Top Double Socket 90 Bends

Klutch Rebar Cutter and Bender

• Mounts easily on most flat surfaces to enhance leverage and increase safety.

30' Steel Bending Brake Sheet Metal Bender Tool

Combo Exhaust Pipe Mandrel Bend/Header Tubing, 2-1/2' Inch, Pair

• Premium heavy-duty steel construction for consistent performance and reliability.
• 16 gauge tubing (0.06" thick), 2-1/2" O.D..
• Combo exhaust bends for building or repairing headers.
• Features 90-degree & 180-degree mandrel bends.
• Includes two exhaust pipes that are easy to install.

Uniweld RTB118 Crossbow Ratchet Tube Bender silver

• Enables the plumber & HVAC/R technician to create precision bends up to 90 Degree of soft copper and aluminum tubing.
• Low friction mandrels and rotating side support blacks provide precision bending in restricted spaces.
• Capable of bending 3/8in, 1/2in, 5/8in, 3/4in, 7/8in, 1 1/8in tubing O.D.
• Provides minimum distortion bends for optimal flow.

BODLYL 2.36 inch Stove Pipe, 2 Pcs 45 and 90 Degree Chimney Stainless Steel Flue for Outdoor Camping Wood Stove, Camping Stove Accessories, Diameter 6cm (45°+90°)

• Multiple Use Scenarios: BODLYL stainless steel stove pipe is suitable for outdoor camping wood stove chimney, hot tent with stove jack, RV or indoor water heater pipe. 45 and 90 degree bends can be used in places where space is tight or where bends are needed..
• High Quality Material: Made of sturdy stainless steel material with good heat resistance, very strong and not easy to rust. Suitable for use in harsh conditions..
• High Precision Processing: Made by high precision machine, it is tightly connected with other pipes of the same diameter without air leakage. Sharp and precise cutting technology (pay attention to the connection interface when using). Be careful not to deform the stove pipe by compression..
• Package and Size: Includes two pieces of bends (one each at 45° + 90°) with a diameter of 2.36inch/6cm and a thickness of 0.3mm..
• Quality Service: Please contact us if you have any questions, we will answer all your questions within 12 hours, bringing you a good shopping experience is our aim..

JY Performance 3” Custom Exhaust Kit 16 Pieces (2 BOX) Mild Steel Tubing Mandrel Bend Pipe Straight & U-Bend Universal 3 Inch OD

• 3 Inch Mild Steel 16 Gauge Piping Includes 4 X 45° Bends, 4 X 90° Bends, 4 X 180° Bends and 4 X 47.3 Inch Straight Pipe..
• Each Piece Mandrel Bent Pipe Is Expanded On One End To Allow Easy Slip-on Installation.
• Universal Kit Includes Allow you to make your own Stainless Steel Exhaust System.
• WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..

Capri Tools Tube Bender, 1/8, 3/16 and 1/4 in. (CP21105)

• Easily make tight bends on round small-diameter copper, brass, and aluminum tubing.
• Use with tubing with 1/8, 3/16, and 1/4 in. outer diameter.
• Bend tubing from 0-120 degrees. Reference marks at 45 and 90 degrees for accurate bends.
• Compact design lets you work easily in tight spots.

Gardner Bender B1000PT PORTABLE CYCLONE AND POWER DRIVER KIT

• Precise, repeatable bends for early stage apprentices. Takes the guess work out of bend angles..
• Attaches to almost any pipe threader to use as a bending power source.
• Save time on the job site - More efficient than using a hand bender. Makes a 90° bend in less than 10 seconds.

Flowmaster 15902 3in Universal Tailpipe Kit

• This Universal Custom Exhaust Kit Made of High Quality T304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability, 18-Gauge Piping Walls.
• 18-Gauge Piping Walls Of This Custom Exhaust Kit.
• 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
• Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
• WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..

DIY Water Cooling PETG Hard Tube Bending Kit for 16mm OD Rigid Tubing Hose

• DIY bending tools for 16mm OD PETG rigid tubings / hose..
• Includes Mandrels for 45/90/180 degree bends.
• Silicone rod insert prevents kinks and to help promoting smooth bends while keeping inner wall diameter.
• Recommended to use soapy water assists with tube insertion and tube heating..
• Pre-drilled holes allow easy mounting of mandrels to flat surface.

3'' Mild Steel Custom Exhaust Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal 8PCS

• This Universal Custom Exhaust Kit Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls.
• 16-Gauge Piping Walls Of This Custom Exhaust Kit.
• 2 X 48″ Straight Pipes, 2 X 90 Degree Pipes, 2 X 45 Degree Pipes, 2 X 180 Degree U-Bends, Detail Dimensions Please See Pictures..
• Each 3″ Smooth Mandrel Bent Tube Is Expanded On One End To Allow Easy Slip-fit Installation.
• WE ARE DIRECT MANUFACTURER, SO WE GOT THE LOWEST PRICE AND BEST QUALITY..

Mid Valley - 3'OD DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-bend Kit Set of 16

• These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation..
• Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
• Package Included 4 x 48″ Straight Pipes 4 x 90 Degree Pipes 4 x 45 Degree Pipes 4 x 180 Degree U-Bends As our pics shown.