Top Double Flute End Mills

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.
Check Stock

Genmitsu 40pcs End Mills CNC Router Bits, 1/8\ Shank CNC Cutter Milling Carving Bit Set Including 2-Flute Flat Nose & Ball Nose End Mill, Nano Blue Coat & Titanium Coat CNC Bits, MC40A

  • ...gsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
  • 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
  • Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
  • Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..
Check Stock

RIP Cutting Tools 6-PC 4-Flute SE AlTiN HP Carbide End Mill Set, Sizes 1/8-1/2

  • Included Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2.
Check Stock

HQMaster Tapered Ball Nose End Mill 1/8 inch Shank Tungsten Carbide Cutter 3D Woodworking Tool CNC Router Bits D=1.0mm

  • SIZE: Ball Radius: 0.5mm (Cutting Diameter: 1.0mm), 1/8” shank, Flute Length: 15mm, Overall Length: 1-1/2".
  • TIALCN coating is a nano coating, which means it’s extremely hard, and can be used at high temperatures and still yield low friction. Package include: 5 pcs Tapered Ball Nose Carving End Mill.
  • Package include: 5 pcs Tapered Ball Nose Carving End Mill.
  • Fit for CNC, Engraving machine. Ideal for Plywood, hardwood, acrylic, 3D carving.
Check Stock

Accusize Industrial Tools 2-24'' by 0.001'' Resolution Inside Micrometer Set, 3011-5051

  • The combining of extension rods provides a wide measuring range. Supplied with a standard caliper gauge for zero setting..
  • Carbide measuring faces. Diameter of extension rods: φ15.5mm. Rod Diameter: 0.61".
  • Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum. Measuring length (mm) [Inch]. Resolution: 0.0001".
  • Each interchangeable rod is marked with its measuring range. Use to measure 3 flute cutting heads such as end mills, taps and reamers..
Check Stock

Niagara Cutter 17016418 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling and slotting.
Check Stock

RedLine Tools - 3/32 (.0938) Single End Corner Radius Carbide End Mill, Amorphous Diamond Coated Coated, 3 Flute .1390 LOC .0150 Radius, Round Shank Type, 2.5000 OAL - RET7934

  • 3 flute design for smoother/quieter milling operations High Performance ideal for pocketing steel, titanium and exotic alloys Ideal for long reach peripheral milling Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock

40Pcs End Mill Bits Set 1/8\ Shank, Mcwdoit CNC Router Bits Cutting Milling Tool Engraving Cutter Including Flat Nose/Ball Nose End Mill, Nano Blue Coat/Titanium Coat 2 Flute CNC Router Bits

  • 【High Quality】Mcwdoit 1/8 end mills are made of ultra-fine grain carbide material (tungsten steel), with great cutting and milling performance..
  • 【Cost-Effective Kit】4 Type Each 10Pcs, Ball Nose Bit 2-Flute, Flat Nose Spiral Bit 2-Flute, Nano Blue Coat and Titanium Coat CNC Router Bits, satisfying your different needs..
  • 【Advantage】Carbide rods and tungsten steel rods with high hardness, high wear resistance, clean surface, neat, no glitches..
  • 【Wide Application】PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, aluminum and other precision parts processing..
  • 【Parameter】Overall Length（OAL）: 38mm.
Check Stock

End Mill Bits 5Pcs 6mm Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 6mm/0.23".
  • [Single Flute End Mills]: 5 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

End Mill Bits 10 Pcs 1/8” Shank Single Flute End Mills Drill Bit Tool Tungsten Carbide CNC Router Milling Bits for Wood Aluminum Steel PCB PVC Circuit Boards Acrylic Carbon Fiber

  • [Specification]: Shank diameter 3.175mm 1/8”.
  • [Single Flute End Mills]: 10 Pcs end mill bits.
  • [ Cutting Edges]: The milling cutter has edges, it can milling holes, s and edges on plates smoothly.
  • Offer a smooth cutting surface and chip clearing.
  • [Premium Material]: These drill bits are made of premium tungsten carbide for good milling.
  • [Widely Application]: This carbide end mill is widely used for engraving such as PCB PVC MDF, circuit boards, Acrylic, carbon fiber and other soft materials.
Check Stock

Niagara Cutter - SPB540-0.500-D2-B.3-Z4 17012957 Cobalt Steel Ball Nose End Mill, Weldon Shank, TiCN Finish, Roughing and Finishing Cutting, 30-Degree, 4-Flute, 3' OAL, 0.500' Cut Diameter, 0.500' Shank Diameter

  • 4 Flute design for creating finer finishes and creating a higher metal removal rate.
  • General purpose end mill for working on all types of materials and high temperature alloys.
  • Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
  • Titanium Carbonitride(TiCN) allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3 to 5 times that of uncoated tools.
  • Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, contour and slotting.
Check Stock

Niagara Cutter - CM490-0.250-D1-C.0-Z4 17004752 Carbide Chamfering Mill TiAlN Coated 4 Flutes 90 Degree Chamfer End 1/8 Cut Cutting Length 1/4 Diameter

  • 4 flute design for creating finer finishes and a highter metal removal rate Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer Titanium Aluminum Nitride (TiAlN), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.
Check Stock