Top Direct Injection Diesel

Diesel Engine, 3HP 196CC 4-Stroke Single Cylinder Air Cooled Diesel Motor, Manual Recoil Start Horizontal Shaft Engine for Go Kart, Lawn Mower, Power Generator, Wood Splitter

  • 【SELF-INJECTION DIESEL SYSTEM】4 Stroke 196CC GDNTMU Diesel Engine, equipped with elf-injection diesel system, good atomization, low oil consumption, more punctual diesel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【MAIN PARAMETERS】Shell material: Aluminum, Displacement: 196CC, Speed: 3000 RPM, Maximum output: 2.2KW, Number of cylinders: Single Cylinder, Engine cooling method: Air Cooling, Start method: Manual Start, Starting system: Hand Recoil, Ignition method: Compression Ignition, Compression ratio: 22:1, Diesel: #0 diesel, Diesel consumption rate: 0.7 lb/kw.h, Diesel tank capacity: 100 fl oz, Engine oil capacity: 24 fl oz, Net torque: 8Nm / 2880rpm..
  • 【GOOD COOLING PERFORMANCE】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening....
Check Stock

Diesel Engine 196CC 4 Stroke Single Cylinder Forced Air Cooling Horizontal Axis Engine Recoil Hand Start 3000RPM 2.2KW, 53mm Shaft Length (Orange)

  • 【SELF-INJECTION DIESEL SYSTEM】4 Stroke 196CC Diesel Engine, equipped with elf-injection diesel system, good atomization, low oil consumption, more punctual diesel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【GOOD COOLING PERFORMANCE】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【SUPERIOR DIESEL SYSTEM】Large capacity diesel tank, enhanced thickening, large diesel tank volume, special painting process, seam welding, and oil leakage. Optimize the diesel system and intake and exhaust systems to save energy and diesel..
  • 【MAIN PARAMETERS 1】Model: 168F, Shell material: Aluminum, Displacement: 196CC, Speed: 3000 RPM, Maximum output: 2.2KW, Number of cylinders: Single Cylinder, Engine cooling method: Air Cooling, Start method: Manual Start, Starting system: Hand Recoil, Ignition method: Compression Ignit....
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

Universal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015

  • 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
  • 【DIESEL ENGINE SPECIFICATIONS】Model：186F Туре：Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system：Direct injection Bore*stroke(mm)：86x70mm Displacement capacity(cc)： 406cc.
  • 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
  • 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
  • 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock

Motul 107972 Set of 2 6100 SYN-nergy 5W-30 Motor Oil 5-Liter Bottles

  • Advanced Technosynthese lubricant for High Performance/Protection.
  • Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
  • Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
  • Can be mixed with synthetic/mineral oils..
  • Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..
Check Stock

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

FICM Engine Fuel Injector Complete Wire Harness - Replaces Part 5C3Z9D930A, 5C3Z-9D930-A - Compatible with Ford Vehicles F250 F350 F450 F550 - Powerstroke 6.0L Diesel - 2003-2007

  • Replacement Fuel Injector Control Module (FICM) Harness - This wire harness connects the fuel injectors on your 6.0 Powerstroke diesel engine to the FICM module. This is a complete wire harness with all connectors. If your truck is experiencing injection fault codes, idling or running rough your factory wiring may have a short or loose connection. Replace it and get you 6.0 Powerstroke running right..
  • Compatible Replacement for Ford Vehicles - 2003, 2004, 2005, 2006, 2007 F250, F350, F450, F550 and Excursion with the 6.0 Powerstroke Diesel engine. Including model years 03, 04, 05, 06, 07..
  • Replaces Part# - Replaces part number 5C3Z9D930A and 5C3Z-9D930-A - While this is a not a genuine OEM part, it is a direct replacement for the factory FICM injector wiring harness found on your F250, F350, F450, F550, or Excursion. Powerstroke 6.0 diesel Super Duty..
  • OEM Fit, Quality, Finish - This FICM wiring harness features OEM connections for a perfect connection to the FICM and the diesel fuel injectors. High temperature wires are used throughout to insure longevity. The entire wire harness features a high temperature wire loom to product both the harness and pigtails from the heat in your F250, F350, F450, F550, or Excursion's engine bay..
Check Stock

Lichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, B1BK

  • FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
  • WIDE COMPATIBILITY - Suitable for most gasoline engines on car, truck, SUV, motorcycle, ATV, RV. NOT FOR diesel high pressure injection pump or direct-injection engine, INCOMPATIBLE WITH EFI, CIS or TBI System, INCOMPATIBLE WITH Ford 1/4" Small Schrader Fitting.
  • UP TO 140PSI / 10BAR - Provide with dual scale accurate readings 0-140psi (0-10 bar), easy to read and provide you more precise and accurate readings.
  • ALL IN ONE SET - Equipped with various adapters and hoses to connect for testing, great for 1/4" standard Schrader valve and M6/M8/M10/M12/M14 service port. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles..
  • LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking.
Check Stock

Adorish 0-140PSI Fuel Injector Injection Pump Pressure Tester Gauge Kit Fuel Pressure Test Kit TU-114 for Auto Car Truck SUV Motorcycle ATV RV

  • Application: Fuel pump pressure tester is suitable for various gasoline engines such as cars, trucks, SUVs, motorcycles, ATVs, RVs (except Bo-sch, CIS Je-tronic, GM car throttle body systems), not suitable for diesel high-pressure injection pumps or direct injection engines..
  • Fittings & Hoses: M8/M10/M12/M14 adapter for corresponding fuel Test port on rails.
  • 15"L hose for direct connection to 1/4" SAE standard US valve on the fuel pump.
  • Aluminum tee helps in-line splicing between the fuel pump and engine on most vehicles..
  • Fuel Pressure Gauge: A large 3-1/2" dial protected by a rubber cover, a 0-140psi/0-10bar range, and a two-color coded scale for easy reading..
  • Material: Made of high-quality brass, steel, rubber, plastic, provide accurate reading and long-lasting products..
  • Storage: Nice carrying case and a well-made tool, great for DIY or even professional use..
Check Stock

Diesel Engine, TBVECHI 4 Stroke 196CC Engine Air Cooling Single Cylinder Motor Recoil Hand Start 53mm Shaft Length 3000RPM 2.2KW, 3L Air Cooling Vortex Oil System

  • 【Self-Injection Fuel System】4 Stroke 6HP Diesel Engine, equipped with elf-injection fuel system, good atomization, low fuel consumption, more punctual fuel injection, and long service life. Compact structure, small size and light weight. Compared with gasoline engines, it is more economical and lighter than vertical diesel engines..
  • 【Good Cooling Performance】Enhanced thickening alloy box, fast heat dissipation, low oil temperature, light weight. Through advanced software analysis and optimized design, the reliability of the diesel engine in terms of structure and cooling is ensured..
  • 【Superior Fuel System】Large capacity fuel tank, enhanced thickening, large fuel tank volume, special painting process, seam welding, and oil leakage. Optimize the fuel system and intake and exhaust systems to save energy and fuel. Alloy box, Enhanced thickening, fast heat dissipation, low oil temperature, light weight..
  • 【Application】Widely used in pasture management machines, irrigation and drainage machines, generator sets, small transport vehicles, small walking tractors and other small agricultural machinery fields..
Check Stock

Motorcraft DPFE6 Exhaust Gas Recirculation Pressure Feedback Sensor

  • ...fit for Ford E-350 Econoline Club Wagon 97-02, fit for Ford E-550 Econoline Club Wagon 02, fit for Ford E-450 Econoline Super Duty Stripped 01, fit for Ford Excursion.for 01 Ford F-650 00-01, fit for Ford E-450 Econoline Super Duty 00, fit for Ford F-250 F-350 97 - 7.3L Powerstroke ONLY.
  • [Part Number] - 7.3 IPR fuel injection pressure regulator valve replace F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013 for a proper fit, include IPR Valve and ICP control sensor seal kit..
  • [Durable] - Every 7.3 IPR fuel injection pressure regulator valve and ICP control sensor have passed undergoes more stringent testing than aftermarket products, engineered for long lasting performance, durability, and dependability..
  • [Installation] - 7.3L fuel injection pressure regulator IPR valve + ICP control sensor installation is super easy and direct fitment and perfect replacement, meets or exceeds OEM standards. We offer 2 years service, any questions about the product, pls contact us in time. We will reply to you within 24 hours.
  • [Service + Package include] - You will get a 24-month shelf life for 7.3 IPR valve + ICP control sensor. If you have any questions, please contact....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock