Top Drill Bit For Drywall
4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster
- 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
- 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
- 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
- 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood(not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness :Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
- 5,This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check StockBA 3/16-24 Toggler SNAPTOGGLE Heavy Duty Toggle Bolt Zinc with 3/16-24 x 2 1/2 Combo Pan Machine Screws Zinc 100 Pcs
- HOLDS 2X MORE THAN WING TOGGLES - Holds up to 238 lb's in 1/2" drywall & 802 lb's in concrete block..
- REUSABLE - Doesn't fall behind wall when bolt is removed.
- MADE IN USA - Package Contains 100 3/16-24 SNAPTOGGLES & 100 3/16"-2-1/2" Bolts.
- SMALLEST DRILL HOLE - Just 1/2" (drill bit NOT included).
- USAGES - Drywall, Tile, Concrete block, Plaster & More.
Check Stock3/8\ x 18\ Bellhanger Installer Drill Bit - MADE IN USA
- 3/8" x 18" Bellhanger Installer Drill Bit High Speed Steel - Easily cuts through wood and drywall - Made in USA.
- COMMON USES - RG58, RG59, RG6, Cat5, Security Systems, HDTV, Phone Lines.
- USED BY - Cable Installers, Phone Companies, Security Companies, Electricians, HVAC, Home Owners, DIY.
- 135 Degree point angle quickly drills through wood and drywall.
- Hole in tip for pulling wires through walls.
Check StockSaipe 2pcs Adjustable Screw Depth Screwdriver Bit Holder Magnetic Steel Screwdriver Drywall Bit 1/4 Inch Hex Shank with S2 Phillips 2 Screw Driver Bits
- Made of Chrome vanadium steel, high hardness and anti-rust, giving you long lasting and maximum durability..
- The adjustable depth screwdriver bit holder can set screws in straight and to a predetermined depth, allowing for accurate working with drywall screws..
- Strong magnetic tip can hold the bits and convenient pick-up and retention of screws, work for 1/4x1” Phillips Bits.
- Versatile Use: Use for deck building, wood framing, installing plywood subfloor, building crates, etc..
- 1/4" hex shank can be easily fit into power driver, drill and handheld screwdriver. Packaged included: 2pcs Screw Driver Bit Holder with 2pcs PH2 Drywall Insert Bit.
Check StockAll New, Made for Amazon In-Wall Cable Management Kit
- Accessory designed to hide AV cables for Amazon Fire TVs and other TV brands..
- Conceal AV cables behind the wall in under 20 minutes with this DIY TV cable management kit. Includes all needed hardware in the box, just bring a drill..
- Ideal for hiding HDMI, audio, and in-wall rated power cables behind the wall. Flexible design comfortably fits 4 thick HDMI cables..
- DIY friendly design Installs in 4 simple steps. Comes with a drywall hole saw drill attachment to ensure a perfect fit..
- Locks onto the drywall for a safe & secure finish. With paintable covers, these grommets can blend into any décor..
- With Sanus, you get a top quality product backed by our us-based customer care team, which is ready to answer your questions 7 days a week..
- Included In Box: 2 Grommets, Hole Saw, Driver Bit, Instruction Manual..
Check StockGALAX PRO 5Amp 1/2-inch Corded Impact Drill with 105pcs Accessories, Variable Speed 0-3000, Hammer and Drill 2 Functions in 1, 360°Rotating Handle, Depth Gauge, Carrying Case Included
- Professional and widely use: This drill is equipped with a high torque 5 amp motor that makes it ideal for the most demanding projects.
- 105pcs accessories cover all your needs and equipped with durable carrying case for easy storage.
- Speed adjustable: Speed Setting Knob and variable speed trigger allow you to control drilling speed and set speed at 0 - 3000 RPM according to your needs.
- Lock-on button reduces fatigue for long hours work.
- 1/2 keyed metal chuck: This drill with sturdy and durable metal chuck, its maximum chuck diameter of this impact drill is 1/2''.
- Customer could replace different drill bits according to different drilling materials.
- Hammer and drill functions: Equipped with a green dual-mode selector on the top, you can easily convert between hammer and drill function by one button depending on your tasks.
- What you get: 1 x hammer drill, 20 x screwdriver bits, 60 x drywall plastic anchors with screws, 1 x extension rod, 3 x woodwork drill bit, 21 x drill bit, 1 x depth gauge, 1 x auxiliary handle, 1 x chuck key, 1 x manual, 1 x warranty card.
