Top Double Threaded Shank

50 Pack 10-24 Self-Clinching Nuts Press-in Sheet Metal Fasteners SS-024-2ZI

  • A round, internally threaded, one-piece fastener with a shank protruding from the internal circumference, and a knurled clinching ring surrounding the shank..
  • Both the shank and the clinching ring are integrally formed into the bottom side of the nut..
Check Stock

WHYHKJ 2pcs Kitchen Sink Hole Cover Faucet Hole Cover Kitchen Sink Tap Hole Plate Stopper Cover Kitchen Bathroom Supplies Faucet Accessories

  • Leak-proof cover: the hole cover of plastic sink faucet soap liquid device is decoration and leakage prevention, keep the kitchen clean and tidy, preventing water from leaking onto the floor, a useful kitchen accessory..
  • Easy to install: longer threaded shank designed to screw into place for a quick and easy installation, easy to install with no tools required.
  • The silicone holds it firmly in place, no need to worry about it getting loose..
  • Plastic material: filled the hole in the granite, plastic quality provides long lasting performance in your kitchen sink with your kitchen fixtures, not a heavy metal but it works as..
  • Reasonable dimensions: 1.6-inch long shank, 2 inch cover diameter, 1/2 inch threaded diameter designed, suitable for the hole 0.6-1.4 inches.
  • The threaded part is plenty long enough for granite counters, weightless, only 13g a piece..
  • Good quality: the cover is made of ABS plastic, what under the cover are made of PP, hard to be broken.
  • Bright surface with wire drawing, smooth, simple but pleasing shape.
Check Stock

Te-Co, 60303, Dbl THD Stud, M8x1.25x80mm OAL, PK2

  • Price For: Each System of Measurement: Metric Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: M8 x 1.25 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Overall Length: 110mm Workable Length: 79mm Thread Length (B): 31mm.
  • Thread Length (A): 31mm Thread Length Type: Equal Country of Origin (subject to change): United States.
Check Stock

Northwestern Tools Inc SUS-15 Steel Equal-Thread Length Setup Stud 1/2-13 Thd., 5 Inch Overall lgth. (L)

  • Price For: Each System of Measurement: Inch Rockwell Hardness: C27 Finish: Plain Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: 5/16"-18 Material: 18-8 Stainless Steel Item: Double End Threaded Stud Thread Length Type: Equal Min. Tensile Strength (PSI): 100, 000 Class: 2A Workable Length: 2" Thread Length (B): 1".
  • Thread Length (A): 1" Overall Length: 3" Country of Origin (subject to change): United States.
Check Stock

Tapmatic - 25037 1/2\ Straight Shank Arbor with Threaded Mount, 3/8\-24 Thread

  • Straight shank arbor with threaded mount.
Check Stock

BOSCH SF2561 2-9/16 In. Self-Feed Drill Bit

  • 7/16 In. hex shank for reduced slippage (3 In. and larger three-flat shank).
  • Chip lifters and spurs can be re-sharpened to maximize bit life.
  • Deep cutter gullets prevent stalling and provide smoother drilling.
  • Replaceable threaded tip and hex key included.
Check Stock

BOSCH SF3001 3 In. Self-Feed Drill Bit

  • 7/16 In. hex shank for reduced slippage (3 In. and larger three-flat shank).
  • Chip lifters and spurs can be re-sharpened to maximize bit life.
  • Deep cutter gullets prevent stalling and provide smoother drilling.
  • Replaceable threaded tip and hex key included.
Check Stock

Northwestern Tools Inc SUS-70 Steel Equal-Thread Length Setup Stud 1/4-20 Thd., 3 Inch Overall lgth. (L)

  • Price For: Each System of Measurement: Inch Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: 5/16"-18 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Thread Size: 5/16"-18 Overall Length: 5" Thread Length (A): 1-3/4" Thread Length (B): 1/2".
  • Thread Length Type: Unequal Workable Length: 3-1/4" Country of Origin (subject to change): United States.
Check Stock

Northwestern Tools Inc SUS-12 Steel Equal-Thread Length Setup Stud 3/8-16 Thd., 8 Inch Overall lgth. (L)

  • Price For: Each System of Measurement: Metric Rockwell Hardness: C27 Finish: Black Oxide Shank Type: Round Thread Type: UNC Thread Direction: Right Hand Thread Size: M8 x 1.25 Material: Steel Item: Double End Threaded Stud Min. Tensile Strength (PSI): 125, 000 Class: 2A Thread Length (A): 35mm Thread Length Type: Equal Overall Length: 140mm.
  • Workable Length: 105mm Thread Length (B): 35mm Country of Origin (subject to change): United States.
Check Stock

Danco 89478 DANCO Rust Resistant Sink Hole Cover, 1-3/4\

  • DISCREETLY COVER SINK HOLES - Brushed Nickel finish provides stylish look to the sink plug in order to hide extra kitchen sink holes.
  • RUST RESISTANT - Easy to install with no tools required, rust resistant quality provides long lasting performance in your kitchen sink with your kitchen fixtures.
  • EXTRA DEFENSE - Removed post style basket with kitchen sink hole cover catches unwanted debris.
  • DIMENSIONS: 3-inch long shank x 1-3/4 inch outer diameter flange. Threaded 1/2 inch shank design..
  • STYLISH DESIGN: Smooth flange cover in a brushed nickel finish provides an aesthetic that will match your current kitchen appliances.
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

Disston 1 1/2' Threaded Spade Bit 10X Faster than standard spade bit, 6' long, E0102691

  • Blu-Mol Xtreme Threaded Spade Bits 10X Faster than the standard spade bit.
  • Threaded Tip for fast effortless drilling and twin spurs for cleaner holes.
  • Coating that prevents rust and extends the life.
  • Hex shank for Quick Change and no slipping.
Check Stock