Top Drill Guide Sets

Muzata 30 90 Degree Angle Drill Guide Cable Railing Kit Stair Visible Drilling Template Drill Jig 4 Sizes for Straight and Angled Hole Lag Screw for Wood Post CT09,CT1

  • Accurate and Multi-Angle - This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal vertical straight holes and 30 degree angled holes for the wood railing post. You can add a whole new level of accuracy with this drill guide jig when drilling railing post holes with your hand drill. Package includes: 1pc drill guide.
  • Various hole sizes - This cable railing drill template guide jig offers 4 different size guide track holes (fit 3/16”,1/4”, 5/16”,3/8” drill bit), compatible with most cable railing kit hardware. The hole drilled by 1/4" drill fit most of 1/8" cable railings lag screws. You can fix the steel sleeves by tightening the set screws to prevent the steel sleeves from falling off during drilling.
  • Visible and Portable - The drill guide is made of transparent acrylic with excellent visibility that you are easy to position accurately on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System - To help you construct a cable railing system, we pre-designed a cable railing system named WoodBudget especially with 1/8" swage lag....
Check Stock

DEOYUEND Cabinet Clamps, Cabinet Claw Cabinetry Clamps Cabinet Installation Clamps Cabinet Tools with Two Side Screws and Alignment Plate, 2 Pack, Orange

  • ...cast steel for long-term durability and tightness..
  • 【Dimensions】The cabinet clamps work on stiles from 1-1/2 inch to 2 inch thickness(each) with 4" opening capacity.
  • 【Anti-slip Mat】Cabinet Face Frame Clamps Tools is equipped with 3 rubber protection pads for the clamping surface and the alignment plate to avoid damage to the cabinet during installation.Face frame stiles can be tightened, aligned, pre-drilled and fastened while the clamp remains in its original position..
  • 【Movable Drill Guide Hole】The drill guide hole can be moved up and down. Both sides of the drill guide hole are laser-marked metric and inch scales, to pre-drill and drill the pilot hole more accurately and effectively..
  • 【Easy to Install】 Cabinet claw can easily tighten and align the two door frames of the cabinet. With movable drill guide holes, it is easy to drill holes and screw screws at specific positions. Even if you are not a professional installer, y....
Check Stock

Muzata Upgraded Multi Angle Drill Guide Fit 25 30 35 40 45 90 Degree Cable Railing Kit Stair Visible Template Jig 4 Sizes Guide Track for Straight and Angle Hole Wood Post CT19 CT1

  • Multi-Angle and Accurate – This cable railing drilling guide jig dowel allows you to drill 90 degree horizontal or vertical straight holes and 25 to 45 degree angle holes for the wood post. Suitable for drilling holes with unconventional angles and standard angled. Package includes: 1pc drill guide.
  • Various drill bit sizes – This cable railing drill template guide jig offers 4 different sizes of guide tracks(fit 3/16”,9/32”, 5/16”,13/32” drill bits), compatible with most cable railing kit hardware. The hole drilled by 5/16″ drill fit most of 1/8″ cable railings lag screws. The fixing metal sleeve of the desired size can be replaced by adjusting the Jack bolt. The reserved gap between drill bit and metal sleeve can prevent the wear of drill bits and sleeves when drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility so it is easy and accurate to position on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden woo....
Check Stock

Aospun 3 in 1 Dowel Jig Drill Kit, Adjustable Woodworking Drill Locator Hole Punch Tool, Pocket Hole Jig Kit with Locator Clip 8/10/15mm Bits

  • PACKAGE: The Pocket Hole Jig Kit comes with 1×3 in 1 Doweling Jig Drill, 2 x drill bits (8/10mm), 1×15mm hole opener, 1× round dowel positioner( 8mm, 10mm),3x wood dowel pins, 1 x wrench, 1 x allen wrench. 3 in 1 multi-function drill guide , for drilling dowel holes and vertical holes..
  • EXQUISITE CRAFT: The pocket hole jig is precision machined from 6061 high-quality aluminum alloy, and the surface of the drilling guide locator is anodized, which is strong and durable, anti-corrosion and rust-proof, and the product has high hardness and can be used for many years..
  • EASY TO USE: 3 in 1 dowel jig with 8/10/15mm drill bit woodworking pocket drilling jig, easy to adjust drill height and hole depth, easy for anyone to use. Pocket hole connectors are ideal for leg and rail connections, as well as cabinet construction. Insert screws into narrow pinch points..
  • IDEAL ACCESSORIES：Accurately locating and drilling locating holes has never been easier with our innovative Woodworking Drill Guide Locator Fixtures. The exquisitely processed drilling guide kit is designed with a precise scale on its main body, and the scale can be adju....
Check Stock

