Top Drawer Slide End Bracket

Prime-Line R 7211 Drawer Slide Kit Replace Drawer Track Hardware Self-Closing Design Fits Most Bottom/ Side-Mounted Drawer Systems 17-3/4 Steel Tracks, Plastic Wheels, White 1 Pair (2 LH, 2 RH)

  • INSTALL OR REPLACe DRAWER TRACK HARDWARE Whether you are installing new drawers or repairing one that wont open or close properly, Prime-Line Drawer Slide Kit fits most bottom/side-mounted drawer systems. The drawer slide kit is constructed of steel tracks with a white powder coated finish and self-lubricating plastic rollers..
  • SELF-CLOSING DESIGN The smooth-gliding tracks in the Prime-Line R 7211 kit features a self-closing design that commences at the final 2-1/2 from the end of the 17-3/4 long tracks when closing..
  • EASY TO INSTALL Installation is quick and easy, and the kit contains all necessary fasteners. Installation instructions are included and also available on Prime-Lines website..
  • 75 LBS MAX LOAD CAPACITY The maximum load capacity for the drawer slide kit is 75 lbs. and is for use in 18 deep drawer cabinets. It features a positive stop in the closed position and a double stop in the extended position that locks your drawer open, so it cannot be pulled too far out and fall off the tracks..
  • INSTALLATION TIP The clearance required between the drawer and the drawer opening for these slides is: 1/2 on left and right sides, 1/4 at the bottom and 5/8 at the top..
  • For all dimensional information please refer to the line art and compare to you....
Check Stock

Drawer Slide Jig (New Version)

  • The Universal Drawer Slide Jig is for installing drawer slides of almost any type, including ball-bearing or epoxy-coated side-mount slides and even center-mount slides!.
  • The Drawer Slide Jig takes the guesswork out of installing drawer slides. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer..
  • Press the jig against the face of your cabinet and your slide is positioned perfectly level, with the proper setback..
  • The Drawer Slide Jig simplifies drawer installation by aligning slides in the cabinet and on the drawer. Built-in tabs make the jig easy to align to support the slide inside the cabinet, and to support the drawers as you attach the slides to them..
  • The Drawer Slide Jig is designed to be intuitive for beginners to use, but robust enough for professionals. All you need are the slides you’ll use, a clamp, and the Drawer Slide Jig, and you’re set to install drawer slides just like the pros. Whether you’re installing one drawer or dozens, the Drawer Slide Jig provides f....
Check Stock

Btibpse Wooden Drawer Slides 17-3/4 Inches Classic Wood Center Guide Track with Slide Glides 45cm 1 pcs

  • Slides are 45 cm long but can be cut to length if needed, undrilled.
  • A high-tech kiln drying method eliminates warpage ensuring a quality product.
  • Smooth surface, made from beech hardwood.
  • A good center mount drawer slide.(Steel bracket slide glides are not include).
Check Stock

ROCKLER 865042 Drawer Slide Jig, Blue

  • Bundle Includes: Kreg Drawer Slide Jig and Concealed Hinge Jig.
  • Takes the Guesswork Out of the Process: Whether you're updating cabinets or you're building a project from scratch, mounting drawers is always a challenge. The slides have to be level, straight, and positioned properly, or the drawers won't operate well. The Drawer Slide Jig takes the guesswork out of mounting drawer slides by indexing with the cabinet frame (or side on frameless cabinets) for perfect alignment.
  • Smooth Positioning: The jig supports the drawer slide level and straight while you install it in the cabinet. Then, the jig clamps on so it protrudes from the cabinet to support the drawer while you drive screws into the drawer box. With this jig, you'll know that your slides are positioned correctly, so your drawers will operate smoothly.
  • Incudes Two Brackets: The Drawer Slide Jig consists of two brackets that clamp in place inside the cabinet - one on each cabinet side - and align with the cabinet face frame (or with designated marks on frameless cabinets) to support the drawer slide as you drill mounting holes. The brackets are also reversible to pro....
Check Stock

CosmoLiving by Cosmopolitan Anastasia Nightstand, White

  • 【 High Quality】This rattan night stand is 15.7x15.6x21.7in./40x39.5x55cm. It is made of MDF. The table legs are pine, solid and durable. The legs are outward slightly after installation, which improves the stability..
  • 【Natural Rattan Decor】The nightstand is completed with beautiful cane accents. Blending seamlessly with your existing decor, this accessory brings a perfect amount of stylish function to your bedside..
  • 【2 Drawers For Storage】The modern end table has spacious drawers. The drawer is 13x11x3.5in./33x28x9cm. 2 storage drawers can make your items organized and tidy. The extra large and smooth top also can place more items..
  • 【Protective Pad & Metal Slide design】The bedside table has 4 protective pads. It can prevent the floor from scratches and reduce noises when being moved. The Metal drawer slider makes it smoother and quieter to open/close the drawer..
  • 【Multifunctional】The side table could be a nightstand table, sofa table, coffee table, end table. A great addition to any bedroom or living room, coffee store. The nature color can be suitable for various styles of home decoration..
Check Stock

EVERIE Coffee Pod Holder Drawer Compatible with Keurig K Cup Pods (Holds 18 Pods)

