Top Din 1 2344 Steels

Metra 95-5817 Double DIN Installation Dash Kit for Select 1995-2008 Ford, Lincoln, Mercury, and Mazda Vehicles & SCOSCHE DT1 DIN Automotive Car Radio Removal Pry Tool Kit

  • Product 1: Designed specifically for the installation of double-din radios or two single-DIN radios.
  • Product 1: High-grade ABS plastic contoured & textured to complement factory dash.
  • Product 1: All necessary hardware to install an aftermarket radio.
  • Product 1: Install dash kit for Dual ISO din or Double DIN/ISO Radios.
  • Product 2: REMOVE YOUR VEHICLE FACTORY STEREO: The Scosche DIN tool kit allows you to quickly remove your automotive car stereo easy. Just insert the tool (one on each side) and carefully pull out your radio from the panel for a quick extraction..
  • Product 2: COMPATIBLE FACTORY RADIOS: Compatible with most of the following factory radios from Ford, Lincoln, Mercury, Audi, Mazda, Mercedes, Porsche, Saab, Sterling, and Volkswagen vehicles..
  • Product 2: DIN RADIO REMOVAL KEYS: 1 pair of standard din factory removal key tools included..
  • Product 2: BUY WITH CONFIDENCE: Backed by Scosche’s Lifetime Tech Support and Limited Lifetime Warranty.
Check Stock

JET Bi-Metal Bandsaw Blade, 3/4\ x .035\ x 93\ x 6-10VT (414304)

  • REPLACEMENT BLADE FOR JET 7" x 12" HORIZONTAL BANDSAWS.
  • COMPATIBILITY: Fits HVBS-7MW, J-3410, HVBS-710G/S, and HBS-812G..
  • VERSATILE CUTTING: Bi-Metal bandsaw blades are great for metal cutting (i.e., carbon steels, light alloy steels, mold steels, and tool steels)..
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip Honing Steel Built For Daily Use Perfect for Chefs and Home Cooks! 10 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 10 Luxury

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 12 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

MIDI Splitter Cable, MIDI 5 Pin DIN Plug Male to 2 DIN Female SmartPhone AUX Headphone Stereo Jack Adapter Y Input Cable for MIDI keyboard, electric piano, synthesizer, MIDI guitar

  • DIN Male Split to 2 Female - 1 x MIDI DIN 5 Pin Male audio singal to Dual 2 x MIDI DIN 5 Pin (MIDN5) Female audio singal. MIDI Splitter Cable works for MIDI Keyboard, Synthesizer, Organ, Electric Piano, Guitar and Other electronic instruments, and the computer cable..
  • Converter: DIN 5PIN male to female cable. Molded 5-Pin DIN connectors pre-installed (DIN5 Male / DIN5 Female)..
  • Premium design midi extension cord suitable for industrial, automotive, and factory applications, with the midi male to female adapter, you can connect your PC or controller with an AT or MIDI keyboard instantly..
  • AUX headphone stereo input cable with straight-thru wiring (i.e. pin 1 to pin 1) per industry standards. High grade PVC cable jacket and over mold for excellent strain relief..
  • Nickel-plated din contacts for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity on the midi cable. OFC spiral shield for effective EMI and RFI rejection and flexibility..
Check Stock

Accusize Industrial Tools 4 Pc 90 Deg Indexable End Mill Set with Apkt11t3 Inserts, Cutter Diameter Includes 1/2'', 5/8'', 3/4'' and 1'', 0028-8416

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

E7018 3/32\ 1/8\ 5/32\ Premium Arc Welding Rods Carbon Steel Electrode 60 lb (10 lb x 6-pks) (1/8\ 60 lbs)

  • Cold rolled steels, or other steels containing high sulfur or selenium.
  • Low alloy and mild steels when stress relieveing normally would be required but cannot be done.
Check Stock

Professional Knife Steel Magnetized for Safety. Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use, Perfect for Chefs and Home Cooks Alike! (10', 3 Dot)

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also cause tiny metal particles from your blade to become airborne. Our honing rods are magnetized to prevent those particles from being inhaled or landing on nearby food..
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was meticulously chosen. You won’t find cheap plastic handles or soft, inexpensive steel. When you hold it, the weight immediately reveals how solid the construction is, and the design adds class to any kitchen..
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This is contrary to knife sharpening steels or wet stone sharpeners, which should be used sparingly. (More details in product description.).
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth to remove the metal particles. For....
Check Stock

F&D Tool Company 11091-A7382 Staggered Tooth Side Milling Cutter, High Speed Steel, 3.75\ Diameter, 1/2\ Width of Face, 1.25\ Hole Size

  • 90Degree Cutting angle Nickel Plated. Screw down insert.
  • All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, cast irons and aluminum alloys..
  • Fitted with 10Degree positive rectangular insert allow high depth of cut and feed per tooth.
  • with 1 Torx Wrench. Aluminum fitting case. Carbide insert for each end mill.
  • Uses APKT / APHW / APKR_APht / APMT insert (sold separately).
Check Stock

ConnectoRF Quick Interchangeable Ratchet Crimping Tool Kit with Plastic Case for Insulated & Non-insulated Wire Terminals Crimper With 5 Die Sets

  • 7pcs heavy duty ergo design interchangeable crimping tool kit for wire terminals, including one frame, 5 die sets for various applications, and one heavy duty plastic case..
  • Easy "push-to-release" tool frame. No extra tools are needed to change dies..
  • Die set#1 (HT-42C) For Non-insulated Terminals or Open Barrel Terminals AWG 20-18/ 16-14/ 12-10.
  • DIN 0.5-1/ 1.5-2.5/ 4-6 mm². Die set#2 (HT-42C3) For D-Sub Terminals AWG 24-30/ 18-22.
  • Die set#3 (HT-42E2) For Pin Terminals Insulated or Non-insulated Ferrules AWG 20/18/16/14/12/10/8/6.
  • DIN 0.5/0.75/1.0/1.5/2.5/4/6/10/16 mm². Die set#4 (HT-42H) For Insulated Terminals AWG 20-18/ 16-14/ 12-10.
  • Die set#5 (HT-42N) For Non-insulated Terminals AWG 18-16/ 14/ 12-10/ 8.
Check Stock

Auto Darkening Welding Goggles, View Area 4.72x1.37 Inch, Assemblable Welding Goggles with Mask Wide Shade 4/9-13, Adjustable Sensitivity Work for Cutting, Grinding for Tig Mig - TR1012

  • Viewing Size 4.82 x 1.37 inch, Optical Class: 1/1/1/2..
  • Light shade: DIN4, Dark shade DIN5-DIN9/DIN9 -DIN13, stepless control, set by hand according to the situation. Dark to light :0.1 s~ 1.0s ,stepless control..
  • 2 Premium Sensors provide you accuracy and redundancy that enables quick detection, precise control, and speedy response..
  • Lightweight, easy to carry, virtually eliminates neck strain. welding goggles compatible with a hard hat as well..
  • Great For TIG MIG MMA, Plasma Applications with Grinding Feature. (Extra CR2450 battery included).
Check Stock