Top Drainage Tubing

Replacement Feet for Shower Chair Bath Seat, shower stools and transfer bench, non-skid Shower Bench and Tub Transfer Benches Rubber Suction Cup Feet, Metal Insert Reinforced (1-1/8\ I.D, Grey)

  • The inside diameter is 1-1/8 inch(28mm), The bottom is about 2 inches outside diameter. Made of durable TPR rubber and reinforced with metal insert for skid-resistant traction and longer wear time..
  • Ideal replacent tips for just about any item usde in the bathroom - universal compatibility fits most bath benches, Shower Chairs. Its unique angled legs with non-skid rubber tips allow users’ weight to be distributed over a larger area making the shower chair ultra-safe and stable..
  • Tool-free assembly makes it easy for any one in the family to assemble for use within minutes. These replacement tips are designed to perfectly fit any brand bath bench and are designed to not only add but are quick and simple to replace your old tips Fits any brand 1-1/8inch (28mm) tubing..
  • TPR rubber is durable and corrosion proof. Its unique angled legs with non-skid rubber tips allow users’ weight to be distributed over a larger area making the shower stable..
  • Wider tips with convenient drainage holes help deal with areas with excess moisture, Unique big drainage holes improve the overall sitting experience and also allow water to be drained effectively thereby reducing the risk of slippage..
Check Stock

Boxtech Fish Tank Water Change Aquarium Vacuum Siphon Water Changer Pump Sand Cleaner for Aquarium Water Filter

  • 3 IN 1 Boxtech Aquarium Cleaner: Water changer, washing sand, cleaning, it’s a multifunctional cleaning tool. Compatible with additional nozzle can....
  • Compact Structure: Compatible with 1pcs soft water pipe(72.4in) and 2pcs hard water pipes(11in*2). It is easy to install and operate. fitting....
  • Anti-Back Flow Valve Design - Widened anti-reverse pipe makes drainage more effective. Kindly Note: Please put the QV letter end downward against the....
  • Safe and Easy Use: Made of quality flexible PVC plastic which could ensure a long time use. It won't collapse to block the water flow, also, it is not....
  • Special Design: Extra long tubing & hard pipes allows you to reach any dirty spots immediately without getting your hands wet.
Check Stock

YTFLOT Wall Mounted Drying Rack 27 Pegs Lab Drying Draining Rack Cleaning Equipment Bench-top Laboratory Glassware

  • Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc.
  • Detachable Pegs: This drying rack has 52 pegs (5.1" Length each), easy to assemble and detach on your needs.
  • Two Pegboards can setup double-sided model. Please note: this is for ONE side, you must buy two of these to make them double sided..
  • Product Size:15.7*4.7*21.6"/ 400*120*550mm.
  • Built-in molded draining tray 22 inch (550mm) x 4.8 inch (120mm), with hole in the tray for drainage, supplied with 30 inch (760mm) of vinyl tubing..
  • This item can be wall mounted or used on table top. Strong PP construction. Also this product being sold are not toys, they are for education/lab use only. They are not for use by children 12 & under.
Check Stock

Ice-O-Matic KPU090 Pump Kit for Ice Maker GEMU090

  • PUMP KIT FOR GEMU090: The Ice-O-Matic Pump Kit designed for the GEMU090 Nugget Pearl Ice Machine, Pump kit installed inside the ice maker cabinet for built in applications..
  • IDEAL FOR ICE MACHINES WHERe FLOOR DRAIN IS NOT AVAILABLE: This ice bin sump pump is perfect for installation in office break rooms, doctors offices or residential homes, that might not have access to a floor drain..
  • PREVENTS FLOODING: This pump kit helps remove the water that condenses after ice melts inside the machine, preventing the ice maker from being flooded and making it easier to clean..
  • DRAINAGE: This part forces drain water to a maximum of 10 feet and includes the pump, wiring harness, and tubing. The check valve is designed to prevent repumping of drain water into the drain hose..
  • KIT INCLUDES: Pump and motor with check valve, Switch mounting bracket assembled to switch assembly, Wire harness, Pressure hose (clear), Drain hose (white preformed), Stainless Steel shield and Misc Hardware (Snap Bushing, Hose Clamps, Mounting Bolts and Screws).
Check Stock

Stainless Steel 27 Pegs Lab Glassware Drying Rack, 304 Stainless Steel Board, Wall-Mount Laboratory Drying Draining Racks, Detachable Pegs for Laboratory Utensils (Grey)

