Top Digital Optical Switch

4K HDMI to Optical Audio Converter + HDMI PCM 5.1 7.1 to Analog Surround Decoder

  • Great digital to analog audio decoder solution for transcoding uncompressed digital LPCM 7.1 or 5.1 channel sound into analog surround format for existing analog amplifier or receiver. Extract compressed digital Bitstream audio such as Dolby Digital, AC3 and DTS 5.1/7.1 embedded in HDMI feed and output through its optical audio output for further decoding by downstream device. Supports uncompressed LPCM 7.1, LPCM 5.1 and PCM in analog output through the multi-channel 3.5 output ports..
  • Deliver 7.1 and 5.1 discrete channels through its front left/right, center/subwoofer, rear left/right and rear center left/right channel to deliver a directional and more realistic effect Supports compressed audio such as Dolby Digital, AC3, DTS 5.1 and PCM 2CH through optical audio output. Easy EDID dip switch selection so users can easily control their HDMI source to send the desired digital audio format for decoding or conversion..
  • No HDMI output with TV is required when receiving audio at the analog or optical audio output. Supports all HDTV resolutions including 4K, 2K, 1080p, 1080i, 720p, 576p and 480p. Output resolution follows input. Fully compliant with HDMI 1.3, HDCP 1.2 and DVI 1.1 standards..
  • Supports HDMI audio sampling rates up to 192 kHz. Supports optical (....
Check Stock

Optical-to-Coaxial OR Coaxial-to-Optical Digital Audio Converter ROOFULL Bi-Directional Digital Coaxial to/from Optical Toslink SPDIF Audio Converter/Adapter/Repeater

  • 【Bi-Directional Digital Audio Converter】This 2-way audio adapter allows you to convert Optical to/from Digitial Coaxial, an input selection switch can easily select either SPDIF (Optical/Toslink) or Coaxial input.
  • 【Audio Format】 Support multi-channel surround sound, uncompressed LPCM/PCM audio and compressed 5.1 audio including Dolby Digital (AC3), DTS to audio processor or A/V receiver with capacity of decoding audio source. The highest support 192 KHZ sampling rate. Noise-free transmission.
  • 【Easy to Setup】 Plug and play, no need any software and driver. Come with 5V1A power adapter (support 100V-240V input), no need to prepare by yourself.
  • 【Long Distance】Use Optical fiber cable loss less the 0.2Db/m, output distance is up to 30 meters (98 feet).
  • Use the standard Digital Coaxial cable output can be up to 10 meter (32 feet).
  • 【Wide Compatibility】Compatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port. (If you also need optical and digital coaxial cable, please search "B07D7TDXF6" on Amazon).
Check Stock

Avantree DAC02 192KHz Digital to Analog Audio Converter with Toslink Optical Cable, Volume Control, SPDIF Coaxial to Stereo L/R RCA 3.5mm AUX Adapter for PS4 PS3 Xbox HD DVD Home Cinema AV Amps TV

  • 【DIGITAL TO ANALOG AUDIO CONVERTER】Converts Optical / Coaxial Toslink digital Pulse Code Modification (PCM) and Line Pulse Code Modification (LPVM) audio signals to Analog (RCA and AUX 3.5mm Jack) audio simultaneously..
  • 【WIDE COMPATIBILITY】Now easily bridge your legacy sound system with a whole array of digital sources. The DAC02 works perfectly with HDTVs, Satellite receivers, Blu-ray/HD DVD players, Home Theatre systems, AV amplifiers, Sky HD plasma, TVs – pretty muchall devices with optical or coaxial digital audio output port. What’s more, you can also use it for your gaming devices such as PS3, PS4 and Xbox..
  • 【VOLUME CONTROL DESIGN】This device comes with its own professional volume control knob, which makes it super easy to adjust the output volume of both RCA and AUX. This supports the simultaneous play of both the speakers and headphones. NOTE: This is a Digital to Analog converter only and cannot be used as an audio amplifier..
  • 【SUPPORTS ALL POPULAR SAMPLE RATES】DAC02 accepts uncompressed digital audio as input with 192kHz/ 24bit, 96kHz, 48kHz, 44.1kHz, 32kHz as sample rates and provides electromagnetic-noise-free transmission. It supports uncompressed 2-channel LPCM or PCM Digital audio signal output..
Check Stock

(Newest Version) SkycropHD 4K@60Hz HDMI Switch Audio Extractor with Optical + 3.5mm AUX Output, 5 in 1 Out HDMI Switcher Converter Support ARC, HDCP 2.2, HDR10, Dolby Visio, Dolby Atmos

