Top Drill Collet Chuck

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

VEVOR Pipe Stretcher Kit, Exhaust Pipe Stretcher Kit 1-5/8" to 4-1/4", Exhaust Pipe Expander Kit for Tail Pipe Tube, Exhaust Pipe Expander Tool w/Storing Case, 7 Pcs Pipe Expander, Exhaust Stretcher

  • Exhaust Pipe Stretcher Kit: This pipe stretcher kit provides the handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters..
  • Wide Expanding Range: The exhaust pipe stretcher kit provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Easy to Operate: You only have to lubricate all parts of the exhaust expander tool, and attach sleeves as needed, and then insert pipe spreader into the pipe, and finally connect to existing drill..
  • Heavy-duty Construction: All collets are made of Aluminum alloy ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..
  • Convenient Storage: Blow-molded carrying case included for easy storing and convenie....
Check Stock

RYOBI PCK700KN ONE+ 18V Cordless 9-Tool Combo Kit with 3 Batteries and 6-Port Supercharger

  • Drill/Driver: 1/2 in. keyless chuck with a 24-Position clutch that adjusts torque output to control the depth of a screw or fastener.
  • Drill/Driver: 2-Speed gear box offers a low speed (0 - 450 RPM) for high torque applications and a high speed (0 - 1,750 RPM) for fast applications with 500 in./lbs. of torque to handle all your drilling and driving needs.
  • Impact Driver: 1/4 in. quick-connect collet provides quick and easy bit changes.
Check Stock

Round BAR Center Finder 3/8\ Shank Tool for MILLING Machine

  • Round bar center finder 3/8" shank tool for milling machine.
  • Quickly and accurately locate the center of round stock for drilling or milling with this center finder.
  • Put shaft in drill chuck or collet center and center is located when pointer aligns with line on short shaft..
  • Made from stainless steel with zero-glare satin chrome finish.
Check Stock

2Pcs 1/2\ to 1/4\ Router Collet Reduction Sleeve Tool Bit - A3 Carbon Steel Black

  • For turning electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4"..
  • Easy to install: you only need to put the product in the chuck and fix it, then you can use it, no tools or extra steps are required..
  • Material: router bit collet chuck adapter is made of high carbon steel, durable and not easy to wear, suitable for long-term use, tougher and more wear-resistant..
  • Package included: 2pcs 1/2" to 1/4" router collet reducer collet reduction sleeve tool bits,it can replace broken parts when your old parts are damaged or lost..
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

SHZOND Collet Set CNC CAT40 Tooling Package ER32 ER16 Collet Set Mill Holder Spanner Drill Chuck (collet set)

  • The collet set comes with 12PC CAT 40 ER32 collets set by 1/16 and 10PC CAT40 ER 16 collets set by 1/32.
  • All collet chuck are high speed proved,high speed true balance in 15-20K RPM.
  • Tenth Accuracy 0.0001in on each ER chuck and collet. Both ER32 and ER16 Chuck Gage or projection length of ER16 is 2.75in.
  • Hardened and ground to ensure maximum accuracy.Through spindle coolant capability from pull stud to collets.
  • Ideal for milling machine, drilling machine or holder, etc.
Check Stock

HNBun 1/32

  • HIGH QUALITY: Mt2 taper drill chuck made of durable high speed steel, corrosion and rust resistance.
  • drill press chuck compatible with impact drill and different power tool electric drill.
  • DIMENSION: Capacity 1/32" - 5/8", Mt2 Drill Chuck Overall Length: 93mm (3.7). Accuracy: 0.005", Chuck Mount : JT33.
  • PROFESSIONAL TOOL: High quality triple grip drill chuck accepts accessories with 1-16mm shanks, securely holds a wide range of twist drill bits, step drill bits, paddle bits.
  • MULTIFUNCTION: Drill chuck adapter suitable for centering, drilling, tapping, reaming operation. For portable, bench or floor type drill press.
  • WARM TIP: The mt2 drill chuck can NOT be used counterclockwise.
Check Stock

findmall 17Pcs MT3 Shank ER40 Chuck Spring Collet Chuck Set with Collets 1/8 Inch-1 Inch Set and Box Fit for CNC Engraving Machine and Milling Lathe Tool

