Top Digital Electricity Meter

Upgraded Watt Meter Power Meter Plug Home Electricity Usage Monitor, Electrical Usage Monitor Consumption, Energy Voltage Amps Kill Meter Tester with Backlight, Overload Protection, 7 Modes Display

  • ...amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time..
  • 【Upgraded LCD display】: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers. Backlight time: 10 minutes..
  • 【Overload protection】: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting..
  • 【Data Memory Function】: The wattage meter will r....
Check Stock

TPI 135 Manual-Ranging, Average-Sensing Digital Multimeter with Protective Boot, 750VAC, 1000VDC, 10 Amp, 40 Megaohms, 20,000 Microfarads

  • Digital multimeter measures voltage, current, resistance, and capacitance.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform.
  • Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit’s diodes.
  • Hold function keeps a reading on the LCD, even after the meter is disconnected.
  • Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1,000V and Category III installations up to 600V.
Check Stock

Suraielec Watt Meter, Plug-in Socket Power Meter, Auto Cost Calculator, Backlit Large Display, Overload Protection, Kilowatt Wattage Voltage AMP Tester, Electricity Usage Electrical Energy Monitor

  • 【 Monitoring Electric Usage and Know Cost Intuitively 】 Power consumption meter can measure power (W), volts, amps, frequency, power factor, maximum and minimum power (W), cumulative time and energy (kWh), and calculate cost automatically after price-setting.
  • monitoring home energy usage and help you to save electricity cost.
  • 【 Large Clear LCD Display with Backlight 】 Electricity monitor kilowatt meter has a wide view angle and clear-digit display.
  • easy to read and operate the electricity monitor in dark areas with the backlit clear LCD display.
  • 【 Long Time Data Hold Memory Function 】 Come with built-in rechargeable battery backup, the watt meter power analyzer can hold data up to 90 days when coming across a power outage or plugging out the meter from the outlet.
  • all data includes the cost setting will go to zero once press the reset button.
  • 【 Potable and Takes up 1 Outlet Only 】 Compact size.
  • power meter socket plug leaves the lower wall outlet available when plugging into the upper outlet.
  • made of high-quality fire-resistant material.
  • friendly after-sale customer service and 1-year limited warranty.
  • Note: do not compatible with AC inverter and solar power inverter.
  • 【 3680W Overload Indication 】 This power monitor meter can measure ....
Check Stock

YOUTHINK Electricity Usage Monitor, Plug in Power Consumption Meter Home Energy Consumption Analyzer with Digital LCD Display Overload Protection Watt Volt Amps Wattage KWH

  • ...accumulate kWh circuit memory , easy to read and record data..
  • OVERLOAD PROTECTION: When the power of the whole machine exceeds the rated power of the display 1650W, the LCD will display "overload" with a roar to warn the user, and automatically disconnect the power supply of the plug-in ammeter, allowing you to use electricity safely and securely..
  • MULTIPLE PARAMETER MEASUREMENT: CO₂ emissions (CO₂/KG), power (W), energy (KWh), voltage/Hz, amps/Hz, power factor, min power and max power, 8 modes of household kilowatt meter for you choose..
  • DATA HOLD FUNCTION: The power meter can store the last data, when you unplug the appliance from the meter or unplug the meter from the outlet, it will save the last data. If you are not satisfied, please feel free to contact us, we take full responsibility for the product quality of household kilowatt meters..
Check Stock

Digital PH Meter,Backlight PH Meter 0.01 High Accuracy Water Quality Tester,PH Range is 0-14,Suitable for Drinking Water Swimming Pool and Aquarium Water PH Tester Design,with ATC

  • [Test your water with this TDS and EC meter] - Is your water pure and drinkable? With the push of a button, the TDS water quality tester will tell you your overall water purity level, which will be displayed on the screen in ppm. Our pen can quickly display the conductivity level of water (Conducts Electricity (EC)) also.
  • it means the dissolved minerals (ions) in water are what conduct the electricity. Finally, you will know the level of pollution and mineralization of water..
  • [Automatic temperature compensation] - There is no need to worry about the temperature of the test liquid affecting the measurement results, as both the pH meter and TDS meter have an automatic temperature compensation function that adjusts to the water temperature.
  • [pH tester] Full measurement range of pH 0 - 14, reliable and quick readings. How to calibrate pH pen - Press CAL key for 5 seconds to enter calibration mode, then press to select 6.86, 4.00, 9.18 corresponding powder to finish calibration, pH pen electrode is easily affected by the environment, if not used often, calibration before use will get accurate measurement results, regular use will keep the accuracy of measurement.
  • [Great for all home and laboratory] TDS & & EC and pH testing applications inc....
Check Stock

HBN Electricity Usage Monitor LCD Plug in Power Meter Digital Cost Watt/VA KWH/Hour Hz/PH Voltage Amp Meter, 9 Display Modes for Energy Saving, Watt Meter Outlet, Power Consumption Monitor

