Top Double Shaft Milling

Face Mill Cutter Holder EMRW 6R 50-22+R8-FMB22-7/16+RPMT1204 Hard Alloy Blade+8mm Spanner+T15 Spanner Used for Fough Machining of The Workpiece on The Milling Machine EMRW 6R50-22 1.96 Inch

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

Mega Mini R8 Milling Machine, the only True Inch machine on the market, .50 inch-per-turn table feed screw, a powerful brushless 500W motor

  • X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs..
  • Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions..
  • High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well..
  • Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop..
  • Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc..
Check Stock

DOWAL X20 Golf Putters for Men Right Handed,100% Milling Face, Easy Aligned Steel Mens Putter with Headcover

  • PRECISION MILLED FACE - 100% CNC Milling Face for More Consistent Speed Control and Distance Performance..
  • Larger Center Putt - A unique Diamond CNC Milling Parttern at Center to Increase the Putt Control..
  • Easy Align and Accurate Putt by Duble Alignments on Putter Top!.
  • Waterproof Magnetic Putter Headcover For Free to Protect Your Golf Putter.
  • 360g Weighted SUS303 Putter Head with Stainless Steel Shaft and Soft Grip for You to Play The Best Putt..
Check Stock

DOWAL X20 Golf Putters for Men Right Handed,100% Milling Face, Easy Aligned Steel Mens Putter with Headcover

  • PRECISION MILLED FACE - 100% CNC Milling Face for More Consistent Speed Control and Distance Performance..
  • Larger Center Putt - A unique Diamond CNC Milling Parttern at Center to Increase the Putt Control..
  • Easy Align and Accurate Putt by Duble Alignments on Putter Top!.
  • Waterproof Magnetic Putter Headcover For Free to Protect Your Golf Putter..
  • 360g Weighted SUS303 Putter Head with Stainless Steel Shaft and Soft Grip for You to Play The Best Putt..
Check Stock

Milling Bronze Gear,Power Feed Bronze Gear Bridgeport for Bridgeport Milling Machine

  • 【BASIC PARAMETERS】GPOAS X-Axis power feed is made of aluminuml.
  • Power Parameter:90Watt,110V input voltage,50/60Hz,single phase.
  • Rotate Speed:0-200 RPM.Max Torque:450in-lb.
  • Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc....
  • 【PORTABLE AND EASY TO INSTALL】This power feed for milling machine is compact and portable.Weight: 3.75kg/8.27lbs, Size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator, it is very easy to install this power feed according to the instruction and online video or by yourself.After-sales:You will get worry-free 18-month warranty and lifelong technical guidance..
  • 【STABLE AND EFFICIENT】This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio,low transmission noise,high transmission efficiency and high bearing capacity.And when fast transmission, if the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage..
  • 【AUTOMATIC AND MANUAL CONTROL】You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting....
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

uxcell 4-inch Diameter Plastic Round Hand Wheel W Revolving Handle

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

YXQ 4.9 inch Dia Hand Wheel with Revolving Handle 3 Spoked, 12mm Center Hole Diameter

  • Plastic Material: This lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • Standard Size: These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • Easy Installation: The hand wheel comes with screw hole for easy handle assembly..
  • Mainly Used: These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • Wide Application: These hand wheels are widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

4" Cross Slide Drill Press Vise, Heavy Duty Cast Iron Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining.
  • 【Heavy Duty Construction】: Constructed of heavy duty cast iron, ensures high hardness and durability, hardened steel jaws on the cross slide milling vice holder add for extra durability and longevity.
  • 【Double Direction Design】: Features with double direction design, can move in horizontal and longitudinal for precise positioning, removable handle of the milling vice clamping machine for easy slide on and off.
  • 【Easy to Use】: There are several mounting holes on the bottom of drill press vice for convenient fastening firmly in position, provide great stability and easy to use.
  • 【Versatile Milling Vice Holder】: Hinged vise crank handles drops out of the way, designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc.
Check Stock

XXIO 2020 Women Eleven Half Mallet Putter RH 33

  • Odyssey White Hot OG Putters feature the original White Hot formulation, feel, sound and performance in one exceptional two-part urethane insert..
  • This classic name is synonymous with legendary performance and the unique design properties that Tour players and golfers love..
  • Odyssey engineers have combined a rich silver PVD finish with fine milling on the surfaces..
  • Available in a premium stepless steel shaft or our Tour proven, multi-material Stroke Lab shaft in a new candy apple red..
  • Both of these stock options are precisely fitted with a gray DFX Rubber Grip for a classic look and feel..
Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

  • DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
  • Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
  • High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
  • Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
  • Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check Stock

Odyssey Golf 2022 Women's White Hot OG Putter (2 Ball, Right Hand, 32\ Shaft, Steel Shaft, Pistol Grip)

  • The original White Hot formulation, feel, sound and performance are all back in one exceptional two-part urethane insert. Tour players and golfers alike have been asking us to re-introduce it for years, and we’ve listened..
  • Our engineers have combined a rich silver PVD finish with fine milling on the surfaces. These ultra-premium offerings are unlike anything you’ve ever seen from a White Hot..
  • Available in a premium stepped steel shaft or our Tour proven, multi-material Stroke Lab shaft in our stunning red colorway. Both shaft options are precisely fitted with our standard pistol grip for a classic look and feel..
Check Stock