Top Drill Chuck Adapter

QWORK Drill Chuck Converter, 2 PCS 0.3-6.5mm Hex Shank Keyless Drill Chuck Quick Change Adapter Converter with 1/4\ Hex Shank

  • Installation size: General hexagon handle input connection rod clamps 0.3mm to 6.5mm drill bit..
  • Universal Hex shank: For power drill convert impact driver to hold non-quick change drill and driver bits instantly..
  • Ideal Accessor: Thread quick change adapter with 1/4" Hex Shank, easily into the power drill..
  • Easy to use: Easily lock and release drill bits, no chuck key needed..
  • Package include: 1* Black Drill Chuck + 1* Silver Drill Chuck..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Warehouses Offices(Short tail M8x0.75 chuck + rod set)

  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
Check Stock

Drill Chuck Grinder Chuck Key M8 Grinder Rod for Car Garages(Short tail M8x0.75 chuck + rod set)

  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
Check Stock

Grinder Chuck Key Drill Chuck Carbon Steel M8 for Car Garages(Short tail M8x0.75 chuck + rod set)

  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
Check Stock

HD Chuck HEAVY DUTY 5/8' (16mm) Magnetic Drill Chuck with 3/4' Weldon Shank Adapter by BLUEROCK Tools

  • 5/8" Heavy Duty Chuck for Magnetic Drill Press.
  • 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank).
  • Please confirm your drill is compatible with a 3/4" Weldon Shank.
  • 51mm WIDE x 86mm Long (Jaws Extended) 69mm (Jaws Receded).
Check Stock

Carbon Steel M8 Easy to Use Grinder Chuck Key for 3-Jaw Mini Drill Bit(Short Tail M8x0.75 Chuck + Rod Set)

  • And grinder chuck accessory can instantly convert impact to non‑drill bits for quick exchange and drive positions..
  • These industrial tools can be widely used in car, garages, warehouses, offices, houses, etc..
  • Built to strict quality control standards, drill chuck adapter rod's design is improved for more durability..
  • Made of carbon steel, hex handle, grinder chuck accessory can be easy to install..
  • Easy to use, such drill chuck can quickly lock and release the drill bit. And its clamping range is 0.3‑3.2 mm. Without key mandrel tightening, it can be easy to replace the drill bit..
Check Stock

Garden Auger Drill Adapter, SDS Plus to 1/2-Inch(M13 x 15mm) Thread Keyless Drill Chuck Adapter Round Shank for Impact Driver,Drive Hammer Drill

  • Compatibility: Fit 10mm dia round shank to 1/2" thread adapter for drill chuck..
  • Material: Garden Auger Power Drill Adapter is made of durable steel with 4 flats on the 0.36 inch shank to match up with the chuck teeth on your hammer drill..
  • Note: If the adapter need to work with a thread locker when there for a reverse motion, you can always use a thread locker on the screw holding the two pieces together to resolve this problem..
  • Size: Overall Length: 4.1 inches, Body Diameter: 0.77 inch..
  • Application: Adaptor connects drill to Earth Augers..
Check Stock

LaBear Drill Chuck Keyless Mini 3-Jaw Adapter with Quick-change 1/4\ Hex Shank to Hold 1.5-6mm Alloy Black Drill Bits Milling Cutters

  • 【Chuck Adapter】Turns any ¼” cordless power screwdriver into a drill or grinder to quickly switch tasks and keep the job moving.
  • 【Specifications】- 1/4 inch ( 6.35 mm ) Hex shank, 3-Jaw Drill Chuck Adapter.
  • 【How to Use】- Keyless chuck converter easy ON and OFF for driving to drilling in seconds..
Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

  • DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
  • HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
  • UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
  • INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..
Check Stock

NEIKO 30275A Impact Wrench Adapter | 1/2 Drive Female to 1/4 Hex Converter | Quick Release | Quick Change Chuck | Square to Hex Bit Adapter| Impact Rated Cr-Mo Steel for Ratchet Wrenches Drivers

  • CONVERSION: Each hex to square to hex adapter /converter has duo ends. Female 1/2 inch adapter on one end and a 1/4 inch female hex-adapter on other....
  • PREMIUM QUALITY: Each impact to hex chuck adapter is made with a heavy-duty chrome molybdenum steel construction for durability and allows for the....
  • MULTI-FUNCTIONING: This impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver or impact....
  • QUICK-CHANGE: The 1/2” drive quick-release mechanism in the chuck allows for easy, one-handed swapping between impact driver bits while working.....
  • 1/4” FIT: This impact hex adapter securely holds any standard screwdriver bits in a 1/4" hex-shank bit (including insert drill bits) to eliminate....
Check Stock

SEDY 9-Pieces Impact Socket Adapter Set & Magnetic Bit Holder, 1/4\ Hex Shank with 1/4\

  • Each adapter made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, deliver on long-lasting strength and durability. Includes a 60mm long bit extension bar with magnetized ends to securely hold 1/4-inch bits..
  • Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use. Compatible with common to heavy duty power tools, drivers, hand wrench, and screwdriver handle tools for flexible uses..
  • ▲4-Pieces 1/4" adapter: 25mm length, 30mm length, 50mm length, 65mm length --- can be converted to 6.35mm square head.
  • ▲2-Pieces 3/8" adapter: 50mm length, 65mm length --- can be converted to 9.53mm square head.
  • ▲2-Pieces 1/2" adapter: 50mm length, 73mm length --- can be converted to 12.7mm square head.
  • ▲1-Pieces 2.5 Inch magnetic bit extension piece with a 1/4-inch bit end..
  • All socket-drive adapter are 1/4” hex shank, hex adapter for square drive, the 1/4" hex shank air impact driver sockets fit all quick change chucks as well as standard drill chucks, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driver soc....
Check Stock

YingMin 1.5-10 mm Capacity Drill Chuck,3/8-24UNF Drill Chuck with 1/4 inchHex Shank Quick Change Converter, drill chuck for impact driver(YM049)

  • 【HIGH-QUALITY MATERIALS】Made from premium chrome vanadium steel for durability and stands up to extensive daily use.
  • 【MULTIFUNCTION】Classic keyed 3-Jaw design securely holds a wide range of twist drills,step drill bits,paddle bits and larger circular saw.Versatile use on impact drills and electric power driver to quickly switch tasks and keep the job moving.
  • 【VALUE FOR THE MONEY】Our Drill Chuck Adapter have high precision in workmanship With high precision threaded ,The chuck can better fix the drill bit,More accurate positioning,Ensure that it does not loosen during the work process and the drilling is more precise.
  • 【PRODUCT SPECIFICATIONS】Capacity range:1.5-10mm ,Mount Thread:3/8-24UNF, 1/4" hex shank quickly connects to any impact driver and converts to geneal drilling function.
  • 【SPECIAL REMINDER】It can NOT be used counterclockwise,It must be transferred hammer drill stalls when use the hammer chuck, other stalls will lead chuck broken!.
Check Stock