  • 【Saving Money & Energy】: This power energy monitor will calculate the cost automatically by unit price-setting. Pressing the Cost button, you can read the electricity expenses by the hour, day, week, month, or year..
  • 【Data Memory Function】: Our plug in electrical meter can store all non-real-time data, such as KWH, Elapsed Time, and Total Cost. Worrying about power failure to lose the information is Unnecessary. There is still a reset button for clearing all the cumulative data..
  • 【Easy To Use】: This electricity energy monitor can measure 2 Power parameters(Watt/VA), Kilowatt and Elapsed Time(KWh/Hour), Power Frequency and Factor(Hz/PF), Volt, Amp, and Cost. Only need to push buttons to set 9 display modes!.
  • 【Upgraded Large Digital LCD Display】: Our plug in electrical meter has a large LCD display. It can show all parameters clearly. The wide view visible is easy for reading. Operating will be more convenient..
  • 【Compatibility】: Rated Voltage 125VAC, 60Hz, Maximum 15A 1875W resistance and tungsten, 1 / 2HP. All parameters have the maximum display range of the ....
Check Stock

Fluke 323 Clamp Meter For Commercial/Residential Electricians Measures AC Current To 400 A,Measures AC/DC Voltage To 600 V Includes 2 Year Warranty And Soft Carrying Case,Multicolor,8 x3 x2

  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current.
  • The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform.
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V.
Check Stock

kuman KW47-US Electricity Usage Monitor Plug Power Watt Voltage Amps Meter with Digital LCD, Overload Protection and 7 Display Modes for Energy Saving (NO-Backlight), white

  • Electricity usage monitor: Monitor is the killer of the high-cost energy appliance, helping you lower power consumption and save money..
  • Digital LCD Display: Large clear LCD display for easy reading, the screen size is 47cmx60cm..
  • Various Parameters: Power(W), Energy (kWh), Voltage, Amps, Power Factor, Cost and Minimum & Maximum Power, ideal for energy consumption monitor..
  • Overload Protection: Once the whole power exceeds the rated power of monitor, LCD will display "OVERLOAD" with booming noise to remind the user.
  • Built-in Battery:With 3.6V rechargeable battery(NI-MH), It can store electricity. which allows meter to be moved and viewed without losing readings..
Check Stock

TPI 100 EZ One Button Digital Multimeter with Protective Boot 40 Megaohms Resistance 600V AC/DC Voltage

  • Auto-ranging digital multimeter measures voltage and resistance, and performs continuity tests.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
  • Audible continuity sensor confirms that the circuit conducts electricity.
  • Molded rubber boot helps protect against damage from falls, impacts, and abrasion.
  • Meets IEC safety standard 61010 and is certified for Category II installations up to 1000V and Category III installations up to 600V.
Check Stock

Divolight [pH and TDS & EC Tester kit] pH Meter Digital Accuracy 0.01 Lab Pen Type and 3-in-1 TDS and EC Meter, PPM and µS Meter for Water, Practical Water Testing Kit pH and TDS EC Meter Combo

  • [Test your water with this TDS and EC meter] - Is your water pure and drinkable? With the push of a button, the TDS water quality tester will tell you your overall water purity level, which will be displayed on the screen in ppm. Our pen can quickly display the conductivity level of water (Conducts Electricity (EC)) also.
  • it means the dissolved minerals (ions) in water are what conduct the electricity. Finally, you will know the level of pollution and mineralization of water..
  • [Automatic temperature compensation] - There is no need to worry about the temperature of the test liquid affecting the measurement results, as both the pH meter and TDS meter have an automatic temperature compensation function that adjusts to the water temperature.
  • [pH tester] Full measurement range of pH 0 - 14, reliable and quick readings. How to calibrate pH pen - Press CAL key for 5 seconds to enter calibration mode, then press to select 6.86, 4.00, 9.18 corresponding powder to finish calibration, pH pen electrode is easily affected by the environment, if not used often, calibration before use will get accurate measurement results, regular use will keep the accuracy of measurement.
  • [Great for all home and laboratory] TDS & & EC and pH testing applications inc....
Check Stock

Greenwave Broadband EMI Dirty Electricity Meter

  • Measures the dirty electricity (a.k.a. electrical noise, line noise, power line EMI) present on the wiring in buildings..
  • Easy to use! Simply plug the meter into electrical outlets to get measurements..
  • Measures a broad range of dirty electricity frequencies (approximately 3 kHz -- 10 MHz)..
  • Makes it easy to compare EMI levels before and after installing dirty electricity filters..
  • Includes an audio feature that lets you listen to the dirty electricity on a circuit and hear it decrease as filters are installed..
Check Stock

WHDTS Digital Temperature Controller Switch Module 12V DC -50℃ to 110℃ Micro Digital Thermostat Board with 1M Waterproof Sensor Probe

  • HIGH AND STABLE QUALITY: The digital temperature controller is equipped ST core chip, high-precision temperature control sensor probe and 1.8mm ABS shell which has good toughness and low temperature resistance..
  • TEMPERATURE CONTROL MODE: Our electronic temperature control module can be choosen heating or cooling mode to meet your needs. The digital thermostat also has power off memory function..
  • TEMPERATURE RANGE: The temperature measure and control range is -50~110℃, the accuracy is 0.1℃..
  • WATERPROOF AND ELECTRICITY PROOF PROBE: Our 1 meter probe has Stainless steel shell, sealed with resin, waterproof and no rust and electrical isolation design. it’s very weak even if there leakages, very safe to use..
  • WIDE APPLICATIONS: The size is 2.2*1.5*1.2 inches. After setting the mini embedded thermostat, it can be appled to chassis cabinet, pet house temperature control, computer case, refrigerator freezer and more household appliances and Industrial equipment..
Check Stock