Top Digital Servo Controller

JX CLS6336HV 35kg Aluminium Shell Metal Gear High Voltage Coreless Digital Servo for RC Models Helicopter Accs

  • JX ecoboost Servo CLS6322HV high voltage coreless digital servo..
  • High-performance digital standard servo, high-precision and high-precision metal steering gear..
  • Double ball bearings, high torque of 21 kg-cm..
Check Stock

BETU 2Set 25KG (7.4V/2S) High Torque RC Digital Servo，Waterproof Full Metal Gear Servo with 25T Servo Horn（180°）

  • 【Super Large Torque 25kg Servo】Super Large Torque， Maximum torque is up to 25 kg/cm (280.5 oz/in)@7.4V(2s). Very strong, excellent range of motion, and includes a 25T metal horn..
  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arms.
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】1.57 x 0.78 x 1.59 inch(40 x 20 x 40.5 mm).
Check Stock

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

  • [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
  • [Interface type] This SG90 servo is compatible with JR & Futaba interface.
  • [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
  • [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock

UCTRONICS 20KG Digital Servo Motor with Bracket Kit, High Torque Arduino Servo for Robotic Joints, DIY RC Car, Building an x-y Raster Scanner

  • Digital Servo: RDS3218 digital servos specially designed for robots. Faster speeds, higher torque and better holding capability than analog servos..
  • Biaxial Servo: Easier assembly than the uniaxial servo kit, dual ball bearings work better than plastic bearing and metal bearing, highly recommend if your application demands heavy side loads..
  • Extensible Servo: Controllable angle range from 0 to 270 degrees, move wider than the standard 180 degrees.
  • the U-shaped brackets have many different predrilled hole patterns made for lining up with the various bases and mounts..
  • Wide Applications: For robotic joints, DIY RC Car, building an x-y raster scanner, and other Arduino or Raspberry pi robotic projects..
Check Stock

BETU 35KG Coreless High Torque Servo，Waterproof Servo Compatible with 1/6，1/8, 1/10, 1/12 Truck, RC Car, Metal Gear Servo with 25T Servo Horn（180°）

  • 【Excellent Quality steering servo】Equipped with strong copper & aluminum gears,CNC aluminium middle Shell, Less Noise, light weight, Stable and water-proof,Equipped with 1 Pcs 25T Metal Servo Arm..
  • 【Widely Use Digital Servo】The servo (Control Angle 180°) Compatible with 1/6，1/8, 1/10, 1/12 Scale Clawer Truck, Traxxas, scx10, RC Car / Robot / Boat and other remote control models..
  • 【High Torque Waterproof Servo】Waterproof performance: IP66. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control..
  • 【Metal Servo Servo Standard Size】40 x 20 x 38.5 mm ( 1.58 x 0.79 x 1.50 in).
Check Stock

REEFS RC 422HDv2 Servo Winch with Built in Controller, SEHREEFS43

  • Reef's RC REEFS43 - 422HDv2 Servo Winch & Built In Controller.
  • Features: "Submarine Waterproof" 7075 Aluminum CNC-Machined Spool w/Clear Finish 7' Silicone Coated Steel Braided Line, w/Scale Recovery Hook Internal Steel Gears All CNC Aluminum Casing Anodized Color: REEFS GRAY.
  • Includes: (1) Servo Winch with Built in Controller.
  • Specs: Bearing Type: 2BB Operating Voltage: 4.8V-8.4V Weight: 2.84oz Dimension: 1.57" x .79" x 1.5" (LxWxH) Torque: 405oz @ 6.0v / 450oz @ 7.4v / 480oz @ 8.4v Speed: .11sec @ 6.0v / .10sec @ 7.4v / .09sec @ 8.4v Spline: 25T.
  • Part number(s) included (in factory packaging): REEFS43.
Check Stock

ACEIRMC SG90 Servo Motor Micro Servo 9G Servo Motor for RC Robot Arm Helicopter Airplane Remote Control (5 Pcs) (5pcs)

  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on compatible for Arduino ,Raspberry Pi.
  • The SG90 mini servo motor is lightweight, high-quality and lightning-fast.The servo is designed to work with almost all the radio control systems..
  • SG90 Micro Servo Motor compatible for Mini Arduino Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control with Cable.
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Check Stock

