Top Do it yourself Electrical Safety
The Hillman Group 44826 1/4-20 x 6-Inch Threaded Rod, 8-Pack
- Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
- Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
- The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check StockThe Hillman Group 44822 1/4-20 x 3-Inch Threaded Rod, 8-Pack
- Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
- Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
- The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check StockThe Hillman Group 44828 3/8-16 x 6-Inch Threaded Rod, 5-Pack
- Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
- Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
- The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check StockThe Hillman Group 44827 5/16-18 x 6-Inch Threaded Rod, 7-Pack
- Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
- Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
- The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check StockThe Hillman Group 44823 5/16-18 x 3-Inch Threaded Rod, 7-Pack
- Designed For Hanging, Connecting, Clamping, And Support For Plumbing, Heating And Electrical Applications And Other Do-It-Yourself Projects.
- Threaded Rods May Have A Drive Slot In One End To Facilitate Installing The Stud.
- The Rod Features Steel Construction And They Are Designed To Be Used Where Tension Is Expected.
Check StockSouthwire 9042SW8801 UL Listed Electrical Outlet Gas Range Adapter Converting A 250 Volt Receptacle for an Electrical Range to a 125 Volt Receptacle for A Gas Range
- ...Might be referred to as 240 volts, 250 volts, and 220 volts. This unit is rated to 250 volts and will address these applications..
- [Note on what this unit won't do] sometimes we get questions on if this item will convert an electric range to a gas range. While we wish it would do that, this item will only handle the electrical part of the conversion, you will still need to run a gas line..
Check StockTEMCo TH3030 Dual Size Conduit Offset Bender 2 in 1 - both ½“& ¾” EMT
- TH3030 is 2 offset benders in 1 tool. Electrical Box Offsets can be made in both ½” and ¾” EMT with this one tool – NO NEED to buy more than one unit to bend both sizes..
- TH3030 easily makes quick accurate offset bends with one motion of the bender. The quality bend allows for improved connections to the electrical box and reduces time in bending offsets by eliminating the double bend with a hand bender..
- NO TOOLS REQUIRED to change bender from ½” to ¾” – Die change from ½” to ¾” can be made in less than 1 Minute. Dies are configured to assemble so that there is no possibility to mix up sizes..
- Light weight aluminum construction reduces weight to allow ease of use and movement at the job site while maintaining a quality tool producing quality repeatable bends..
- High Quality, Easy to use offset bender for the professional, industrial application or the Do It Yourselfer with TEMCo’s 1 year guaranteed full refund and 5 Year Warranty.
Check StockVOLT Top Dog 12V Cast Brass Outdoor Spotlight with Ground Stake (Bronze)
- SAFE LOW VOLTAGE OUTDOOR USE – AC/DC 12V working voltage compatible with most low voltage landscape lighting systems, Extra low voltage transformer Required for installation (NOT INCLUDED in this pack). Low voltage systems carry very little risk of electrical shock and can be safely installed by homeowners as a do-it-yourself project..
- ECO-EFFICIENCY – Our expert LED accent lighting system, decreases energy consumption, provides long-term cost-savings and needs almost zero maintenance. The 4-Watt LED MR16 Bulb offers 320 Lumens light output in 3000 Kelvin warm white color temperature. And the LED MR16 Bulb can be easily replaced..
- ROTATABLE & WIDELY APPLICATIED – 270 degree adjustable head offers best lights for the walls,trees,flags & fences.
- widely used for garden,yard patio pathway,driveway and outdoor decoration. Eliminating the dark areas of your exterior with the directional bright light beams of a spotlight can increase the safety and security of your home and can even improve your home value..
- EASY TO INSTALL – Just screw the ground spike on to the spotlight and Insert the 8" Heavy Duty ground spike into the suitable ground where you want. Extra accessories needed: transformer, wire connectors and low voltage wires (NOT INCLUDED in ....
Check StockWORKPRO W001312 3 Piece Pliers Set, Drop Forged Carbon Steel Construction, 6 inch, (1 set)
- This tool set is used by both electricians and Do-It-Yourselfers for light electrical work.
- Contains: 6-inch long nose pliers, 6-inch slip joint pliers and 6-inch linesman pliers.
- Drop forged carbon steel construction with Ni-Fe coating for a corrosion-resistant finish.
- Double-dipped comfort handles ensure safe and secure non-slip.
Check Stock12-48V Master Battery Disconnect Switch, High Current 200A Battery Power Cutoff Isolator Killer Switch with Face Plate for Car Vehicle RV Truck Boat Marine Outboards ATV On/Off Battery Isolator Switch
- UNIVERSAL BATTERY DISCONNECT SWITCH - High current battery disconnect switch is designed to cut off the electrical power of the electrical system, which protects against electrical fires and theft when equipment is not in use and provides a reliable way to shutdown electrical power during maintenance and protect batteries from excessive battery drain. Disconnct the battery when you are not driving a car / boat / RV / vehicle / ATV / Trailers / Off-road, etc. Keep you safe all the time..
- APPLICATIONS - Rated to 200 Amps continuous duty, 1000 Amps intermittent duty, used for 12-48 VDC systems to isolate and secure the electrical system. Master battery disconnect switch is widely used for ATVs, Trailers, UTVs, Cars, Marine Outboard, Off-road, RVs, Trucks, Heavy Vehicles, and electrical equipment's switch..
- PREMIUM QUALITY - Master battery disconnect switch with face plate is made of robust aluminum alloy heavy duty housing, strong weather resistance and long service lifespan. It can protect the internal components of the switch for use in the harsh condition. Replace part number: 20701, 062790..
Check StockAgraTronix EFB-1 Electric Fence Beeper - Portable, Compact Electrical Tester for Agricultural Fencing w/Replaceable Battery
- DIY FENCE TESTER: This is the safest way to find out if the electric fence is working. You don’t need to risk yourself or someone else by touching a potentially live wire. Instead, this battery-operated tester has to be simply placed near the electrical fencing..
- CONVENIENT USE: There is expensive equipment out there for electric fence testing. But this fence tester has an amazingly simple operation without any setup or installation. It emits a high-pitch beech upon detecting live wiring fences—easy, impossible-to-miss alerts!.
- COMPACT DESIGN: Pocketable design ensures the portable current tester can be carried anywhere. The fence beeper is easy to attach to a keyring, ensuring you don’t need to plan a day for checking-out the live wire status of your fenced perimeters..
- NO CONTACT TESTING: The keyring beeper has to be placed in the proximity of the fence lines. This ensures user safety even when the conditions are wet and chances of electrical shocks is at its maximum..
- PRODUCT SPECIFICATIONS: This Electric Fence Beeper comes with replaceable batteries and a keyring attachment. The live wire test device is available in Black color. Made from tough materials, it can withstand the outdoors..
Check StockWorx WX572L 5.5 Amp BladeRunner Portable Electric Table Top Saw
- [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
- [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
- [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
- [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
- [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
Check Stock