Kingson 30 45 90 Angled Drill Guide for Cable Railing, Drill Block Guide for Angled and Straight Holes, Drill Jig with Hard Steel Brushings for Installing Deck/Porch/Stair Railings,Handrails

  • Precise 3 Angles: Our cable railing drilling guide fixture can drill 30 °, 45 ° and 90 ° angle holes for your wooden stair railing and deck column. The three angles are fixed and accurate. You can use the impact drill to drill 30 °/45 °/90 ° angle holes on the column or railing, so that you can quickly and accurately complete the drilling work..
  • 4 Different Sizes Holes: There are four drill pilot holes of different sizes at each angle on our fixture, which are respectively 3/8 "(9.52mm), 5/16" (7.93mm), 1/4 "(6.35) mm), and 3/16" (4.76mm). Different sizes are applicable to cable protective sleeves and square head screws of different diameters..
  • High Quality Material: The cable railing drilling fixture is made of high quality aviation aluminum alloy, hard and light, easy to carry, free to store without deformation. The anodized blue surface maintains excellent smoothness, corrosion resistance and full reliable durability. The guide hole of our drill bit guide is equipped with a rigid and strong steel drill sleeve, wear-resistant, durable. No need to worry about the drill sleeve hole becoming larger and losing accuracy..
  • Wide Application: The drilling guide fixture can be used with C-clamp and F-clamp to improve drilling accuracy. It is applicable t....
Check Stock

Multi-Angle Drill Guide Attachment Mobile Drill Stand Portable 45 Degree Adjustable Angle Drill Press Machine Stand Guide Rail Base

  • Adjustable angle drill machine stand is composed of rotatable double guide rods, which can be adjusted to accurately drill holes at an angle of up to....
  • Multi-angle drill guide rod itself has a spring, which can be quickly reset when repeated drilling.
  • A drill guide that can be used in horizontal, vertical or angular position, perfect for straight or angled drilling, drilling on the edge of a board....
  • With 4 screw holes, it is convenient to use as a fixed drill floor with depth limiter, easy to use.
  • Mobile Drill Stand is made of high quality steel and aluminum, strong and durable, high strength, long service life.
Check Stock

CertBuy Portable Drill Press for Hand Drill, Multi-Angle Drill Guide Attachment For 1/4 Inch and 3/8 Inch Adjustable Angle Drill Holder Guide, Portable Drill Guide with Chuck

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

CS Unitec | MABasic 850 Portable Magnetic Drill Press | 1800W 4-speed Benchtop Power Drill Machine w/up to 3-1/16" Diameter & 10" Depth of Cut | Oil Bottle Included

  • High-Quality Drill Press Stand: Our drill press stand is made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • Drill Guide Sizes: Drill diameter: 42.5mm / 1.6in.
  • Adjustable at 45 Degrees: Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • Suitable For: This drill guide fits all 1/4-inch or 3/8-inch drills..
  • Application: This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
Check Stock

Acrux7 Multi-Angle Drill Guide with Chuck, Drill Press Stand, Adjustable Angle Drill Holder Guide, Stand Drill Guide Attachment for 1/4 In and 3/8 In Drills

  • 【Use For】This multi-angle drill guide perfect for straight or angled drilling, drilling on the edge of a board or on round stock..
  • 【High-Quality and Durable】Our drill press stand made of high-quality aluminum alloy, the main structure is sturdy and durable, small in size, light in weight, and easy to carry, so you can carry it with you as you need..
  • 【Adjustable at 45 Degrees】Angle positions can go up to 45 degrees, the base has an angle scale, which can be used when adjusting the angle and rubber pads in the base hold the guide in place..
  • 【Suitable For】This drill guide fits all 1/4-inch or 3/8-inch drills..
  • 【Drill Guide Sizes】Drill diameter: 42.5mm / 1.6in.
Check Stock

Steel DN Mate 45 30 90 Degree Angle 4 Sizes Drill Jig for Angled Holes/Straight Holes, Drill Guide for Cable Railing Lag Screw Wood Post, Durable Aluminum Alloy Drilling Jig for Deck Stair Handrail

  • Aluminum alloy material: This angle drill guide is made of premium quality aluminum alloy, with corrosion resistance and durability, anodized orange surface. It is lightweight, small, easy to use and carry. We enchase the holes with steel protective sleeves, so no worry about it may crack during drilling, causing the guide holes to get broken or inaccurate..
  • Accurate 3 drilling angles: There are 3 different angles in this portable metal drill guide: 30 degree, 45 degree and 90 degree. Building a stair railing becomes much easier and more, convenient with the 30° & 45° angle holes and 90° for horizontal and vertical straight holes.A new beginner can quickly drill accurate 30/45/90 degree angle holes with a electric hand drill in the post with this tool, time-saving and perfect finish..
  • 4 different sizes of holes: This cable railing drill template guide jig offers 4 different size holes, 3/16” (4.76mm), 1/4”(6.35 mm), 5/16”(7.93mm), 3/8”(9.52mm), which are compatible with most cable railing hardware. The hole drilled by 1/4” fits most 1/8″ cable railings lag screws..
  • 4 Application: This drill guides for portable drills is widely use to  install of wooden, and metal deck railing posts for cable railings and DIY woodworking/Handrail proje....
Check Stock

Genmitsu 30pcs PCB Drill Bits Set, 0.1mm-3.0mm, 1/8″ Shank Spiral Flute CNC Router Bits for Print Circuit Board Jewelry CNC Engraving, PD30A

  • High Quality: The PCB drill bits set are made of high-quality tungsten carbide steel alloy, which is high wear resistance, high hardness, anti-impairment. Seismic design on the blade edge enables it to stay stable during engraving..
  • bits diameter: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.4mm, 1.5m, 1.6mm, 1.7mm, 1.8mm, 1.9mm, 2.0mm, 2.1mm, 2.2mm, 2.3mm, 2.4mm, 2.5mm, 2.6mm, 2.7mm, 2.8mm, 2.9mm, 3.0mm. This Set contains 30 different size drill bits diameter, each size having1 pcs..
  • Advantage: With spiral flute cutting edge, these PCB drill bits can reduce cutting force and prevent the drill from broken and improve accuracy. They work quickly and cleanly, with no glitches or scrap left..
  • Application: Suitable for amber beeswax, printed circuit boards, 3D printer nozzle cleaning, plexiglass, bakelite, CNC engraving, jewelry, plastic, and other precise drilling. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
  • 30-piece Combo Set: There are 3 sets of drill bits (Set A: 0.1mm-1.0mm.
  • Set C: 2.1mm-3.0mm), each of 10 pieces, and eac....
Check Stock

35mm Concealed Hinge Jig Kit,Suitable for Face Frame Cabinet Cupboard Door Hinges,DIY Tools for Cabinet Door Installation,Woodworking Boring Position Locator Tool Kit

  • 【Multi purpose】：NEW 35MM Concealed Hinge Drilling Jig Hole Guide Set DIY Tools. This tool makes the door easy to install, simple to use with any....
  • 【High Precision Drillin】：Suitable for 35mm hinges and also available with 26mm hinges. It comes with a 35mm bit and depth stop. It has function....
  • 【Easy to install and use】：Make cabinet door installation easy! Get drill press accuracy with any hand drill.suitable for your own home....
  • 【High Quality Material】Made of high quality environmental protection metal and engineering plastic, this hinge hole drill guide are durable, which....
  • 【High Accuracy】Reliable drilling with bit guide and stop collar. Make cabinet door installation easy! Get drill press accuracy with hand drill.
Check Stock