  • Product Material: Made of high quality alloy steel.
  • great processing and fine making compatible with durability and toughness..
  • Main Parameter: ER40 clamping range: 2-26mm.
  • Drawbar end thread: 3/8inch-16. Accuracy: 0.0005inch..
  • Collet Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1inch..
  • Wide Application: The brand new precision collet chuck holder for professionals and hobbyists demanding milling and drilling applications..
  • Package Contents: 1 x MT3 ER40 Collet Chuck.
Check Stock

19pcs Flexible-Drill-Bit-Extension Set,Hex Shank 105°Right-Angle-Drill-Attachmen,3pcs 1/4 3/8 1/2" Universal Socket Adapter Set,3pcs Drill-Bits Holder.

  • ... each with 1/4" hex drill bit for all quick change chuck adapter systems: power tools/drilling tools / Hand tools etc. Multi-purpose nut driver kit, spring loaded ball bearing lock on socket kit..
  • 【3Pcs Screwdriver Bit Holders】1/4 Inch Hex Shank Magnetic Extension Collet Adapter Quick Release Rod Sleeve Screwdriver Bit Holder | 60mm/ 100mm/ 150mm length, suitable for screwdriver bits for electric, pneumatic screwdrivers and other power tools, with extended drill bits..
Check Stock

NEIKO 20754A 3/8” Drill Chuck Adapter | Chuck Drill for Impact Drivers with 1/4 Inch Quick Change Shank | Drill Converter Includes 1/2-Inch Adapter for Impact Guns | Hex to Chuck Drill Bit Adapter

  • TRANSFORMS IMPACT DRIVERS: This mini drill chuck is an easy way to adapt or convert cordless impact drivers, cordless power tools, and wrenches to do....
  • EASY ON AND OFF: Socket drive chuck adapter has a 3-jaw chuck securely holds round-shank drill bits and includes 1/2 inch adapter to quickly go from....
  • DRILL CHUCK EXTENSION: This chuck for your impact drill extends the reach of your impact drill or driver. Gives you the freedom of one-handed drilling....
  • HEX SHANK DRILL: Drill chuck for impact driver has a standard 1/4" hex drive chuck is an excellent fit to power tools and is constructed of Cr-V metal....
  • FITS A WIDE RANGE OF BITS: Hand drill adapter is the ideal capacity and clamping range for all drill bit sizes from 1/16” to 3/8” drill bits to....
Check Stock

Hakkin 6 Sizes Drill Chuck Key Wrench, 3/4\ 5/8\ 1/2\ 3/8\ 1/4\ 5/32\ Carbon Steel Heavy Duty Thumb Handle Chuck Key, Replacement Drill Chuck Key Wrench, Electric Drill Clamping Tool

  • 【Material】The Drill Chuck Key Wrench is made of solid carbon steel and coated with durable plastic, which is anti-rust, anti-slip design, reducing stress damage within a certain limit. Among 5/8" drill chuck key wrench is made of chrome vanadium steel..
  • 【Diameter】Thumb grip styles increase leverage and user comfort. Chuck Diameter: 3/4" (20mm), 5/8" (16mm), 1/2" (13mm), 3/8" (10mm), 1/4" (6mm), 5/32" (4mm). Salient Point Diameter: 0.35" (9mm), 0.31" (8mm), 0.24" (6mm), 0.24" (6mm), 0.2" (5mm), 0.12" (3mm)..
  • 【Function】Thumb handle chuck key can be used in hammer or drilling mode. The Replacement Drill Press Chuck Key is a kind of electric drill clamping tool, perfect to tighten or loosen a chuck, which allows a quick change of your drill bit heads. Note: do not hit the chuck key handle with a hammer or other impact tools..
  • 【Application】6 specifications to meet a variety of drill chuck fastening and loosening needs, can be compatible with most of power tool brands..
  • 【Storage and Use】The small key allows for easy storage and use. Applicable products: Hand drill, hammer drill. Ideal tool kit for keeping drill bits in place..
Check Stock