Top Double Acting Cylinder Pneumatic

TAILONZ PNEUMATIC 32mm Bore 50mm Stroke Double-Rod Double-Acting Aluminum Pneumatic Air Cylinder TN32-50

  • 【Product Name】Double-Rod Double-Acting Air Cylinder.
  • 【Working Pressure:】0-1.0mpa | 0-145psi..
  • 【Material】Made of aluminum alloy and metal, thickened cylinder body, high quality sealing rod, imported grease..
  • 【About fittings】The air cylinder came with 4pcs 4mm (2Pcs) and 6mm (2Pcs) quick change hose fittings and the rod end fork to mount the cylinders,easy to install ,no need to purchase accessories separately..
Check Stock

8 Quart DC 12V Hydraulic Pump Power Supply Unit Pack Double Acting Dump Trailer Fit for Lift Unloading

  • Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
  • Double Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
  • Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Double-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
  • Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..
Check Stock

CGELE Pneumatic Air Cylinder SC 32 x 200mm PT 1/8, Bore: 1 1/4 inch（32mm）,Stroke:8 inch(200mm) Screwed Piston Rod Dual Action

  • ♥Material:Made of high precision aluminum alloy..
  • ♥Each package includes 1 pcs pneumatic air cylinder(SC32×200)，1 pcs Y-joint ,2 pcs PC4-01,pneumatic tubing 5 meter(4×2.5),1 pcs teflon tape..
  • ♥Product parameters:Port size: PT 1/8,piston rod size:M10X1.25,Bore: 1 1/4 inch(32mm), Stroke: 8 inch(200mm)..
  • ♥Feature:New aluminum alloy material, thickened cylinder, surface electroplating treatment, high strength, not deformed, not easy to corrosion, with fine double seal ring, good sealing, long time smooth not jamming not leak, wear-resistant dust..
  • ♥Widly application:Widely used in printing , semiconductor, automation control, robotics, etc..
Check Stock

Enerpac ZU4408PB Universal Electric Pump with VM43M Jog Valve Basic 115V and 8 L Usable Oil Capacity

  • Electric hydraulic pump with 115V motor for powering a double-acting hydraulic cylinder or tool.
  • Four-way, three-position valve to control direction of hydraulic fluid in double-acting system.
  • Flow rate of 60 cu. in. per minute at maximum operating pressure of 10,000 psi.
Check Stock

Pneumatic clamp, G18 pneumatic sealing clamp Easy to use Wide application for machining

  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
Check Stock

Pneumatic Clamp G1 8 Cylinder Pneumatic Hold Down Clamp Wide Application Easy to Use for Home Furniture

  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
Check Stock

Pneumatic Cylinder Clamp, Iron Easy to Operate Shorten Test Time Cylinder Pneumatic Hold Down Clamp G1/8 for Home Decoration

  • Iron Material: Pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • Wide Range of Uses: Widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
  • Ensure Machining Accuracy: Pneumatic clamp can reduce the labor of workers, help ensure workpiece machining accuracy..
  • Improve Production Efficiency: Cylinder Pneumatic hold down clamp can shorten test time and improve production efficiency..
  • Realize Automatic Control: Cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

Sydien 16mm Bore 300mm Stroke Pneumatic Air Cylinder Single Rod Double Action with Y Connector and 2Pcs Pneumatic Quick Fitting (MAL16x300)

  • Single Rod double action. For more parameters, please see the product detailed pages..
  • ✅Thickened cylinder body, high quality sealing rod, imported grease. The body of the cylinder is made of high-quality aluminum alloy with high strength, which is non-deformed, resistant to impact and abrasion..
  • ✅Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out. High quality dust ring to protect bearing. Oil-bearing bearing life is longer, better piston rod, tightness, suitable for long-term use..
  • ✅Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion. A unique sealing structure is adopted, the connection between two ends and the cylinder adopts a riveting process. Before shipping the goods to you, we will check to ensure that the cylinder seal is not leaking..
  • ✅Package Content: 1Pcs x MAL16 x 300 Mini Pneumatic Cylinder & 1Pcs x Y Connector & 2Pcs x Quick Fitting..
Check Stock

Sydien 1Pc Air Cylinder 32mm Bore 300mm Stroke Dual Acting Single Piston with Y Connector and 4Pcs Pneumatic Quick Fitting (MAL32X300)

  • Single Rod double action. For more parameters, please see the product detailed pages..
  • ✅Thickened cylinder body, high quality sealing rod, imported grease. The body of the cylinder is made of high-quality aluminum alloy with high strength, which is non-deformed, resistant to impact and abrasion..
  • ✅Two screw hole connections to get the air in and out, and a rod connected to the plunger that goes in and out. High quality dust ring to protect bearing. Oil-bearing bearing life is longer, better piston rod, tightness, suitable for long-term use..
  • ✅Cylinder is a mechanical devices which utilize the power of compressed gas to produce a force in a reciprocating linear motion. A unique sealing structure is adopted, the connection between two ends and the cylinder adopts a riveting process. Before shipping the goods to you, we will check to ensure that the cylinder seal is not leaking..
  • ✅Package Content: 1Pc MAL32 x 300 Mini Pneumatic Cylinder & 1Pcs x Y Connector & 4Pcs x Quick Fitting..
Check Stock

Pneumatic Clamp,Pneumatic Clamp G1/8 Professional Cylinder Pneumatic Hold Down Clamp HS 10101‑A GH101A for Home Decoration

  • 【Improve Production Efficiency】The cylinder pneumatic hold down clamp can shorten test time and improve production efficiency..
  • 【Realize Automatic Control】Our cylinder pneumatic hold down clamp is easy to operate and easy to implement automatic control..
  • 【Iron Material】This pneumatic clamp is made of high quality iron material, sturdy, durable and, exquisite workmanship, beautiful appearance..
  • 【Ensure Machining Accuracy】This productt can reduce the labor of workers, help ensure workpiece machining accuracy..
  • 【Wide Range of Uses】It is widely used in home decoration, equipment installation, mechanical operation, welding, mold and other industries..
Check Stock

The ROP Shop | Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950

  • The ROP Shop replacement Hydraulic Cylinder 4x24 Bore x Stroke for Dirty Hand Tools 22 Ton 100171, 100950.
  • Specs - Bore: 4". Stroke: 24". Clevis Mounting Holes Diameter: 1 1/8". Chrome Rod Diameter: 1 3/4" with 9/16" Mounting Hole. Maximum Operating Pressure: 3500 PSI. Welded Design. Double Acting. Rebuildable. Refer to images 2 & 3 for more information.
  • for/fits many of the following brands of log splitters: Tractor Supply Co (TSC), CountyLine, Huskee, MTD, Oregon, SpeeCo & SplitMaster.
  • Please be sure to verify your specs and/or part/model number to ensure correct fitment. Note: this is a new hydraulic cylinder, but may have some spots where paint is chipped off.
Check Stock