Top Dom Ide Male Connector

WSDMAVIS 1 Pcs SD Card to IDE Adapter 2.5 Inch 44Pin Male Adapter SD SDHC SDXC MMC Memory Card Converter to Laptop HDD

  • Use this product to convert SD card into 2.5inch 44pin IDE interface.There are two main control chips on this board, and there is an SD card socket on the back..
  • Compliance with SD specification Ver2.0, IDE/ATA-33 specification.Standard IDE interface interface: true-IDE mode, and supports DMA-33 transfer mode.
  • The IDE interface is a 44-pin/2.0mm male connector..
  • The SD card can become an OS and application software that can directly start the device.
  • Support DMA and ULTRA DMA mode, suitable for DOS, NT4, WINDOWS98SE, ME, 2000, XP, VISTA, MAC, Linux systems..
  • Installation method:First install the SD card into the product slot, and then connect the hard drive data cable to the interface of the notebook hard drive. It can be operated and used after the power-on test is normal..
  • Note: for soft routing, the size of the SD card should be within 1G. For example, if WIN98, WIN ME, WINXP, and the system are installed, the SD card capacity should be more than 2GB. If you require high speed, please choose a high-multiplier flash memory card.Maximum support 128G SD card..
Check Stock

AITIAO 2Pcs SD Card to 2.5 Inch IDE Adapter SD SDHC SDXC MMC Memory Card Converter TF Memory Card to IDE 44Pin Male Adapter to Laptop HDD for DOS/Linux/Windows 98SE, Me, 2000, XP and for Vista.

  • The SD Card to 2.5 Inch IDE Adapter Adapt SD/MMC flash memory card to a super compact, SD card has the characteristics of small size, large capacity, anti-seismic and moisture-proof, high-temperature resistance, stable performance, permanent and effective data storage, no noise, no seek error..
  • Enables IT engineers and embedded technology enthusiasts to use SD/MMC card as a normal IDE 2.5" hard disk.Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • IDE Adapter supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm..
  • Attention: This SD Card to 2.5 Inch IDE Adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

GODSHARK SD Card to 2.5 Inch IDE Adapter, SDHC SDXC MMC Memory Card Converter to Laptop HDD 44 Pin Male PATA Port

  • Adapt SD/MMC flash memory card to a super compact, cost efficient, anti-shock, low power consumption, no acoustic noise and fast access time HDD.
  • Enables SD/MMC card as a normal IDE 2.5" hard disk.
  • Provides an alternative for data storage and transfer or test for motherboard, sound/audio/memory card, etc..
  • Ideal for some devices that required a fast and easy bootable device such as POS. Be a SD/MMC card reader/writer.Compatible with SD, SDHC, SDXC & MMC specification.One 2.5" IDE hard disk driver 44pin male connector and one standard SD socket..
  • Supports PIO, Multi-Word DMA and Ultra DMA data transfer mode.Supports boot function.No external power required and powered from IDE interface.Easy installation and no driver required.Mini board design and no space wasted.Dimensions: 36mm x 52mm.Attention: This adapter does not support hot-swap of CF cards, so please turn off power when changing cards..
Check Stock

SATA Power Cable Adapter 3 Pack SATA 15 Pin Male to Molex LP4 Female Power Cable 8-inch

  • SATA Power Cable Adapter can be SATA power supplies to power IDE hard drives.
  • SATA 15 Pin Male to Molex LP4 Female Power Cable Provides 8" in cable length.
  • SATA to LP4 Power Cable Adapter SATA 15pin revolution 4pin power cord..
Check Stock

AcomData Samba 3.5��� USB 2.0 (PATA-IDE/ SATA) Hard Drive Enclosure Kit, Radiant Red (SMBXXXU2E-RD)

  • ...can easily connect your hard drives through a USB port as an additional external hard drive to read& backup data, operate formatting hard drives, and transfer files.
  • HIGH-SPEED TRANSFER UP TO 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1. It has a dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector, which you can get all your hard drives combo.
  • SUPPORT DRIVE HUGE CAPACITY UP TO 6TB: Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. SATA to USB 3.0 adapter has a SATA III connector and two IDE connectors (40pin and 44pin). we Provide a 4pin power cable for a 3.5″ IDE drive, Tips: Some IDE hard drive is old, you need to set a jumper to turn on the disk(set the master disk and the slave disk).
  • WIDE COMPATIBILITY: Hard drive adapter support hot-swapping. universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac OS 9/ 10, Linux.
  • work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. (When connecting two IDE hard drives, please set the master drive and slave drive based).
  • COMES WITH 12V 2A POWER ADAPTER- USB 3.0 to IDE SATA adapter included 12V2A AC power supply, 4pin power cable is designed for a 3.5’’ IDE drive.
Check Stock

CERRXIAN SATA Female to 40 pin Male 3.5 inch IDE Adapter for PC to SATA Hard Drive Interface Adapter

  • One Female SATA 7+15pin port, one 3.5Male PATA port (40-pin IDE), and one 4-pin Molex power connection Adapter.
  • SATA Female to 40 pin Male 3.5 inch IDE Adapter allows you convert hard drive interfaces to work with newer/older systems..
  • Converts Parallel ATA(PATA, ATA, IDE) to Serial ATA (SATA) Converts SATA to PATA/ATA/IDE/EIDE..
  • Package: Sata to Pata Interface Adapter x1..
Check Stock

SinLoon SCA 80 Pin to 68 50 Pin SCSI Adapter SCSI 68 Female Adapter SCSI 80 Male Adapter for Data Transfer (50/68/80)

  • Product Name: SCSI three card 68-80-50 ide SCSI hard disk adapter 68 Pin Female to 80 Pin Male to 50 pin IDE (SCSI 80 pin, 68 pin, 50 pin adapter).
  • SCSI 68 Female Adapter card is used to convert these interfaces. For example, some adapter cards can convert male to female, and some can convert 50 pin interface to 68 pin interface. In this way, 50 pin low-speed SCSI devices can be connected to 68 pin SCSI interface..
  • SCSI Three Turn Card. Jumper setting for 16 SCSI IDs. Spindle synchronous, delay start & remote start..
  • The main function of the adapter card is to convert different SCSI interfaces, for data transfer between 2 SCSI drives..
  • Note: It's a 50 pin IDE,Only available on industrial server IDE 50-pin motherboards. not a 40 pin or 44 pin ide of an ordinary computer. It can't be used on an ordinary computer. Please pay attention!.
Check Stock

SDTC Tech 4 Pin Male IDE Molex to 15 Pin Female Dual SATA Power Splitter Adapter Cable 18AWG Copper Serial ATA Hard Drive Extension Cable (20cm) - 2 Pack

  • IDE Molex to SATA Power Cable, Converts 4-Pin male plug into 2x 15-Pin Serial ATA Female Connectors..
  • Cable: 1007 18AWG, Length: approx. 20cm, Conductor: Copper..
  • Installation: Connect to motherboard 4-Pin IDE Molex Connector and the other side Connect to15-Pin Hard Drives or CD ROM Drives Plug..
  • Use to adapt older power supply uints for use with new SATA devices, and powering two devices from one interface..
  • Application: suitable for Hard Drives, Solid State Drives, CD ROM Drives, HHD, SSD, DVD Drives etc..
Check Stock

Xiwai SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

  • SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive  2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
  • Works with all SATA Drives up to 500GB  Supports IDE 66/100/133MB/s.
  • No need for an extra power supply.  44 Pin IDE connector powers the Drive no other cables or adapters are needed.  No driver needed, plug and play,....
  • Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.  Adapter is good for up grading an old....
  • Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Check Stock

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader 35BAYCF2IDE

  • Connect a CF card to a computer through an IDE connector.
  • Compatible with compact flash memory cards and desktop computers with an IDE slot.
  • Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
  • Quick and driver free installation into any IDE 40 pin and 44 pin slot.
Check Stock

Coolgear USB 3.0 to PATA and SATA 3.5 and 2.5 inch Hard Drive Adapter

  • DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector..
  • Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1..
  • Included 12V 2A power cable is for providing stable electricity supply. Note: 4PIN Power Cable is designed for 3.5’’ IDE drive, SATA drives are not applicable and unnecessary..
  • On/Off Switch for HDD protection. LED light shows power and activity status..
  • What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support..
Check Stock

EZ DUPE HD Pal Pro 1 to 3 Hard Drive Duplicator 36GB/Min & Analysis Lab - Deluxe Kit with Rugged Protective Case - SATA & IDE PATA 3.5' & 2.5' HDD/SSD Storage Backup - DM-HS3-4H3BP(D)

  • ▶Universal SATA IDE Hard Drive Adapter: Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. the USB to ide SATA adapter Support SATA 2.5″/3.5″ HDD.
  • 2.5″/3.5″ IDE HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive.
  • converter allows you to retrieve old files, backup, cloning and upgrade for a speedy transfer.
  • ▶SuperSpeed Performance up to 5Gbps: With an external hard drive adapter, you’re only able to use one drive at a time. Fortunately, this means that you can get the same high performance you’d expect. it supports a data transfer rate of up to 5 Gbps, supports UASP. which is 70% Faster than traditional USB 3.0 and 40% reduction in required processor resources, Backward compatible with USB 2.0 / 1.1.
  • ▶Broad Compatibility: You can use IDE drives, standard SATA drives, The USB to ide SATA adapter compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac IOS, and LINUX.
  • just plug the adapter in terminals to the hard drive and USB port on the computer, There are no drivers required.
  • ▶Huge Capacity Supportive: Designed to be lightweight and compact. IDE hard drive adapter supports a hard drive capacity of Up to 6TB capacity. a enables access to 2 drives simultaneously, Tips: Some IDE hard drive is old, In order for yo....
Check Stock