  • 【5 In 1 Out HDMI Switch】Connect up to 5 HDMI source devices, such as Cable Box, Blu-ray Player, Fire TV, Apple TV, Roku, Xbox One X, PS4 Pro… to a single HDTV, monitor, or projector.
  • auto and manual switch allow you to seamlessly switch between games, movies, and TV shows.
  • 【Extract Optical & 3.5mm Audio】The HDMI audio extractor can extract 5.1CH Dolby Digital/DTS and 2CH LPCM/PCM audio from HDMI sources, output it via optical SPDIF coaxial and 3.5mm port to external soundbar/receiver/speakers.
  • 【EDID Audio Settings & ARC】Choose 5.1CH to get digital surround from optical port, 2CH to get analog stereo from 3.5mm jack.
  • ARC (Audio Return Channel) function allows TV to send audio to non-ARC sound system (NOTE: TV needs ARC capable, 3.5mm AUX do not support ARC audio).
  • 【True 4K Ultra HD】This HDMI 2.0 Switcher supports [email protected], [email protected], also back compatible with [email protected]/50/30Hz, we suggest using certified 18Gbps HDMI cables to get HDR10, Dolby Vision, Dolby Atoms application.
  • 【Packing and Warranty】Package includes: HDMI Switch Audio Extractor x 1, IR remote x 1, Power Adaptor x 1, User Manual x 1.
  • professional technical support with 1 year hassle-free warranty.
Check Stock

EMK Fiber Optical Splitter Switch - 3 Way in/Out Digital Toslink Optical Audio Splitter Manual Switch with Fiber Optic Cable (Optical Switch 1x3)

  • 1 to 3 Optical Splitter adapter can spits into 3 female Toslink, Compatible with Male Toslink cables..
  • 2 ways you can choose,connect one signal digital audio sources input to three digital audio output or three toslink optical audio input signals switch to one toslink optical output. Switching with ease by just hold down the black button and turning the selector dial(Note:only one can be selected at a time.).
  • Connect 3 digital input devices together by Toslink connection to one input on the destination audio player, speaker, amplifier, receiver, HDTV or home theater system, output connects directly into TV Of home theater receiver..
  • Compatible with HDTV, Blu-ray DVD player, Dolby Digital, PCM, DTS, XBOX360, PS3 to home theater, expands the capacity of a home theater’s A/V Inputs..
  • Over-voltage protection can prevebt the damage caused by connecting unmatched power adapter to the machine..
Check Stock

Tendak Digital Optical Audio Splitter SPDIF/Toslink 1 in to 3 Out Powered Amplifier Supports 5.1CH/ LPCM2.0/ DTS/Dolby-AC3

  • 1 In 3 Out Optical Audio Splitter: Split 1 Audio Source to 3 Amplifier or Speaker at the same time.
  • Audio Format: Supports Dolby Digital & DTS 5.1, Dolby Digital Plus.
  • Support PCM Stereo 32kHz, 44.1kHz, 48kHz and 96kHz.
  • Over-Voltage Protection: Optical switcher prevents the damage caused by connecting the unmatched power adapter to the machine. Integrated circuit....
  • No Signal Loss: Optical switch use optical fiber cable loss less the 0.2Db/m, Output distance is up to 131ft (40m). Support signal retiming.
  • Widely Compatible: Perfect for use with Apple TV, Cable boxes, Roku, Xbox, PlayStation, Blu-ray players, Amplifier, Speaker and other devices. Note:....
Check Stock

6 Pieces ADS1115 Analog-to-Digital Converter 16 Bit ADC 4 Channel Module Converter with Programmable Gain Amplifier ADC Converter Development Compatible with Arduino Raspberry Pi

  • / – Bi-directional universal audio converter and Dolby Digital decoder supports both analog to digital audio signal conversion (ADC) and digital to analog audio signal conversion (DAC)..
  • – Fully licensed Dolby decoder automatically downmixes a multichannel digital audio signal for compatibility with any stereo playback system, analog or digital..
  • – Simultaneously converts an analog L/R stereo, digital optical SPDIF TosLink or digital coaxial audio input into three audio outputs with electronic noise free transmission..
  • use the input select switch to choose between optical, coaxial or L/R inputs. LPCM input sampling rates 32 to 96 kHz, output 48kHz.
  • – All J-Tech Digital products include a One-Year Manufacturer Replacement Warranty and free lifetime technical support from our customer support team located in Sugar Land, TX. Support is available from 9AM – 6PM CST, Monday through Friday. Contact information available on our seller page..
Check Stock

FiiO D3 (D03K) Essential Edition Digital to Analog Audio Converter - 192kHz/24bit Optical and Coaxial DAC - Without AC Adaptor

