Top Direct Spring Operated Pressure Relief Valve
Summit Aftermarket Replacement for JD AL166181 Hydraulic Female Quick Coupler
- Direct aftermarket replacement for JD AL166181 Female Quick Coupler.
- Used on JD Models 6400 6410 6420 6430 7430.
- Breakaway Coupler with Push Pull Design w/Male Thread with O-RIng.
- Replacement for Part Numbers: 3384873M8 AL166181 AL119348 AL170665.
- Internal Pressure Relief Valve allows connection under pressure.
Check StockWatts Tankless Water Heater Service Valve Kit
- TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
- SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
- MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
- LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
- WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check StockHydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters
- SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
- POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
- HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
- FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
- TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check StockUnisex Adult Steampunk Gas Mask Costume Accessory, Gold, One Size
- TANKLESS WATER HEATER VALVE KIT: Watts LFTWH-FT-HCN service valve kit for tankless water heater valves simplify the installation, maintenance and operation of tankless water heaters..
- SERVICE VALVE KIT FOR TANKLESS WATER HEATER: The tankless water heater service valve kit replaces up to 18 fittings and 16 connections used in typical tankless water heater installations, color-coded tee handle. Optional pressure relief and check valve..
- MULTIPLE CONNECTION VALVE KIT: They are available in two valve sets or as a single valve with female threaded, union or quick-connect end options. The service valve kits are available with or without a relief valve. Facilitate service and maintenance with cold water inlet and hot water outlet valves certified to NSF/ANSI 61..
- LEAD FREE VALVE KIT: The wetted surface of our Lead Free products contacted by consumable water contain less than one quarter of one percent (0.25 percent) of lead by weight..
- WATER SERVICE VALVE KIT: Purge/drain ports allow regular cleaning to remove scale build-up. The kit includes LF4L - Lead free poppet type pressure relief valves for protection against excessive pressure and LFTWH - Lead Free Tankless Water Heater Valves..
Check StockTolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters
- SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
- VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
- PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
- MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
- TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check StockMityvac MV6400 1 Gallon Fluid Dispensing System for Topping Off Fluid Reservoirs, Master Cylinders Includes 5 ft. Hose with Wand and Flow Control Valve
- The MV6400 is intended for filling reservoirs with fluids such as engine coolant, motor oil, or wiper, automatic transmission, brake or power steering fluid. However, with the proper accessories it can safely be used to pressure bleed hydraulic brake or clutch systems, or refill or top-off sealed automatic transmissions..
- An integrated manual pump dispenses fluid by pressurizing the 1.2 gallon (5 liter) reservoir and Includes a thumb-operated tilt valve that is conveniently located for manual pressure relief and doubles as a safety valve to prevent over pressurization..
- Fluid is continually dispensed as long as there is pressure in the reservoir and freeing up the operator’s hands.
- pumping is only required to build additional pressure..
- The pump tube is sealed to prevent exposure to chemicals and cleans easily between fluid changes..
- For convenience and speed, push-to-connect, quick-change-style couplers are used at both ends of the fluid dispensing hose..
Check StockAcecare Charging Station Also Called Filling staion for Compressed air refilling
- CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
- WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
- EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
- WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
- WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check StockDA YUAN 14 pcs Automotive Cooling System Radiator Pressure Tester Kit
- Aluminum adapters for use with most cars trucks.
- Kit includes hand pump to 35 PSI, 12 Aluminum Radiator Adapters, Thermometer, Form Fitted Case.
- Tester helps detect internal and external leaks..
- Perfect for head gasket failure detection (which side of block or which cylinder leaks) ..
- Thumb-operated relief valve for quick and easy pressure release and self-locking quick-disconnecting components..
Check StockWantJoin Pressure Cooker, 12 Quart Stainless Steel Pressure Canner, Induction Compatible Cookware with Spring Valve Safeguard Devices,Compatible with Gas & Induction Cooker
- ...fethe 2200 tons of impact sandwich bottom make the cooker spreads heatevenly and causes no scorch to the food inside, the overall steamline design of the cooker makes it elegant in appearance and energy saving in use..
- ✔[12 LITER LARGE CAPACITY]----12.6 qt large capacity pressure cooker, you can cook a large amount of food at one time, professional pressure cooker is the best choice for commercial use or home use..
- ✔[MULTIPLE SAFEGUARD DEVICES]----Special indicative springvalve is designed when there is enough steam pressure inside the cooker, the niddle lever of the spring valve will float up, while it will go down when there is less steam pressure inside the cooke. When the steam pressure inside the cooker exceeds safety limit, the spring valve can automatically relief the pressure ensure safe use. This kind of design is a breakthrough to traditional pressure cooker technology..
- ✔[ANTI-RUST & HIGH TEMPERATURE RESISTING]----The connecting piece for the float rod and the sliding piece are both made of quality stainless steel. They have strong anti-rust and high temperature resisting performance..
Check StockJIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV
- FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
- 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
- PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check StockTool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack
- Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
- Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
- Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
- Made of brass. Max. inlet pressure of pumps is 200 PSI..
- Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock6.0 POWERSTROKE KC STAGE 2 TURBO (04-07)
- ◭ [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty..
- ◭ [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035.
- ◭ [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system..
- ◭ [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robu....
Check Stock