Check StockJIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood
- High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
- Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
- Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
- Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
- Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
- This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
- The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check StockJIECHENG HSS Bi-Metal Hole Saw with Arbor Mandrel 4-inch 102 mm for Metal,Stainless Steel,Cornhole Boards,Drywall,Plastic,Brass,Aluminum,Iron and Wood
- 4-inch Hole Saw with Mandrel and High Grade HSS Drill Bit. mainly for all kinds of woods,cornhole boards,plastic,rubber,drywall,fiberboard,PVC pipe,Plywood,also for thin soft steels,aluminium,brass.it can make the holes in 4-inch diameter..
- Cutting depth is about 38mm (1.5 inch),and total height about 44mm,the pilot drill bit is diameter of 6.3mm (1/4")..
- Notice:please take care when working, it is better with safety glasses,firstly drill in low speep,later in higher speed.the diameter in teeth is 4 inch..
- The shank of arbor is hex with 3/8"(9.5mm ) ,this is the distance between two edges. it is for 10mm (3/8'') drill chuck and bigger..
Check StockVIKITON 4 inch Hole Saw with Arbor for Metal Wood Plastic, 102mm Bi-Metal Hole Cutter for Different Project with Smooth and Flat Drilling Edge, Fast Chip Removal
- 【Sharp and Durable】The hole saw is Bi-metal construction, which has special flexible steel saw body and high speed steel cutting teeth, with longer service life, and more sharp..
- 【Wide Application】The hole saw can be widely used for cutting thin metals, wood, plater board, plywood, duct, drywall, soft plaster, corn hole boards and plastic, good enough for the average DIYer and professional project..
- 【Easy to Use】Pass the pilot drill bit of arbor through the center circular hole on the back of the hole saw, and rotate the arbor until it is tightened..
- 【High Work Efficiency】The deep gullets on the sides of hole saw provides fast chip removal.
- 【Tool Kit Includes】4 in hole saw, 1 drill bit for replacement, 1 arbor(with 1 drill bit), 1 hex key.
Check StockQWORK Twin Blade Adjustable Hole Saw - Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8\ to 8\ ( 40-200mm )
- Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic.
- Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
- Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application..
- Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up..
- Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32.
Check StockHi-Spec 99 Piece SAE Multi Drill Bit Set. 14 Sizes from 1/16in to 3/8in. Metal, Wood, Drywall & Plastics Drilling with HSS Titanium Steel Bits. Complete in a Tray Case
- DRILLING AIN’T EASY: Drilling quickly and accurately into different materials requires choosing the appropriate drill bit type. Get it done right with the Hi-Spec 99 Piece Multi Drill Bit Set. The perfect complement for those everyday drilling jobs in metal, wood, drywall and plastics.
- 99 PIECE SAE SIZES: The most-used compatible round-shank sizes of HSS metal twist drill bits needed for a range of DIY tasks – 99pc x 14 Sizes of HSS Bits: 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 7/32, 15/64, 1/4, 5/16, 3/8”.
- HSS BIT DRILLING: High-Speed tool steel (HSS4241) cuts faster, withstands higher temperatures and retains hardness for longer than ordinary high-carbon steel. Fit to electric power drill drivers and start repairs, installation, and renovation in metal, wood, and plastics.
- TITANIUM-COATED FOR LIFE: The gold-coloured vapour-deposited Titanium Nitride (TiN) coating improves bit longevity and sharpness. Get increased surface hardness and lubrication properties to improve wear resistance, reduce friction and sticking.
- KEEP IT TOGETHER: A slim storage tray case keeps bits in separate compartments with a foam insert for further protection. Sizes are printed on the case lid underside and its steel catch snaps shut to makes sure it doesn’....
Check StockTOGGLER SNAPTOGGLE Drywall Anchor with Included Bolts for 1/4-20 Fastener Size Holds 80 pounds Each in 1/2-in Drywall by TOGGLER 12 Pack
- HOLDS 2X MORE THAN WING TOGGLES - SNAPTOGGLES Holds up to 1,080 lbs in concrete block and up to 265 lbs in 1/2-in drywall (Industry standards recommend 1/4 of this ultimate load per anchor).
- REUSABLE - Metal channel will not fall behind wall - anchor is reusable and works in walls or ceilings 3/8-in to 3-5/8-in thick.
- Great for hanging flat screen TV's, grab bars, handrails, cabinets and much more. Can be used with Drywall, Tile, Concrete Blocks, Plaster, and More..
- SMALLEST DRILL HOLE - Requires a 1/2-in drill bit. (not included).
- Package contains 12 anchors and 12 bolts (Bolts are 2.5 inches) - Packaging may Vary.
Check Stock