  • Drawer is compatible with K-Cup pods. Drawer is with 3 lines, each line is for 6 pods..
  • Easy to take every pod, the end pod holes in each line is for 2 pods, very easy to put it or take out..
  • Smooth slide in or out. Strong frame does not bend over with coffee maker on top so no conflicts traps the slide..
  • 40 Lbs affordable weight on top while K575 with water fully filled is about 18 LBS. Solid frame supports the coffee maker and pods in perfect position..
  • Pre-shaped slots stop the coffee pods from falling over or getting stuck or being wobbly. Keep all yours pods in place and really organised.
Check Stock

General Tools 806 Jiffy Centering Punch, Silver

  • The Jiffy Centering Punch makes centering screw holes for hinges, locks, brackets and other countersunk hardware.
  • The tool's tapered end fits inside the hinge or bracket screw hole for automatic centering.
  • For quickly starting screw holes when attaching countersunk hardware such as hinges, hasps, hangers and drawer pulls.
  • Countersunk end ensures starting hole is centered in hardware screw hole.
  • Hardened steel pin for repeated punching and makes easily identifiable marks in wood surfaces.
  • Length: 2-1/2" (68mm). Body diameter: 3/8" (10mm).
Check Stock

Valor Fitness LM-7 Post Landmine for Olympic Barbells – with Easy Installation and 360-Degree Swivel

  • EASY INSTALLATION- Place a heavy Olympic Plate on the floor, slide the end of the LM-7 into the mouth of the weight plate, and slide your Olympic....
  • OLYMPIC SIZE- Compatible with Standard Olympic Plates and Olympic Barbells. Use with Valor Fitness Bumper Plates..
  • FULL RANGE- Accessory rotates 360-degrees for a full range of motion for a more versatile workout..
  • SOLID STEEL- Constructed to solid steel for strength and durability to hold up through the most intense workouts..
  • ADDITIONAL- Plates can be safely stacked up to 1/8 in. away from the bracket, otherwise the pivot of the bracket could damage weight plates..
Check Stock

Egg Holder for Refrigerator Drawer - Fridge Egg Drawer Organizer Fridge Egg Holder Egg Trays for Refrigerator Egg Container (1 Pack)

  • 【PULL OUT Egg Drawer】- This is 1 Pack of refrigerator egg drawer, holds 18 eggs. The extended handle makes it easy to pull in and out, which is very convenient when storing egg. The drawers slide out without removing the entire bracket. Clear material design keeps food items visible and easy to locate. Easy installation, no tools required..
  • 【Please Note】- Please make sure that the length of your refrigerator shelf is between 11.8-16.5 inches, and the thickness of the shelf must be under 0.6 inches. The fridge egg drawer size: L11.8" x W 7.9" x H 2", the upper part has a smooth spring pull rod design, which can freely adjust the length of the railing. The length of the slide rail can be extended from 11.8 inches to 16.5 inches. The egg holder can fit most standard size refrigerators..
  • 【Premium Material】- The fridge egg organizer is made of food grade PET plastic, which is BPA free, non-toxic, durable, smooth edges and safe to use. The pull-out fridge egg holder drawer keeps eggs handy and out of the way, ideal for organizing your refrigerator..
  • 【AUTOMATIC ROLLING】 - The automatic rolling curve ....
Check Stock

Prime-Line MP7148 Drawer Track Roller, 13/16 inch, Right Hand, (2-pack), 2 Piece

  • Mono-rail roller for drawer slide systems.
  • For further dimensional information, please see the line drawing.
Check Stock

Ravinte 5 Pairs 10 Pack Black 22 Inch Full Extension Ball Bearing Drawer Slides & 5 Pairs - 10 Pack Black Rear Drawer Slide Metal Mounting Brackets

  • More different packs and colors of Rear Drawer Slide Metal Mounting Brackets please click: https://www.amazon.com/dp/B09NDGCF9W.
  • [Kit Includes]: Ravinte 5 Pairs 10 Pack Black 22 Inch Full Extension Ball Bearing Drawer Slides & 5 Pairs - 10 Pack Black Rear Drawer Slide Metal Mounting Brackets.
  • [Full Extension Ball Bearing Drawer Slide]: Length:22 inch.
  • Thickness:1/2 inch. Flexible install tab and release lever make the installation and adjustment easy..
  • [Drawer Slide Mounting Brackets]: Width:1.76 inch(45mm).
  • Guide drawer track installed in face frame cabinet drawer easily..
  • [Quiet and Slow Close Drawer]: Independently located ball bearing, double spring, and piston damper make the slide operate smooth and silent. no more slamming drawer..
Check Stock

Ravinte 10 Pairs 20 Pack Black 16 Inch Full Extension Ball Bearing Drawer Slides & 10 Pairs - 20 Pack Silver Rear Drawer Slide Metal Mounting Brackets

  • More different packs and colors of Rear Drawer Slide Metal Mounting Brackets please click: https://www.amazon.com/dp/B09NDGCF9W.
  • [Kit Includes]: Ravinte 10 Pairs 20 Pack Black 16 Inch Full Extension Ball Bearing Drawer Slides & 10 Pairs - 20 Pack Silver Rear Drawer Slide Metal Mounting Brackets.
  • [Full Extension Ball Bearing Drawer Slide]: Length:16 inch.
  • Thickness:1/2 inch. Flexible install tab and release lever make the installation and adjustment easy..
  • [Drawer Slide Mounting Brackets]: Width:1.76 inch(45mm).
  • Guide drawer track installed in face frame cabinet drawer easily..
  • [Quiet and Slow Close Drawer]: Independently located ball bearing, double spring, and piston damper make the slide operate smooth and silent. no more slamming drawer..
Check Stock