Top Diode Laser Marking Machine

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • ... wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection methods, such as viewing the engraving progress, adjusting the carving speed and other operations. In particular, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Computer IP Address Connection..
  • POWERFUL COMPATIBILITY & 1v N SPECIAL FUNTION: As the latest 32-bit chip is used, the engraving machine is compatible with LaserGRBL and paid LightBurn softw....
Check Stock

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • ...Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light source,  marking precious metals hardly consumes precious metals themselves. ENJOYWOOD M4 industrial-grade galvanometer technology greatly improves the engraving and marking speed - 12m/s high speed is 5 times faster than blue light marking machines.Safe use,Unlike the blue light source, the 1064nm infrared wavelength is a cold light source. Even if....
Check Stock

LaserPair Fiber Laser Safety Glasses, Eye Laser Protective Glasses 740 1100nm for Nd:yag Laser, Diode Laser Technician Goggles

  • Alexandrite Laser Safety Glasses, Diode Laser Safety, ND:YAG Laser protection 740 1100nm O.D 5+ V.L.T 30%.
  • Typical laser wavelength755nm, 808nm, 908nm ,1064nm laser light.
  • Alexandrite, Diode, ND:YAG Laser Safety glasses 1064nm laser glasses.
  • Certifications:CE certified by DIN CERTCO Laser Safety Glasses.
  • Special for ergonomics, harmlessness, comforts, airing and flexibility.Safety glasses with wrap-around design.Flank with unique ventilation and protection system, protect eyes from splashing all-round..
Check Stock

OMTech 20W Fiber Laser Engraver, LightBurn Compatible Laser Engraving Machine with Red Dot Pointer, 4.3x4.3 Solid State Laser Marking Etching Machine for Metal Aluminum Steel Gold Silver Jewelry More

  • Laser Power: 50W . Marking Area: 175*175mm .Engraving Depth:≤1mm(0.024in).D80 Rotary Axis.
  • Pulse Duration: 200ns. Control board : BJ JCZ board(Original).EZCAD2.Compatible with Windows XP/Vista/7/8/10.Stable performance and high reliability..
  • Imported laser scanning system makes the marking speed up to 7m/s.
  • High-Rate of Electrical-Optical Conversion: up to 70%..
  • Free Shipping.ETA:5 days.No Import Duty.2 year warranty.Remote assistance,Customer and Technical Support.English User Manual and Demo Video offered by USB flash disk along with the machine.Returnable for Non-human-induced Malfunction Machine..
  • Applicable material: Fiber laser marking machine can work on all metals such as aluminum,stainless steel, brass, copper etc. and some of nonmetal such as nylon ,light button, ABS , PVC ,PES etc..
Check Stock

ATOMSTACK A20 Pro 20W Laser Engraver and Cutter, 130W Laser Engraving Cutting Machine with Air Assist Kit and R3 Rotary Roller,Laser Engraver for Wood and Metal, Vinyl, Acrylic, Glass

  • Thickest Cuts by 20W Highest Power Diode Laser Engraver and Cutter: ATOMSTACK A20 pro is the World's First Quad-Core Diode laser engraving and cutting machine. 15mm solid wood and 8mm acrylic by single cut.It can even cut 0.05mm stainless steel sheets, wood up to 25mm and acrylic up to 30mm..
  • Fastest and Cleaner Cutting: 20W highest power laser, it can cut faster and deeper than other power lasers. Buit in F30 Pro upgraded air assit kit that makes you can enjoy the concise beauty.It can increase laser cutter efficiency to save your time.Quickly and efficiently reduce the surface temperature of objects during the engraving and cutting process, and the edges will be cleaner and clearer..
  • More Precise and Multiple Colours Engraving: ATOMSTACK A20 pro laser engraver with a newly upgraded 32-bit motherboard works more smoothly and stable. The advanced built in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieving the finer engraving result and higher contrast effect. The finished pattern is like sketching on paper. The effect is more delicate and natural in the overlay of black and white..
  • Meet Your Business Needs: ATOMSTACK A20 PRO configures the touch control panel, support offline engraving. You can carry out engraving work anytime a....
Check Stock

100W JPT M7 MOPA Fiber Laser Marking Machine Fiber Laser Engraver Laser Marker 300×300mm with 80mm Rotary Axis