VATOS Spirit Brushless 52km/h High Speed RC Cars 1:16 Remote Control Monster Truck 4WD All Terrain Off-Road 2.4Ghz Shockproof Waterproof RTR Hobby Cars for Intermediate Hobbyist (1：16)

  • ...TRUCTURE】: Anti-corrosion, high strength, anti-impact PA material chassis and Reinforced Body Frame make the RC car not east to break. Aluminum alloy damping springs, widened suspension system and vacuum rubber tires, all-terrain adaptation, whether on rugged slopes or rough mountain roads are as usual.
  • 【UPGRADE DIGITAL SERVE】: 3-wire digital Servo, 1.8kg pull force, 300 pulses per second, compared with analog servo, digital servo provides higher accuracy and better fixed power, faster response, Softer and faster acceleration and deceleration. Digital servo provides higher precision and better fixed power and anti-shake function.
  • 【MORE PARAMETERS】: 2 speed mode, 4 wheel drive,2.4Ghz, 80-90m control distance, 7.2V, 60-70 mins charging time,15 mins max speed running time, 6 months free return guarantee.
Check Stock

2.4KG Micro Digital Servo Kit - High Torque 9g Metal Servo Waterproof Mini Steering Gear Standard Fast Speed Continuous Rotation for SCX24 RC Model & EMAX ES08MD II Standard 180 Degree

  • 2 Pack servo set : The EMAX ES08MD II digital servo's torque: 1.6kg/cm(4.8V ), 2.0kg/cm(6V), positioning speed(at no load): 0.12s / 60 degrees(4.8V), 0.1s/60 degrees(6.0V), maximum rotating angle: 180°.It can instantly generate high torque to make your RC car overtake in curve.
  • Wide application: Equipped with JR & Futaba universal plug, the 3 wire metal servo can be well adapted to Axial SCX24 SCX10 RC cars helicopters KT, fluttering, gliding, small robots, arduino experiments and other models.
  • Strong full metal gear: Waterproof servo motor is made of sturdy PVB plastic shell, strong steel metal gear and hard iron shaft.This powerful steering gear has passed the CE international safety test，which can withstand more than 1,000 impacts and increase your model's service life.
  • Stable performance: Compared with other steering gears, our upgraded high torque servo are equipped with high precision potentiometers and high-resolution digital chip, which can make your RC car respond quickly, enhance anti-interference ability, and quickly dissipate heat.
Check Stock

BETU 35kg Waterpoof Servo, Full Aluminum Case and Stainless Steel Gear Servo, High Torque Servo Compatible with 1/6，1/8, 1/10, 1/12 RC Car/Robot/Boat

  • High Torque Servo：This 35kg Waterpoof Servo's maximum torque is up to 35 kg/cm@7V, high torque, Compatible with1/8, 1/10, 1/12 Truck, RC Car / Robot / Boat..
  • Waterpoof Servo: Waterproof performance IP67. Controllable angle range from 0 to 270 degrees, Excellent linearity, precision control..
  • All metal servo: Equipped with full aluminum case and stainless steel Gear, CNC aluminium middle shell, less noise, light weight, higher operating accuracy..
  • Product Dimension: 1.57 x 0.78 x 1.57 inch(40 x 20 x 40 mm).
  • With one 25T adjustable metal servo arm, one 25T round type servo horn and one set of accessories..
  • Great digital Servo for people who are interested in developing software for robot parts, Such as mechanical arm, Quadcopter Drone and other remote control equipment..
Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

  • BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
  • EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
  • UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
  • MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
  • WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..
Check Stock

T best Digital Servo 1500μs/ 330hz 360 Continuous Rotation SPT5525LV-360 25KG Standard Digital Servo for RC Car Robot

  • ◆ DURABLE TO USE: Made of high quality metal material, this Digital Servo is quite durable in use..
  • ◆ MUCH ADVANCE: Digital Servo owns professional manufacturing, stable performance, high sensitivity, high reliability..
  • ◆ EASY TO USE: Simple to install and remove, RC Car Servo is convenient to use, and well suitable for robots..
  • ◆ IDEAL ITEM: Also can be a great replacement for the old or damaged one, making it more fashional and cool..
  • ◆ GUARANTEE: If you are not satisfied with our product received, you can apply for unconditional return and refund within 180 days. In terms of any....
Check Stock