Top Digital Feeler Gauge

KEWAYO Stainless Steel Feeler Gauge Metric Measuring Tool (0.02-1.00mm, 17 Blades), for Measuring Gap Thickness

  • Easy identification: dual marked metric and imperial, 0.0007 inch/ 0.02 mm to 0.039 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.02, 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00.
  • Inch sizes: 0.0007, 0.001, 0.0016, 0.002, 0.0024, 0.0028, 0.0031, 0.0035, 0.0039, 0.006, 0.008, 0.009, 0.011, 0.015, 0.019, 0.029, 0.039.
  • Feeler gauge set: each measuring feeler gauge has 17 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Warm notice: There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about it..
Check Stock

4 Pieces Stainless Steel Feeler Gauges Dual Marked Metric Feeler Gauge SAE Offset Valve Thickness Gauge 32-Blade Feeler Gauge Measuring Spark Plug Tool for Measuring Width Thickness

  • Feeler fauge sets: package contains 4 pieces of 32-pieces feeler gauge (measurement: 0.0015-0.035 inch/ 0.04-0.88 mm), adequate size to meet your use and replacement needs.
  • Suitable for designers, engineers, mechanics to measure the thickness of tappet clearances, spark plugs gaps and other hard to reach places.
  • Quality material: made of 65 manganese steel, each spark plug gap measuring tool is resistant to wear and tear and has nice strength, exquisite and durable, features nice precision and hardness, elasticity and wear resistance, lightweight and small size, easy to carry and storage.
  • Easy to identify: dual marked metric and SAE, through the fine manufacturing process, the number of sizes in the feeler gauge and its specifications are clear at a glance and easy to identify.
  • Warm tip: stainless steel feeler gauge has some anti-rust oil to prevent rust, please do not worry.
  • Foldable design: fastened by screws, removable, the plates are bound inside a chromed plate protector to prevent loss of individual plates, designed with a thumb notch for easy selection and expansion, when you use it, you can move the plate out, and when not in use, you can fold it back to prevent corrosion, bending, deformation and damage, simple and convenient.
Check Stock

2 Pack Feeler Gauge with 32/26 Blades and 1 Pack Offset Feeler Gauge with 16 Blades - Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Gap Measuring Tool for Automotive Repair

  • Good Combination: The package includes 3pcs feeler gauges with different sizes, types and blades (32/26/16 Blades), this set includes the common sizes needed for jobs, you can choose the appropriate one that meets your needs.
  • Various Sizes: Metric and inch sizes etched on each blade. Feeler Gauge with 32 Blades (0.04 mm - 0.88 mm/0.0015 inch to 0.035 inch). Feeler Gauge with 26 Blades (0.04 mm - 0.63 mm/0.0015 inch to 0.025 inch). Offset Feeler Gauge with 16 Blades (0.127 mm - 0.508 mm/0.005 inch to 0.020 inch). Please refer to the pictures for size details.
  • User Friendly: Designed with the thumb notch, the chromed-blade protector and the lock nut, the feeler gauge set is foldable, convenient to take and store, and these blades are not easy to be lost and can be disassembled if you want to use one alone.
  • Multi-functional: Ideal for exactly measuring gap width or thickness. Suitable for designers, engineers and mechanics to measure the thickness of bearing clearances, spark plugs gaps, piston ring gaps and other places that are hard to reach.
  • Durable: Made of high quality 65 manganese steel, the feeler gauges are resistant to wear and have strong strength, and there is some oil on the feeler gauge set to prevent it from rusty.
Check Stock

32 Blades Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04, 0.05, 0.06, 0.08, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.43, 0.45, 0.48, 0.50, 0.53, 0.55, 0.58, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.88.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025, 0.026, 0.028, 0.030, 0.032, 0.035.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (0.038-1.02 mm,25 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 25 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015 inch/ 0.038 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.038, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483, 0.508, 0.533, 0.635, 0.686, 0.762, 1.
  • Inch sizes: 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020,0. 021, 0.025, 0.027, 0.030, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.005/0.127-0.02/0.508 mm, 16 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 16 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.005/ 0.127 -0.02/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification, Warm notice: Please check the product specification and size before purchase..
  • Metric sizes (mm): 0.127 mm, 0.152 mm, 0.178 mm, 0.203 mm, 0.229 mm, 0.254 mm, 0.279 mm, 0.305 mm, 0.330 mm, 0.356 mm, 0.381 mm, 0.406 mm, 0.432 mm, 0.457 mm, 0.483 mm, 0.508 mm.
  • Inch sizes: 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

Stainless Steel Feeler Gauge Measuring Tool Dual Marked Metric and Imperial Measuring (32 Blades,0.03-1 mm)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 32 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.001 inch/ 0.03 mm to 0.04 inch/ 1 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.13, 0.15, 0.18, 0.20, 0.23, 0.25, 0.28, 0.30, 0.33, 0.35, 0.38, 0.40, 0.45, 0.50, 0.55, 0.60, 0.63, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 1.00.
  • Inch sizes: 0.001, 0.0015, 0.002, 0.0025, 0.028, 0.003, 0.0035, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.01, 0.012, 0.013, 0.014, 0.015, 0.016, 0.018, 0.02, 0.022, 0.024, 0.025, 0.026, 0.028, 0.03, 0.032, 0.034, 0.034, 0.040.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don’t worry about that.
Check Stock