  • Laser Power: 100W+Marking Area(Lens): 300*300mm+Engraving Depth:≤2mm+80mm Rotary Axis+800mm Taller Tower EZCAD2(Compatible with Lightburn).
  • Application Advantage: Metal surface processing, peeling coating.
  • Semi-conductor&electronics industry applications.
  • Excellent marking effect on plastic or other sensitive material.
  • Black and color marking on stainless steel..
  • High-Rate of Electrical-Optical Conversion: up to 70%.
  • Imported laser scanning system makes the marking speed up to 7m/s. Re-position precision is 0.002mm.
  • 2 years warranty. Customer and Technical Support.
  • Easy Operation, English User Manual, VCD training video, software sending together with the machine. Ships by UPS with strong wooden case packing. No extra charge when arrived..
Check Stock

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

  • Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
  • This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
  • Aspherical glass lens provides tight Dot Laser in large temperature range..
  • Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
  • Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
Check Stock

OMTech 30W Fiber Laser Engraver, LightBurn Compatible Laser Engraving Machine with Red Dot Pointer, 6.9x6.9 Solid State Laser Marking Etching Machine for Metal Aluminum Steel Gold Silver Jewelry More

  • PROFESSIONAL METAL MARKING: OMTech's 30W laser engraver employs the world-famous solid-state fiber laser, with an MTTF of over 100,000 hours of operation.
  • this 1064nm laser marking machine's 65μm spot size is ideal for applications with tight tolerances and offers incredibly smooth and precise results.
  • PRECISION OPTICS: This etching and marking machine's high-speed Sino-Galvo galvanometric system offers continuous marking speeds as high as 275 ips (7000 mm/s).
  • its 200 ns pulses can be processed at rates from 1-600kHz for quick scanning, engraving, and turn around.
  • and our compact Fθ field lens provides a 175x175 mm (6.9x6.9 inch) scanning range with less than 1% distortion.
  • EASY SETUP: This fiber laser cutter's clear instructions and modular design allow quick assembly.
  • the work area's grid dots support positioning bars that can be used to hold your material in just the right place every time.
  • a precision height scale keeps manual focusing exact and easily replicated.
  • and the 4-pin port allows plug-and-play connection to your rotary axis (not incl.) for marking on rings, cups, pipes, and other curved surfaces.
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

SCULPFUN Laser Cutting Honeycomb Working Table Board for CO2 or Diode Laser Engraver Cutting Machine, for Slight Burnt & Smooth Edge Cutting, Visible Cut-Through, Table-Protecting, 300x200mm

  • Necessary Accessories for Laser Cutting: After using this laser cutting honeycomb table to cut wood, acrylic and other materials, the edges of the materials are neat and clean, not easily burnt by laser or yellowed by smoke, so you can get a nice cutting work..
  • Cutting Through Observable Design: We add 4 height increase pads for easy view. When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to judge whether cutting through..
  • High Quality Full-Metal Structure：SCULPFUN honeycomb table is made of metal, processed by high-precision CNC, it’s strong, stable, rust-proof, durable and high flatness..
  • Safe Metal Pad & Precise Scale Lines: Comes with a metal pad to protect the table from laser damage. A right angle measuring scale on the X and Y axes allows easy and quick measurement of the cutting object..
  • Wide Compatibility: Compatible with various laser engraving machines, such as diode DIY laser engraving machine and CO2 laser engraving machine..
Check Stock

ATOMSTACK A20 Pro 20W Laser Engraver and Cutter, 130W Laser Engraving Cutting Machine with Air Assist Kit and F1 Honeycomb Working Table, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Glass

  • Thickest Cuts by 20W Highest Power Diode Laser Engraver and Cutter: ATOMSTACK A20 pro is the World's First Quad-Core Diode laser engraving and cutting machine. 15mm solid wood and 8mm acrylic by single cut.It can even cut 0.05mm stainless steel sheets, wood up to 25mm and acrylic up to 30mm..
  • Fastest and Cleaner Cutting: 20W highest power laser, it can cut faster and deeper than other power lasers. Buit in F30 Pro upgraded air assit kit that makes you can enjoy the concise beauty.It can increase laser cutter efficiency to save your time.Quickly and efficiently reduce the surface temperature of objects during the engraving and cutting process, and the edges will be cleaner and clearer..
  • More Precise and Multiple Colours Engraving: ATOMSTACK A20 pro laser engraver with a newly upgraded 32-bit motherboard works more smoothly and stable. The advanced built in 256-bit color scale with 0.08 * 0.1mm ultra-fine laser focus area achieving the finer engraving result and higher contrast effect. The finished pattern is like sketching on paper. The effect is more delicate and natural in the overlay of black and white..
  • Meet Your Business Needs: ATOMSTACK A20 PRO configures the touch control panel, support offline engraving. You can carry out engraving work anytime a....
Check Stock