Top Double Direction Valve

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

Enerpac ZU4408PB Universal Electric Pump with VM43M Jog Valve Basic 115V and 8 L Usable Oil Capacity

  • Electric hydraulic pump with 115V motor for powering a double-acting hydraulic cylinder or tool.
  • Four-way, three-position valve to control direction of hydraulic fluid in double-acting system.
  • Flow rate of 60 cu. in. per minute at maximum operating pressure of 10,000 psi.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

GASHER 3PCS 1/4 Inch Heavy Duty Brass Ball Valve Shut Off Switch 1/4 Inch Male x Female NPT Thread Pipe Fitting

  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • Red Plastic-covered lever handle for fast open or closed operation.
  • Designed for hydronic heating as well as potable lquid distribution. 150 PSI.
  • Inline valve for connecting two pipes going in the same direction with Double-seal system.
Check Stock

Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery with Silver air Pump

  • ...tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp.
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
  • Also it has quarter-turn, and the double-seal system allows flow to go in either direction, easy to operate and practical to use.
Check Stock

DuraChoice 2\ Brass Gate Valve - 200WOG, FxF NPT

  • Made of high quality brass material, this gate valve is sturdy and durable..
  • The internal fluid path of valve body is straight through which allows fluid to flow in a straight line and the flow resistance is small..
  • It's easier to open and close, because the movement direction of the gate is perpendicular to the flow direction, whether on or off..
  • It is suitable for water, oil, gas, steam, etc..
  • Widely used in mechanical equipment, chemical equipment, industrial equipment, water supply and drainage equipment, pharmaceutical equipment, petrochemical equipment, etc..
Check Stock

uxcell Pulse Solenoid Valve G1/2 DC3.6V Copper Male Thread Valves with Filter

  • This solenoid valve is basic automated components that electromagnetically control fluids..
  • Flow Direction: Unidirectional (Follow the Arrow on Valve Body).
  • Solenoid type magnetic field makes the valve reach higher pressure, which greatly improves the flow of the passed medium..
  • Replacement solenoid valve for induction fittings. Replace the bad work solenoid valve for machine..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Kitchen accessories steam release separator pressure cooker exhaust accessories

  • The ears of the steam diverter can be rotated 360 degrees, allowing you to adjust the direction of steam release to safely transfer the steam to any direction without having to enter the cabinet upwards. Excellent pressure cooler accessories can protect your cabinet from moisture and deformation..
  • Before cooking, just place the steam distributor on the valve. After cooking, rotate the accessory to release steam. After cooking, you can remove both ears and wash them with a dishwasher or hand sanitizer. reusable..
  • Our pressure relief valve accessories are useful kitchen accessories that you must have..
  • pecifically designed to safely divert steam to the side instead of up into your cabinets, our steam diverter keeps your kitchen mess free and clean. It prevents moisture that may harm or cause molds on your wooden cabinets..
  • Extremely easy to use, our steam diverter gets installed in seconds without any tools. Simply put it on the valve BEFORE you start cooking, with the lid attached, and once your recipe is complete, rotate it to release steam..
Check Stock

INTBUYING Dry Powder Mixer 100L Particle Blender Powder Mixing Machine Granual Mixer 110V 26.5Gal

  • 【Wide Application】The dry powder mainly used for mixing and stirring various powdery, granular, flake, lump and viscous materials in feed, chemical, metallurgical, food and other industries..
  • 【Well Mixed】The barrel and the inner mixing blade can rotate at the same time, and the rotation direction is opposite to achieve the purpose of more uniform mixing. The barrel can be turned over 360 degrees, and there is no dead corner when mixing..
  • 【Controllable Speed】The butterfly valve type discharge port is convenient for discharging and can control the speed of discharging. The butterfly valve rubber gasket has good sealing effect and does not leak..
  • 【Durable and Stable】Thickened stainless steel cylinder, anti-corrosion, long service life.
  • high-quality copper core motor, strong power, stable and durable..
  • Voltage:110V,2.2kw.Double chain design with thicker chain and sprocket.Size: 110CM*80CM*102CM(43.3”*31.5”*40.1”)..
Check Stock

NestBasics Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery kit Machine

  • ...tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp.
Check Stock