Top Digital Oscilloscope Rigol

OWON SDS1104 100MHz 4 Channels Digital Desktop Oscilloscope 1GS/s Sample Rate Portable Oscillometer

  • 【Professional Storage Oscilloscope】- Super-economical digital storage oscilloscope.Cost-effectiveness,100MHz bandwidth,4 channels input,max input voltage 400 Vpp,1GS/s sample rate,8-bit high resolution,SCPI and LabVIEW (USBTMC) supported.Communicate with computer through the supplied USB cable.Front USB port,support U disk storage..
  • 【7" LCD Screen & Simple Operation】- This oscilloscope with 7" large color LCD screen, 800 x 480 pixels display, clear and realistic waveform display。Easy-accessible operation menu gets you to the result conveniently。ultra-thin body and handle design, lightweight and portable, cooling holes on the back can ensure fast cooling during prolonged use..
  • "Multi-Function :Waveform storage function,16 sets of waveforms can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed. One-Click show all measurements,built-in 39 types of auto measurement,convenient to view the waveform information. FFT spectrum analysis function, supports for Hamming, Blackman, Rectangular, Kaiser, Bartlett.".
  • 【Widely Used Oscilloscope】- With multiple trigger functions and more than 30 kinds of automatic measurement functions,Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vavg, Vrms, Cycle RM....
Check Stock

RIGOL DG1022Z Function/Arbitrary Waveform Generator,25MHz 2 Channels

  • 500MHZ Digital Oscilloscope with 4 Channles, 10GSa/Sec Sampling.
  • 100M record length (upgradeable to 500M via optional software).
  • High waveform capture rate (600,000 waveforms per second).
Check Stock

OWON HDS242 Oscilloscope 2 in 1 Universal Test Instrument, Professional LCD Display Screen Mini Handheld Digital PC Oscilloscope,20000 Counts Digital Multimeter, with Lithium Battery(40 MHz + 2CH)

  • ✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry..
  • ✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast color LCD display,suitable for outdoor use..
  • ✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be fully charged when delivered. To make the battery fully charged, it takes up to 4.5 hours (when the device is turned off) or it is subject to the charging indicator. After charging, the battery can supply power for about 6 hours..
  • ✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto measurement,cursor measurement function and save function..
  • ✨[USB Type-C Interface]: Type-C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.OWON Oscilloscope can be charged by an adapter or a power bank, and supports PC software connecti....
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Assembled Finished Machine EM001

  • ASSEMBLED FINISHED: ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine No soldering/assembly work needs It can be....
  • UPGRADED VERSION: The sensitivity of the EM001 has been extended both in width and height which is wider and higher than the others It reaches 5mV/div....
  • HAND-HELD: This updated digital oscilloscope can be hand-held while the others can only be used by placing it on the desktop.
  • ROTARY ENCODER: It has been added the rotary encoder makes parameter adjustment more quicker and easier.
  • WHAT YOU GET: You will get a assembled oscilloscope and BNC-clip cable Detailed Operation instructions troubleshooting guide and schematic are also....
Check Stock

OWON HDS272 Oscilloscope 2 in 1 Universal Test Instrument Professional LCD Display Screen Mini Handheld Digital PC Oscilloscope,20000 Counts Digital Multimeter with Lithium Battery 70 MHz + 2CH

  • ✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High....
  • ✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast....
  • ✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be....
  • ✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto....
  • ✨[USB Type-C Interface]: Type-C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby....
Check Stock

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe Power Adapter Assembled Finished Machine Q15001 White

  • ASSEMBLED FINISHED - ETEPOPN Q15001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can....
  • UPGRADED VERSION - The sensitivity of the Q15001 has been extended both in width and height, which is wider and higher than the others. It reaches....
  • HAND-HELD - This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET - You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and....
Check Stock

Hantek 2D72 2CH Handheld Oscilloscope Scopemeter with Waveform Generator, 70MHz 250MSa/s

  • Professional Handheld Oscilloscope -- 120 MHz analog bandwidth,with an equivalent sampling rate of 500MSps. 3 trigger mode: Auto/Normal/Single. 4-position square wave signal output: 1kHz, 10kHz, 100kHz, 1MHz..
  • Safety & Convenient Digital Oscilloscope -- The built-in high voltage protection module can withstand up to 400V continuous voltage and 800V peak voltage. Don't worry about the oscilloscope burnout caused by the high voltage not being probed to the 10X position..
  • Proster Oscilloscope with HD 2.4" Color Screen: Display high-definition LCD screen with 2.4-inch 320×240 resolution. Extremely convenient and fast waveform storage function, can store up to 2500 waveform pictures. Powerful waveform file manager, support for thumbnail browsing, viewing, detail viewing, page turning, deletion and more..
  • Portable Oscilloscope -- Backlight brightness：1～8 levels. Built-in lithium battery, about 8 hours standby time when fully charged. Protective silicone covers on both sides of the instrument, slip-resistant, drop-resistant and shock-resistant, comfortable hand feel..
  • Professional Oscilloscope -- Accessories: 100MHz probe, charging cable, user manual，cloth bag. Suitable for home appliance inspection, automotive diagnostics, research and education, produc....
Check Stock

Goupchn Oscilloscope Probes Kit with Accessories 200Mhz Test Leads Set BNC to Mini Grabber Cable 4mm Banana Plug to Test Hook Clip Leads

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x 200mhz oscilloscope probes with with Accessories kit, 1 x bnc to minigrabber test lead, 2 x 4mm banana plug to test hook leads, 1 x white transparent storage box..
Check Stock

ETEPON Digital Oscilloscope Kit with BNC-Clip Cable Probe (Assembled Finished Machine) EM001

  • ASSEMBLED FINISHED – ETEPOPN EM001 digital DIY oscilloscope kit with case is an assembled finished machine. No soldering/assembly work needs. It can be used directly to avoid assembling/welding process problems and greatly save your time..
  • UPGRADED VERSION – The sensitivity of the EM001 has been extended both in width and height, which is wider and higher than the others. It reaches 5mV/div – 20V/div, while the others is only 10mV/div – 5v/div..
  • HAND-HELD – This updated digital oscilloscope can be hand-held, while the others can only be used by placing it on the desktop..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment more quicker and easier..
  • WHAT YOU GET – You will get a assembled oscilloscope, BNC-clip cable and a power adapter. Detailed Operation instructions, troubleshooting guide and schematic are also provided..
Check Stock

DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Pocket-Size Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Electronic Learning Set, Assembled Vision (Welded)

  • This DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • This oscilloscope board uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source..
  • 2.4″ Oscilloscope with automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay)..
  • 2.4 inch TFT handheld pocket-size digital oscilloscope with waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • Partially open-sourced,the MCU has been programmed, adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

Skeleton Crew

  • VSWR Bridge with VSWR-DSA800, VSWR-DSA1000 licenses included Frequency range: 1 MHz - 3.2 GHz, Typical Directivity: 30 dB.
  • For DSA815-TG, DSA815, DSA832E-TG, DSA832E, DSA832-TG and DSA832.
  • Used together with Rigol DSA series spectrum analyzers with tracking generators to make S11 measurements.
  • The VSWR bridge connects directly onto the front of Rigol DSA series spectrum analyzers with tracking generators to improve the test accuracy and to avoid the need for cables.
Check Stock