Top Dimensional Accuracy

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

SUNLU PLA 3D Printer Filament, PLA Filament 1.75 mm Dimensional Accuracy +/- 0.02 mm, 1 KG Spool, PLA White+Grey

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Marble PLA Filament 1.75mm 3D Printing Filament 1KG 2.2LBS 3D Printer Material Sparkly Stone Rock PLA CC3D

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

PLA 3D Printer Filament, SUNLU PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1kg Spool, 1.75mm, PLA Black+White

  • 【Toughness Enhanced PLA Filaments】---SUNLU premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • 【Dimensional Accuracy & Consistency】These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

SUNLU PETG 3D Printer Filament PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm 1 KG Spool PETG White

  • 【Toughness Enhanced PETG Filaments】 ---SUNLU premium PETG filaments have the advantages of incredible ease of printing Optimized printing quality,....
  • 【Dimensional Accuracy & Consistency】---These tough PETG filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm....
  • 【Clog-Free, Bubble-Free & Easy-to-use】---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. without....
  • 【Wide Compatibility】---Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of....
  • 【Risk-Free】---One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter:....
Check Stock

PETG Filament Enotepad PETG Filament 1.75mm for 3D Printer 1KG Spool 2.2lbs Dimensional Accuracy + / - 0.02 mm PETG Black

  • [About Enotepad PETG Filament] PETG Filament produce in strictly procedures, strong adhesion, no bubbles, ultra smooth technology, low odor, provide....
  • [Dimensional Accuracy and Consistency] 3D PETG filament 1.75mm with strict tolerance, dimensional accuracy + / - 0.02 mm. Advanced CCD diameter....
  • [Compatible with 99% FDM 3D Printer & 3D pen] Enotepad PETG Filament fits for most FDM 3d printers and 1.75mm 3d pen on the market. The wide....
  • [100% Vacuum-sealed Packaging] Use vacuum-sealed packaging bag for packaging PETG filament to keep the humidity percentage at a minimum and....
  • [What You Get] PETG Filament 1 KG, Friendly Customer Service, and 12 Months Warranty. If you have any questions about our 3D PETG Filament, you can....
Check Stock

SUNLU Silk PLA Filament 1.75mm, Shiny PLA 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, 1kg Spool(2.2lbs), Silky 1.75 PLA Green

  • 【Shiny Silk PLA】 Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. SUNLU high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!.
  • 【Dimensional Accuracy & Consistency】These tough SILK PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • 【Clog-Free, Bubble-Free & Easy-to-use】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended PLA Filament Extrusion/Nozzle Temperature 210-220℃, bed 60-70℃ ..
  • 【Wide Compatibility】 --- Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm..
  • 【Risk-Free】 --- One-month free trial, 30 day Money-back if you’re not satisfied. Spool Diameter: 8" - Spool Width: 2.5" - Spool Hub Hole Diameter: 2.20".
Check Stock

PLA 3D Printer Filament, Apcvo Polylactic Acid 1.75mm 3D Printer Filament Bundle 1KG Spool (2.2 LBS) 3D Printing Materials, Dimensional Accuracy +/- 0.03 mm (Gray)

  • 【PLA fiber with enhanced toughness】High-quality PLA fiber has the incredible advantage of being easy to print. Optimized printing quality, high purity, low shrinkage and excellent interlayer adhesion can meet your needs for printing projects with high toughness functional parts..
  • 【Dimensional accuracy & consistency】Advanced CCD diameter measurement and adaptive control system in manufacturing can ensure strict tolerances. The diameter is 1.75 mm, the dimensional accuracy is +/- 0.03 mm, 1 kg spool (2.2lbs), the length is about 336 meters..
  • 【No clogging, no bubbles】It has been completely dried for 24 hours before packaging, and vacuum sealed with a desiccant in a nylon repacking bag, which can make the printing more smooth and stable. Since the carbon fiber filament is easily damp, please store it in a resealable aluminum foil bag after opening it to maintain excellent printing performance..
Check Stock

SainSmart PLA 3D Printer Filament,Toughness Enhanced PLA,Dimensional Accuracy +/- 0.03 mm, 1 KG Spool, 1.75 mm, White

  • Recommended Extrusion/Nozzle Temperature: 200 - 240 °C.
  • Recommended Bed Temperature: 60 - 80 °C.
  • High Strength PLA+ Filament has excellent machinal properties when compared with general PLA filament, its impact resistance is 4 times the standard one, tensile strength 1.5 times and elongation at break even 10 times. In combination with its resistance to temperature up to 68 °C (154°F), this PLA+ filament is a great fit for functional use..
  • Quality raw materials that eliminate impurities and bubbles, enabling smooth and effective filament feeding without jamming and warping..
  • With filaments well-wound onto the spool and a +/- 0.03 mm dimensional accuracy, what you got is a tangle-free filament that delivers smooth and consistent performance..
  • This PLA filament is an odorless and environmentally-friendly, plus with its ease of printing, making it your all-around, everyday budget filament..
Check Stock

uxcell 3D Pen Filament Refills,32.5Ft,1.75mm PLA 3D Printer Refills,Dimensional Accuracy +/- 0.02mm,Transparent

  • Toughness Enhanced PLA Filament-PLA filaments have the advantages of ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness..
  • Dimensional Accuracy & Consistency-These tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy + / – 0.02 mm without any exaggeration.
  • Clog-Free, Bubble-Free & Easy-to-use- Complete drying for 24 hours before packaging. Recommended PLA Filament Extrusion/Nozzle Temperature 374°F-446°F / 190°C-230°C.
  • Wide Compatibility-1.75mm Diameter, Universal Compatible with Diverse FDM 3D Printers in Market,Melt well and Feed Smoothly, Silk-Like-Feel – Silky Shinny Surface with Silk Luster, Giving Smooth, Pearly and Unique Touch.
  • LOW TEMPERATURE-the melting temperature of PLA filament is only 75 C, far lower than other materials. Low temp technology of this 3D pen filament remove the risk of burning hands..
Check Stock

SUNLU Wood PLA 3D Printer Filament, 1.75 PLA Filament Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, 1.75mm Wood fibers (Real Wood)

  • ...OD Fibers】SUNLU Upgrade Spool Wood PLA Filament is mixture of 20% recycle wood with polymer,Gives prints surface of wood color and texture. The print even smells like wood.SUNLU 1kg Wood filament combines real wood fibers, To satisfy your demands for printing projects of functional parts with wooden texture.
  • ②【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing guarantee these Wood PLA filaments of 1.75 mm diameter, dimensional accuracy + / - 0.02 mm without any exaggeration.
  • ③【Clog-Free, Bubble-Free & Easy-to-use】SUNLU WOOD PLA 3D Printer Filament is completely mechanically wound, with sturdy fixing holes, 100% tangled free, and manual inspection one by one. Which has an advantage of high purity with low shrinkage. It enables you to have a smooth and stable printing process, with excellent quality prints..
  • ④【Wide Compatibility】Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag.
  • Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.
Check Stock