Stainless Steel Feeler Gauge Dual Marked Metric and Imperial Measuring Tool (0.0015/0.04-0.025/0.635 mm, 26 Blades)

  • Feeler gauge set: made of 65 manganese steel, each measuring feeler gauge has 26 blades thickness.
  • Foldable feeler gauges, easy and convenient to take and store.
  • Easy identification: dual marked metric and imperial, 0.0015/ 0.04 - 0.025/ 0.635 mm, the numbers of size are etched into feeler gauge for easy identification.
  • Metric sizes (mm): 0.04 mm, 0.05 mm, 0.06 mm, 0.08 mm, 0.10 mm, 0.13 mm, 0.15 mm, 0.18 mm, 0.20 mm, 0.23 mm, 0.25 mm, 0.28 mm, 0.30 mm, 0.330 mm, 0.35 mm, 0.38 mm, 0.40 mm, 0.43 mm, 0.48 mm, 0.45 mm, 0.50 mm, 0.53 mm, 0.55 mm, 0.58 mm, 0.60 mm, 0.63 mm.
  • Inch sizes: 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.022, 0.023, 0.024, 0.025 inches.
  • Warm notice: there is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
Check Stock

eSynic Digital Vernier Caliper IP54 Waterproof with 32 Feeler Gauge 150 mm/ 6 Inch Stainless Steel Electronic Caliper Fractions/Inch/Metric for Length Width Depth Inner Diameter Outer Diameter

  • 【Waterpoof LCD Digital Vernier Caliper】The eSynic Vernier Caliper is IP54 Waterpoof .Measurement Range: 0 - 6"and 0 - 150mm.
  • Large LCD Screen Makes You Read More Convenient and Clear. Zero in if It Needs Calibration at Any Position..
  • 【High Accuracy】Resolution: 0.0005"/1/128"/0.01mm.
  • Accuracy: 0.001"/0.02mm. Digital Caliper is More Precise with Measurements of Around Your Home or Job. Perfect for Professionals and Amateurs..
  • 【Foldable 32 Blade Feeler Gauge Set】 Measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, Feeler Gauge Make of 65 Manganese Steel, with Metric and Inch Unit. Solid Construction and Multiful Size for Various Uses..
  • 【Ease Of Use】Digital Calipers 6 inch Can Be Quickly Changed Between 3 Measuring Modes: Inch / metric / fraction, Ideal for Measuring Length, Width, Depth, Inner Diameter and Outer Diameter. It will Auto off after 5 Minutes of Inactivity..
  • 【Wonderful Set for Your Own or Your Love】With Stainless Steel Ruler body, Digital Vernier Caliper Built-in 1 Battery and Delivered Extra LR44 Battery, Come with Sturdy ....
Check Stock

Feeler Gauge MTQY 17 Blade 0.02mm to 1mm Thickness Gap Metric Filler Feeler Gauge Measure Tools

  • Specifications: Feeler gauges are indicated in metric. Thicknesses range from 0.02mm to 1mm..
  • Material: The feeler gauge is made of spring alloy steel, heat treated in its entirety, and coated with lubricating oil, which is not easy to wear to prevent pitting and corrosion..
  • Dimensions: Overall Length: 150mm/5.9inch.
  • Blade Dimensions: 150 x 13mm /5.9 x 0.5inch (L x W).
  • Easy identification: 17 blades have clear thickness on each blade for easy identification..
  • each measuring feeler gauge has 17 blades and can be folded for easy carrying and storage..
Check Stock

Rannb Metric Feeler Gauge Gap Measurement Tool 12-inch Long 17 Blades 0.02-1.00mm Thickness

  • ⭐【Material】The feeler gauge is constructed from manganese steel with a lube oil coating to prevent pitting and corrosion..
  • ⭐【Dimension】Total Size: 300mm x 15 x 6mm/12" x 0.6" x 0.24"(L x W x H).
  • ⭐【Specification】 Metric sizes (mm):0.02, 0.03, 0.04, 0.05,0.06, 0.07, 0.08, 0.09, 0.10,0.15, 0.20, 0.25, 0.30, 0.40, 0.50, 0.75, 1.00. The feeler gauge is marked in metric. Thickness ranges from 0.02mm to 1.00mm..
  • ⭐【Easy to Identify】 Every blade has its thickness clearly on it for easy identification..
  • ⭐【Package Content】1pcs x Feeler Gauge.
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【What You Get】: In this feeler gauge set, it include 32 blades dual marked metric and imperial gap measuring tool, 16 blades standard SAE and metric feeler gauge, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines ....
Check Stock