Top Double Side Pcb

Ducky One 2 Mini RGB LED 60% Double Shot PBT Mechanical Keyboard (Cherry MX Red)

  • Featuing PBT double shot seamless keycaps with side laser engraving technique. Smaller size, but no functions sacrificed. Supports Ducky Macro V2.0 and Mouse control function. The new bezel design shares a similar sleek frame as it's predecessor, but the One 2 Mini incorporates dual colors on the bezel to match all varieties of keycap colorways..
  • To stand out in the crowd we chose to use PBT seamless double-shot keycaps. It is designed and engineered in a way to provide the user with the best durability and typing experience. Varieties of colorways available..
  • The One 2 can be adjusted into three placement angles, optimizing typing comfortability and legend visibility..
  • Detachable USB Type-C cable provides convenience to users. We use USB HID with the highest frequency of 1000Hz polling rate, meaning the keyboard is sending its input signal(s) to your PC 1000 times per second. This feature minimizes the delay of when the keys are being pressed and signal received by the computer..
  • Brand new bezel design and Dual layer PCB,PBT double - shot seamless keycaps..
Check Stock

Soundstream AR1.2500D Arachnid Series 2500W Class D Monoblock Amplifier

  • 1-Ohm stable monoblock operation for Max power Bridge 2 monoblocks together for double power! Military grade PCB w/ PWM MOSFET power supply Direct....
  • Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
  • LED power (green) and protect (red) indicators.
Check Stock

Skyloong 64 GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

Portico II Master Buss Converter

  • [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
  • [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
  • [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
  • [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
  • [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..
Check Stock

Gikfun DIY SMD SMT Welding Practice Soldering Skill Training Board NE555 CD4017 Water Flowing Led DIY Kit EK1885

  • The circular circuit is the running water lamp circuit, which is composed of CD4017, NE555 and leds, which can be used to work after being welded..
  • Add 2pcs of QFP44 chip, double sided component layout, double welding..
  • High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully..
  • Please make sure all components in right direction and right place.
  • and check whether pseudo and float welding, this is very important in practicing....
Check Stock

Aquarium Light Retrofit Upgraded PCB Board Reef Spectrum 2 Channels Replacement for 16" 165W Saltwater Black Box SB Reef Light,VIPARSPECTRA,Mars Aqua,GalaxyHydro,Evergrow

  • Upgrade your black box to the better reef lights proprietary layout and spectrum.
  • Fits 16“x8" Square Black Boxes with round corners (Reference our models) May require swapping of wire clips. Comes with standard Molex 2 pole connector..
  • Fits most of black box with case modification and new glass panel,double check side before placing order.
  • The PCB Board is 2 channels,not 3 channels,please double check before you replace old one.
  • It comes with optic lens,one channel has 27 led diodes, another channel has 28 led diodes,very perfectly fit in most of blackbox reef light 16" 165w.
Check Stock

Soundstream AR1.4500D Arachnid Series 4500W Class D Monoblock Amplifier

  • 1-Ohm stable monoblock operation for Max power Bridge 2 monoblocks together for double power! Military grade PCB w/ PWM MOSFET power supply Direct short, thermal, & overload circuit protection High/speaker level & low level/RCA input.
  • Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
  • LED power (green) and protect (red) indicators.
Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

SFB-7900D - Sundown Audio Monoblock Class-D Amplifier

  • Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.
Check Stock

HUANRUOBAIHUO 5.8GHz 9.4dBi Triple Feed Patch Antenna SMA Directional Circularl with Connectors for FPV Racing RC Drone Quadcopters Accessories

  • High Transmission Efficiency: The center frequency of the antenna is 5.8GHz, the signal transmission is better, and the radiation efficiency is....
  • PCB Double Panel: The antenna is made of PCB, 1.6mm thick double panel, and the whole process is sprayed with tin to ensure good passing performance....
  • Good Axial Ratio: The antenna has a good axial ratio, not only directly perpendicular to the patch, but also off-center..
  • Easy to Use: The antenna is easy to manufacture and has high precision, even for amateurs..
  • Professional Application: This is a pagoda antenna suitable for drones and goggles..
Check Stock

3Pcs Portable Waterproof Ink Electronics CCL Anti-Etching PCB Circuit Board Ink Marker Double Pen for DIY PCB Marker Pen

  • 3Pcs Portable Waterproof Ink Electronics CCL Anti-etching PCB Circuit Board Ink Marker Double Pen For DIY PCB Marker Pen.
Check Stock

DIERYA DK63N 60% Wireless Wired Mechanical Gaming Keyboard, RGB Backlit Bluetooth Keyboard w/Arrow Keys, 63 Keys Ultra-Compact Keyboard Full Keys Programmable w/Brown Switch for Windows Laptop PC Mac

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock