Top Draft Faucet Lock

Kegco EBSHCK-5T Kegerator Kit, 1 Faucet with Tank, Standard

  • ... tapping of ball lock Cornelius Pepsi kegs. The gas in comes with a 1/4" nut and 5/16" hose barb already attached, allowing you to quickly connect it to the same size air line that standard draft beer regulators use. The beer out connector has a 3/16" hose barb that connects to standard 3/16" beer line..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES EMPTY 5 LB. ALUMINUM CO2 TANK: All of our brand new tanks are made from high strength aluminum alloy which is not as heavy as a steel tank and will not rust. These eye-catching tanks have a glossy red coating that acts as an extra layer of protection against corrosion and w....
Check Stock

Dual Beer Tower Dispenser – Draft Kegerator Tower Beer Dispenser Kit with 2 Faucet Tap Handles & Caps, Hose, Keg Wrench

  • DOUBLE YOUR POURING POWER: Limiting yourself and your guests to pouring one beer on tap at your in-home bar is time consuming and frustrating.
  • The G. Francis Double Tap Draft Beer Tower is a beer faucets accessory that will double your pouring power and give your bar the finished feel you have been longing for.
  • USE YOUR EQUIPMENT: Inside lined with foam sheet for cooled tower systems insulation.
  • Tower stands 13.25 inches (33.7cm) tall (not including 3.1-inch/7.9cm tall tap handles) and has a 3-inch (7.6cm) diameter and 4.5-inch (11.4cm) base diameter.
  • 2.75-inch (7cm) center-to-center mounting hole distance (fits standard 3-inch/7.6cm hole pattern).
  • Includes 2 separate 5-foot (1.5m) lengths of 3/16-inch (4mm) inside diameter (ID) (7/16-inch / 11mm OD) clear beer tubing with a 4.5-foot (1.4m) reach.
  • BUILT TO LAST: Constructed from polished silver stainless steel hardware and components, hard plastic faucet knob tap handles, and soft rubber faucet cap sanitary covers for maximum strength and longevity that resists rust and corrosion while preventing scratches and other damage.
  • Transparent hose is FDA approved 21CFR 175.300 PVC.
  • KEEP OUT CONTAMINANTS: Black faucet cap sanitary covers are the most simple and effective way to keep the faucets clean and are....
Check Stock

BACOENG Standard Tower Kegerator No Tank Beer Conversion Kit

  • ...em Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful Standard-plated metal finish and a matching Standard-plated faucet with metal lever, this 3" diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4" length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow dir....
Check Stock

HLYCare Stainless Steel Double Taps Beer Tower for Brewing Beer Keg,3'Diameter Kegerator Tower Dispenser with 2 Faucets,Hose,Tap Handles,Keg Wrench,Cleaning Towel,Kegerator Accessories-Lovers Gifts

  • √ Advantage -HLYCare Double Tap Draft Beer Tower is a beer faucets accessory .The inside of the tower is lined with a thin styrofoam sheet to help with insulation for fizzics draft beer system. Double faucets allows you to serve up to 2 different beers, a simple and economical solution for nitro cold brew in your home and bar . Enjoy the beer time with your friend!.
  • √ Durable Quality - Double Taps Draft Beer Tower made in durable mirror polished stainless steel in beer tower body, with BPA free stainless steel construction, safe!.
  • Chrome plated brass taps with straight shaft and polished interior, standard to the commercial beer industry.
  • PVC transparent hose is safe for beverages, compact and sturdy, never rusted!.
  • √ Easy to Install with Video: Include Multi-purpose keg faucet wrench tower gasket, mounting hardware bolts, beer tower assemble video,and cleaning towel for your convenience. Comes with every accessories you need! Tips: Keg couplers required, not included ..
  • √ Wide application -Double faucets beer tower can be used in standard kegerator, home juice/margarita/beer brewing system and great install on counter top, keezer, bar.Double Taps Draft Beer Tower are Great beer gifts for lover!.
  • √ Packing Inclued - This beer faucet accessorie....
Check Stock

Kegco Standard Tower Kegerator Conversion Kit no Tank - STCK-NT

  • ...th all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • SINGLE FAUCET DRAFT BEER TOWER: Featuring a beautiful chrome-plated metal finish and a matching chrome-plated faucet with metal lever, this 3″ diameter air-cooled Kegco D4743T draft beer tower is the same stylish tower used on most commercial grade kegerators. This tower conveniently includes 5 feet of clear beer tubing ending in a nozzle and hex nut assembly for quick connection to all standard keg couplers, as well as a gasket and for screws for easy mounting..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense components you’ll need to quick....
Check Stock

Nitrogen Draft Beer Faucet - Steel Keg Faucet and Plastic Keg Tap Handle for Stout Beer and Nitro Coffee

  • [Achieve a Smoother and Creamier Flavor] Create a beautiful cascading effect and a smooth, rich body with the G. Francis Nitrogen Draft Beer Spout and....
  • [Narrow Stout Faucet for the Perfect Pour] Restriction plate and narrow faucet spout ensure a slower, smoother pour to intentionally agitate the beer....
  • [Works with Standard Shanks and Beers Towers] 7-inch (17.8cm) beer tap spout keg faucet has a 1-1/8 inch - 18 thread to fit your beer towers and taps.
  • [Stainless Steel Construction] Unlike brass and chrome-plated beer faucets, these stainless steel keg spouts are safe as they resist wear from acidic....
  • [Package Contents] Each kegerator parts nitrogen tap system includes a stainless steel creamer faucet draft beer dispenser and a 2 by 1.3-inch (5 x....
Check Stock

