Top Double Ferrule Tube Fittings

uxcell Compression Tube Fitting, 1/2 NPT Male x Ф1/4\ Tube OD with Double Ferrules

  • 【1/2 NPT MALE x Ф6mm(1/4") TUBE OD】Tube OD : Ф6mm(1/4").
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock

uxcell Compression Tube Fitting, 3/8 NPT Male x Ф3/8\ Tube OD with Double Ferrules

  • 【3/8 NPT MALE x Ф9mm(3/8") TUBE OD】Tube OD : Ф9mm(3/8").
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock

uxcell Compression Tube Fitting, 1/8 NPT Male x Ф1/8 Tube OD with Double Ferrules

  • 【1/8 NPT MALE x Ф3mm(1/8") TUBE OD】Tube OD : Ф3mm(1/8").
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

flowmavin 1.5 inches Tri Clamp Tee 3 Way Sanitary Fitting Stainless Steel 304 Mirror Polished, 38mm Pipe OD.

  • Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Fit for all other homebrew stuff sanitary fittings..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...orcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing..
  • ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.
Check Stock

Jienk 40PCS Straight Push Connectors, Quick Release Pneumatic Air Line Fittings for 1/4 5/16 3/8 1/2 Tube Emergency Repair Your Leaking Air Hose

  • 【Durable】This fitting has a strong PBT housing with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】 Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily..
  • 【Wildly Application】 Working Temperature: 32~140°F. This Straight Push Connectors kit is most commonly used in the field for low-pressure hydraulic and pneumatic systems such as general industrial maintenance and automotive assembly,as well as moving parts such as air brake, air compressor and air ride..
  • 【Flexibility】This combo concluded four different sizes of straight air line fittings(1/4,5/16,3/8,1/2), save you from varies emergency need, help you to repair your leaking air line..
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...rcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing..
  • ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...orcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing..
  • ✅[QUALITY AFTER-SALE SERVICE] If you do not satisfy with our products or if you have any questions, please come to us for help. We would work out a satisfactory solution to your problem. 12 hours response service!.
Check Stock

Keadic 180 Pcs 3 Size Brass Compression Fitting Ferrule Sleeve Tube OD 3/16\ 1/4\ 5/16 Brass Compression Fitting Set for Air, Water, Fuel, Oil Tubing (Imperial)

  • 【1/2 NPT MALE x Ф3/8 TUBE OD】Tube OD : Ф3/8.
  • 【DOUBLE FERRULE】This fitting has a double ferrule construction,reducing the possibility of leakage.
  • 【NO NEED TO WELD】It does not need to be welded when it is connected with steel pipe, which is conducive to fire prevention, explosion protection and high altitude operation, and can remove the drawbacks caused by inadvertent welding.
  • 【SAFE & DURABLE】Strong connection, strong pressure resistance, good sealing and repeatability, convenient installation and maintenance, safe and reliable operation.
  • 【REPEATABLE INSTALLATION】All joints can be re-installed, but to ensure that the parts are not damaged and clean.
Check Stock

Jienk 5PCS Pneumatic Male Straight 1/2\ Tube OD x 3/8\ NPT Thread Push to Connect Air Fittings, Quick Connector for Air Ride Air Horn Air Compressor

  • 【Durable】This fitting has nickel plated brass body with POM release button and zinc alloy ferrule. Operating Pressure: 0~145 Psi. High pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove, just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation, after installation, the tube direction can be changed easily. This fittings have hexagonal body allowing tightening with wrench, additionally can be screwed with Allen tool, which is especially convenient where there is limited access to installation place..
  • 【Wildly Application】 Working Temperature: 32~140°F. This male straight quick release air fitting is most used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, Industrial, Automotive Assembly, Printing, Packaging, Aircraft Controls, Textile. As well as moving parts such as cylinders, air bag and air suspension..
Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

  • 【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
  • 【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
  • 【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
  • 【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
  • 【Application】Working temperature range: 32~140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..
Check Stock