Top Double Sheave Block

Garage Door Lift Cable 3/32 (for 8)

  • 4" Heavy Duty Sheave Pulley - 4" Garage Door Pulley Sheave - 4" Riveted Sheave - Zinc Plated.
  • Use on Residential Doors/ Light Commercial.
Check Stock

CURRENT TOOLS 406 Hook Type Sheaves - 6\ Diameter Heavy Duty Cable Guide with Welded Steel Frame & 4 000 LB Capacity

  • RUGGED DURABLE CONSTRUCTION - Built with high strength American steel this 6" welded frame hook type sheave is designed to withstand the toughest jobsite conditions.
  • 4000 LB CAPACITY - This sheave boasts a 4 000-pound cable pulling capacity to handle large jobs with ease.
  • SELF-LUBRICATED BEARINGS - The 5” wide aluminum sheave comes with self-lubricated bearings for efficient use for years to come.
  • LIGHTWEIGHT - Weighing just 11 5 lbs this lightweight hook type sheave is easy to transport and maneuver around the job site.
  • MADE IN THE USA - This Current Tools product is 100% designed and manufactured in the United States of America.
Check Stock

Caltric compatible with Complete Primary Drive Clutch Polaris RZR 570 2013 2014 2015 2016 (EBS Type) 1323058

  • Complete Primary Sliding, Fixed Sheave and Belt.
  • Order Includes: 1x Complete Primary Sliding Sheave, 1x Fixed Sheave, 1x Belt.
  • We strongly suggest comparing the posted picture to the unit(s) that needs to be replaced..
Check Stock

Mytee Products Snatch Block with Hook WLL 2 Ton 3 Sheave 3/8 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 8 Ton 6 Sheave 3/4 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

National Hardware N220-012 3213BC Fixed Single Pulley in Zinc plated

  • Swivel eye has the mobility of 360 degrees allowing for change in direction.
  • Made out of steel making it strong, durable, waterproof, and resistant to temperature changes, corrosion, and rust.
  • Used in both indoor and outdoor applications for tent tightening, rope or industrial lifting, and many other uses.
  • Measurements include sheave height of 1 inch, sheave height of 3/4 inches, and sheave height of 1 1/2 inches.
Check Stock

Johnson Level & Tool 40-6200 Magnetic Sheave Alignment Laser, Red, 1 Laser

  • DECREASED VIBRATION: This Johnson Magnetic Sheave Laser is designed to offer a high accuracy level ranging from +/- 1/6 in. to 10 ft. It is made to decrease vibrations on pulleys and sheave systems, helping minimize wear on belts and motor bearings..
  • SECURE FITTING: The alignment level tool features rare earth magnets that ensure a secure attachment to ferrous metals, allowing quicker and safer set up. The strong magnets offer accurate alignment for reduced noise and abrasion..
  • COMPACT SIZE: Featuring three laser targets, the magnetic aligning tool easily adjusts to various width sheaves for versatility. The compact size of the tool also makes it easy to use on sheaves with a small diameter..
  • APPLICATION: This sheave laser has a red laser wavelength of 635nm+/-10nm to quickly check height and flatness of gear box and motor mounting plates. It is also suitable for various alignment jobs on sprockets, rollers and other plant equipment..
  • PRODUCT SPECIFICATIONS: This Red Sheave Alignment Kit is powered by 2 "AAA" alkaline batteries (included) and has a battery life of up to 10 hours. It comes packed in a hard case for protection and easy carrying..
Check Stock

Mytee Products Snatch Block with Hook WLL 4 Ton 4 1/2\ Sheave 1/2 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing

  • 40kN Micro Double Pulley with Swing Plates from GM CLIMBING for you to easily set up most pulley systems while largely lighten your rack. Light, compact, and durable, compatible with rope up to 12mm, CE and UIAA certified. Super power double pulley for you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a ....
Check Stock

Mytee Products 4 Ton 4.5" Snatch Block w/Swivel Shackle and 30" Chain (3/8 G100) Flatbed Tow Truck Rollback Wrecker Car Carrier Cable

  • End Fitting: 2.5 ft.t G100 5/16 Chain Anchor.
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing (Pack of 2)

  • 40kN Micro Double Pulley with Swing Plates from GM CLIMBING for you to easily set up most pulley systems while largely lighten your rack. Light, compact, and durable, compatible with rope up to 12mm, CE and UIAA certified. Super power double pulley for you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm....
Check Stock

HI-GEAR Wire Rope Pulley Block 3 Ton 6,600 LBS Working Capacity Swivel Eye Hoist Hook Snatch Block Anodized with Hook Compatible Rope Size Up to 7/16 .

  • ROPE SIZE: The block and tally pulley system is 1.70" (43 mm) of Sheave Diameter. Hook Opening is 3/4'' (19mm). Accepts Cable, Wire and Rope size up to 7/16''..
  • MAXIMUM WEIGHT: 3 Ton (6,600 lbs) Working Load Limit.
  • FUNCTIONALITY: Increase the pulling power of your winch with a swiveling feature from the Snatch block.
  • USES: Heavy Duty All Metal Construction. The small pully system will allow you re-direct the force of your item to mobilize your item in an easy and effortless way..
  • FEATURES: The pully system contains an Anodized Steel Hook, Swivel, Housing & Bushing..
Check Stock