Kegco Standard Double Faucet Tower Kegerator Conversion Kit No Tank - STCK2-542-2_NT

  • ...with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DUAL FAUCET DRAFT BEER TOWER: This 3″ diameter air-cooled chrome-plated metal draft beer tower comes complete with two NSF-approved chrome-plated metal faucets with brass levers and two black ABS plastic faucet knobs. Two 5′ lengths of 3/16″ I.D. beer line extend from the bottom of the tower. These thermoplastic vinyl beer hoses remain flexible and durable at recommended temperatures and pressures, are unaffected by normal cleaning compounds, and will not rot, swell, or dry out..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and a convenient 5-1/4″ length..
  • INCLUDES DETAILED INSTRUCTIONS: This kegerator conversion kit comes with easy-to-follow directions and all of the high-quality draft dispense compon....
Check Stock

Kegco 3PHBK309B-2 Keg Dispenser, 2 Tap, Black

  • Kegco 3PHBK309B-2 Homebrew Kegerator comes complete with a stainless steel two faucet draft tower, two set of ball lock keg couplers, a two product dual gauge CO2 regulator, and an empty CO2 tank.
  • Large interior easily holds up to three home brew kegs and can also be used as a fermentation chamber or an all-refrigerator.
  • Digital temperature control and fan-forced cooling provides one of the largest temperature ranges on the market (32 to 75 degrees Fahrenheit).
  • Kegerator also features a chrome guard rail, easy-roll locking casters, and dishwasher-safe removable built-in drip tray for easy clean-up.
  • PLEASE NOTE: This is a homebrew kegerator and includes ball lock keg couplers for home brew kegs.
  • it will not tap commercial D system kegs.
Check Stock

MRbrew Stout Beer Coffee Faucet, 304 Grade Stainless Steel Nitrogen Keg Draft Faucet, Homebrew Cold Brew Kegerator Beer Tower Tap with Standard Black Plastic Tap Handle

  • 【WHY MRbrew?FOOD GRADE SS304】Don't get fooled into buying a cheap chrome plated stout leaking faucet. You need all stainless steel components if you are serving coffee on draft due to the acidity of coffee. That’s why you need the MRbrew Nitro Stout Beer Faucet in 304SS.
  • 【EXCELLENT POURING&CREAMER DESIGN】The stout faucet features a pull forward to pour and push back for creamer design for perfect nitro pour. This is the Faucet you need to pour the perfect Nitrogen Stout. Pour your Guinness and Stouts like they should be with a true Stout Faucet!.
  • 【PERFECT APPLICABILITY】For dispensing Guinness, Murphy’s, Beamish and other nitrogen beers, If you order this faucet and decide to serve traditional style beers in the future, that’s no problem. You can easily remove the restrictor disc inside and attach a CO2 gas setup and this item is compatible with standard shanks and beers towers.
  • 【EASY TO GET THICK CREAMY HEAD】Unlike traditional-style draft beers that use CO2, stouts require nitrogen or mixed gas to achieve the smooth taste and creamy flavor. The body of the Nitro Stout Beer Faucet is narrower than normal beer faucets. This design, along with a special restrictor disc, powers the beer quickly through the faucet to create a thick, cre....
Check Stock

Kegco Deluxe Tower Kegerator Conversion Kit - No CO2 Tank - DTCK-542_NT

  • ...s constructed from 100% stainless steel and has an attractive brushed finish that will look great on any kegerator. It is dishwasher safe and features a detachable grill for easy cleaning. Because it does not come with a drain, this drip tray is perfect for use where running a drain would be difficult..
  • SINGLE FAUCET STAINLESS STEEL DRAFT BEER TOWER: Popular for outdoor or commercial applications, this top-of-the-line NSF approved 3″ diameter draft beer tower has a beautiful polished stainless steel finish and comes complete with a chrome plated brass faucet with solid brass lever. 5′ of 3/16″ clear beer tubing with nozzle and hex nut assembly and a mounting gasket with screws are also included for quick and easy setup..
  • HEAVY DUTY FAUCET WRENCH: Make repairs and adjustments to your draft beer system like a pro using this heavy-duty faucet wrench. This durable metal wrench has a vinyl coated red or blue handle that provides an easy grip while loosening or tightening shank collars, allowing you to quickly attach or remove your faucets without scratching them..
Check Stock

Ferroday Stainless Steel Core Draft Beer Faucet Polised Beer Faucet for Keg Tap Tower Beer Shank and Kegerator(Beer Faucet)

  • Beer Faucet Construction ：Won’t pit or tarnish,corrosion resistant and durable, prevent heavy metal pollution.
  • Body is made of brass,core is made of stainless steel.
  • Polished Interior: Smooth flow, less agitation and less foaming.
  • Used to attach beer and wine line to a faucet through wall, refrigerator door, cabinet, etc.
  • Package:1*Draft Beer Faucet+1* faucet handle.
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ...with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching your faucets. This wrench has been built to last with a rugged all-metal construction and convenient 5-1/4" length..
  • INCLUDES DETAILED INSTRUCTIONS: This conversion kit comes with easy-to-follow instructions and all of the draft dispense components you'll need to quickly and easily convert your refrigerator into a draft beer kegerator..
Check Stock