  • Converts a digital coaxial/optical S/PDIF signal to two-channel analog stereo output over RCA or 3.5mm stereo jack.
  • Ideal for interfacing between modern devices with digital audio output such as TVs and game consoles with analog amplifiers, self-powered speakers, or wireless headphones.
  • Ultra low jitter design digital receiver chip and low noise DAC supports all popular sample rates including 32kHz, 44.1kHz, 48kHz, 96kHz and 192kHz, at up to 24-bit resolution.
  • Switch selectable coaxial or optical input for exceptional flexibility.
Check Stock

Digital to Analog Audio Decoder by OREI, Convert Decode Dolby Digital Audio SPDIF/Coaxial 5.1-Channel Input to RCA L/R/3.5mm Headphone Output Converter - DA34

  • Decodes DTS/Dolby Digital source digital audio to analog 2.0CH stereo audio output (RCA L/R and 3.5mm Headphone), Supports Digital Audio Input: SPDIF (Optical), Coaxial - Make sure switch to the correct input on the side.
  • Supports simultaneous RCA L/R and 3.5mm Headphone outputs.
  • Make sure the the plastic removed. And the Optical Cable is pushed in completely..
  • TROUBLESHOOT: Signal from the TV goes into SPDIF (Optical), or Coxial input of the DA34 and The output of RCA or Headphones will go into your analog speakers or headphones. Make sure the power adapter is connect properly. And all the cables are inserted all the way in. If there is still no sound, please change the TV Audio out to PCM Only from the TV Menu..
Check Stock

Gigaware Universal Gaming Component Cable With Switch 26-1542

  • Connect your PlayStation 3, PlayStation 2, Xbox 360, and Wii systems with included component cables.
  • Easily switch between each of your gaming consoles.
  • Reduce the tangled mess of cords behind your entertainment system.
  • Enjoy crystal clear digital sound with the digitial optical jack (Xbox only) (Optical cable sold separately).
Check Stock

HDMI Switch with Audio Extractor 4K Optical 3.5mm Audio Adapter 3 Port 4K HDMI Switcher 3 in 1 Out HDMI Audio Splitter Converter IR Remote Control Support HDCP 1080P 3D EDID Dolby DTS 5.1

  • 【HDMI Switch with Audio Extractor】 It's a HDMI 3x1 Switch With Audio Extractor. Using The Settings Switch You Can Configure Your Audio/Video System to Work in Three Modes: Built-in LPCM 2.0 EDID, Built-in Digital 5.1 EDID and EDID from TV..
  • 【The HDMI to Optical Audio Adapter Has High Resolution】The HDMI Switch Input Resolution: Up to [email protected](4:2:0),Supports Video EDID Pass Through, Audio EDID Settings: 2CH and 5.1CH.The HDMI Switcher Don't Support HDCP 2.2,ARC,CEC..
  • 【HDMI Switch Splitter Support 3 Work Modes】5.1 Node: Only Optical Output, Support 5.1 Format Audio. 2.0 Mode: Both Optical Fiber and L/R Can Work, But Only Stereo in PCM Format is Supported. Pass Mode: Output Audio Format According to The EDID of The Display Device. Support Automatic, Manual or IR Remote Switching..
  • 【HDMI Switch 4k Has Automatic EDID Algorithm】Lossless Transmission of Audio and Video Signals, Ensuring Clarity of Images and High Fidelity Sound. Built-in Signal Equalisation Amplification, Input Supports 30Ft, Output Supports 30Ft..
  • 【Wide Compatible】The HDMI Switch With Audio Extractor Suitable for Various HDMI Source Devices Like Roku or Chromecast Without Dedicated Audio Output As Well As Blu-ray/ DVD/ HD Player, Cable/Satellite Box,PS4/5, Xbox, P....
Check Stock

J-Tech Digital Premium Quality SPDIF TOSLINK Digital Optical Audio 4x2 Matrix (Four Inputs Two Outputs)

  • 4 Inputs / 2 Outputs for Optical / SPDIF / TOSLink Audio.
  • A True Matrix for Any Input to Any Output: The two outputs share the same input or be from two different inputs..
  • Supports Dolby Digital & DTS 5.1, Dolby Digital Plus.
  • Support PCM Stereo 32kHz, 44.1kHz, 48kHz and 96kHz.
  • Input can be selected through remote control or button on the switch.
  • Input and output can be selected through remote control or button on the switch.
  • Free lifetime technical support from the manufacture and free 1 Year Manufacturer Warranty from J-Tech Digital..
Check Stock