accurate ] This gas pressure meter features 11 selectable units of measure.The device measures gauge and differential pressure in the range of ±2 psi, High resolution(0.001psi) gauge..
[ Date Hold & Max/Min/Avg Recording ] Pressthe HOLD button momentarily to freeze the displayed reading. Zero function for offset correction or measurement.Press REC button to access the MIN/MAX/AVG recording mode..
[ Portable ] The digital gas manometer dimensions:5.79" x 2.16" x1.26.

Check Stock

Ancel S3000 EVAP Automotive Smoke Machine Leak Vacuum Diagnostic Tester with Oil Level Gauge & Air Flowmeter for All Vehicle Boat Truck Motorcycle

...nsation/EGR system, vacuum system, turbine system, intake manifold, vacuum line, etc..
[High performance and high-quality metal structure] Compared to other simple smoke leak diagnostic testers, the ANCEL S3000 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure from 0.8 to 14.5 psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process..
[Pressure gauge+adjustable flow meter] You can judge whether the tested system has a leak by the pressure change of the pressure gauge. By adjusting the size of the flow meter, you can also better control the amount of visible smoke to locate specific leaks. There are separate air mode and smoke modes to meet your different needs..
[Easy operation] A few simple steps can help you detect leaks in the vehicle system. (1) Add tobacco oil (USP mineral oil/baby oil), you need to buy it separately. (2) Check the power cord (12V DC car battery). (3) Connect the system and test for leaks..

Check Stock

Schroeder KZ3 Hydraulic Filter Cartridge, Z-Media, Micro-Glass, Removes Rust, Metallic Debris, Fibers, Dirt; 9\ Height, 3.9\ OD, 1.625\ ID, 3 Micron

Better flow characteristics: lower pressure drop and improved flow stability.
Improved efficiency: cleans oil in less time and improved reliability.
Higher dirt holding capacity: Longer element life, lower maintenance costs (labor) and decreased.
Multi-layer construction: each layer performs a distinct function and double layer of Excellement (Z) media.
Beta stability: excellement (Z) media maintains efficiency as differential pressure increases.

Check Stock

DANFOSS 013G-8015 Straight HOT Water/Low Pressure/STEAM Nickel Plated 1/2 in Valve Thermostatic Radiator 10 PSI 250 Degree F

Actuator Size: 9 mm | Actuator Size [in]: 0.35 in | Actuator System [mm]: 9 mm | Ambient Temperature max [°C]: 50°C | Body material: Brass |....
Differential pressure [bar] [Max]: 11 bar | Differential pressure [bar] [Min]: 0 bar | Differential pressure [psi] [Max]: 160 psi | Differential....
Maximum Working Pressure [psig]: 160 psig | Media recommendations: Technical Water | Media tolerance comments: Neutral media | Number of Ways: 2/2 |....
Tightness: Internally: Better than 8.3 x 10-2 mbar l/sec (5 ccm air per min).
Externally: Better than 1 x 10-3 mbar l/sec (100% He) | Viscosity: Max.....
Supply Scope: 1 unit of Danfoss EV210A, Instruction Manual | Applications: Water, Steam, Oil, Compressed Air, Aggressive Liquids and Gases, Industrial....

Check Stock

6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings

Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.

Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..

Check Stock