  • Detachable Pegs: This drying rack has 27 pegs, easy to assemble and detach on your needs..
  • Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc.
  • Product Size:15.7*4.7*24"/ 400*120*610mm.
  • Built-in molded draining tray, with hole in the tray for drainage, supplied of vinyl tubing..
  • Help to dry tubes, beakers, flasks, glassware, and other lab wares. With a tray hole at bottom and a outlet hose for better water drain and leak-proof..
  • This item can be wall mounted or used on table top. Strong PP construction. Also this product being sold are not toys, they are for education/lab use only. They are not for use by children 12 & under..
Check Stock

Drying Rack 27 Pegs Lab Supply Pegboard Bench-top/Wall-Mount Laboratory Glassware 27 Detachable PegsLab Drying Draining Rack Cleaning Equipment Black

  • Product Size:15.7*4.7*21.6"/ 400*120*550mm.
  • Built-in molded draining tray 22 inch (550mm) x 4.8 inch (120mm), with hole in the tray for drainage, supplied with 30 inch (760mm) of vinyl tubing..
  • Detachable Pegs: This drying rack has 27 pegs(5.1" Length each), easy to assemble and detach on your needs.
  • Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc.
  • Two Pegboards can setup double-sided model. Please note: this is for ONE side, you must buy two of these to make them double sided..
  • This item can be wall mounted or used on table top. Strong PP construction. Also this product being sold are not toys, they are for education/lab use only. They are not for use by children 12 & under.
Check Stock

YTFLOT Drying Rack 27 Pegs Lab Supply Pegboard Bench-top/Wall-Mount Laboratory Glassware 27 Detachable PegsLab Drying Draining Rack Cleaning Equipment Black

  • Product Size:15.7*4.7*21.6"/ 400*120*550mm.
  • Built-in molded draining tray 22 inch (550mm) x 4.8 inch (120mm), with hole in the tray for drainage, supplied with 30 inch (760mm) of vinyl tubing..
  • Detachable Pegs: This drying rack has 27 pegs(5.1" Length each), easy to assemble and detach on your needs.
  • Wide Application: for laboratory, medical, chemical, quality test, school, research institute etc.
  • Two Pegboards can setup double-sided model. Please note: this is for ONE side, you must buy two of these to make them double sided..
  • This item can be wall mounted or used on table top. Strong PP construction. Also this product being sold are not toys, they are for education/lab use only. They are not for use by children 12 & under.
Check Stock

Drain Pipe 1-1/2 P Trap Tubing 7.6-16.5 Inch Drainage Pipe Perforated Corrugated Expandable Flexible Landscape Drain Pipe with 2 Sealing Rings for Kitchen Bathroom Restroom

  • 【Water Seal Design】- P-type bending to form a water seal + silica gel sealing ring tightly connected to form a physical shield, which can ensuring....
  • 【Flexible and Expandable】- The drain pipe can be stretched, contracted and bent freely without deformation. It is easy to adjust the length and....
  • 【High-quality Material】- The drainage pipe is made of thick ABS engineering material, which has strong corrosion resistance, high temperature....
  • 【Easy to Assemble】- The inner diameter of the nut of the drain pipe is 1.8in/45mm, which is convenient to connect with the drain connector. The....
  • 【Wide Application】- The P trap tubing is one of the double-tank drain fittings, used to connect the drainer and the garbage disposer, and is....
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

SOG Specialty Knives & Tools Ninja Tactical Daypack Backpack, Black, One Size

  • Easy Organization: At 13 x 18 x 3. 5” with a 24. 2-liter capacity, these tactical bags have room for all the essentials! With a large main compartment, accessory pockets and a soft-lined section for electronics, gear stays organized and easy to find..
  • Great On-the-Go: From morning commutes to weekend hikes, our tactical packs have MOLLE webbing for a variety of accessories! We added a tubing port for easy access to the hydration bladder pocket, as well as a hook-and-loop for a flag patch..
  • Designed for Comfort: With padded yoke-style shoulder straps that are fully adjustable, our tactical bookbag ensures long-lasting comfort! Paired with contoured foam backing and an adjustable sternum slider, it offers both security and luxury..
  • Strong and Reliable: Made with polyester, these MOLLE bags are water-repellent and ready for almost anything! Dual bottom grommet drainage holes keep water away from your gear, while durable buckles and zippers reflect our commitment to quality..
  • Lifetime : Backed by a manufacturer’s lifetime , you can rest assured knowing our tactical gear bag is protected against defects in workmanship or materials! If you run into any problems, just let our customer service team know..
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock