Top Drill Mills

Annular Cutters 8pcs/Set,2''Cutting Depth,3/4''Weldon Shank,(9/16,11/16,13/16,15/16,1,1-1/16)inch Cutting Diameter Annular Cutters,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2 pcs Pilot Pins

  • Annular Cutter Kit includes 6 pcs high speed steel annular cutters,2"Cutting Depth,Cutting Diameter(9/16", 11/16'', 13/16'', 15/16'', 1“,1-1/16) and 2pcs pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

ACTOOL 1-1/4\ Diameter × 2\ Depth of Cut HSS ANNULAR Cutter with 3/4'' Weldon Shank

  • CARBIDE TIPPED CUTTER- Premium carbide is brazed for superior strength, durability and wear resistance. 1-15/16’’ Diameter x 2’’ Depth of Cut annular cutter include free Pilot Pin..
  • EFFICIENT & PRECISE- Cut holes in steel quickly, precisely and safely. It can cut holes in steel up to 10X faster than standard twist drill bits..
  • EXCELLETN DESIGN- Triple-Cut geometry provide efficient cutting, fast feed rate, less vibration, smooth hole surface and long tool life..
  • WIDELY USE- For smooth and easy cutting almost all types of steel, including materials that are extremely difficult to cut such as stainless steel, titanium, hardened steel and rail steel..
  • UNIVERSAL FIT- 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
Check Stock

Hougen 12006 12,000 Series Annular Cutter Kit 5/8, 3/4, 7/8, 1, 1-1/8\ 2-Inch Depth of Cut 3/4-Inch Weldon Shank For Magnetic Drills

  • 1/2" Diameter x 2" Depth of Cut include free Pilot Pin.
  • Made of tough M2 High Speed Steel for longer tool life, superior heat treated for maximum durability..
  • Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting..
  • 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form..
Check Stock

Annular Cutters Set 13pcs,2'Cutting Depth,3/4''Weldon Shank,(7/16,1/2,9/16,11/16,5/8,3/4,13/16,7/8,15/16,1,1-1/16)inch Cutting Diameter Annular Cutter,OSCARBIDE HSS Slugger Bits,Mag Drill Bits for Magnetic Drill Press with 2pcs Pilot Pins

  • Annular Cutter Kit 2" cutting depth,includes 11 pcs high speed steel annular cutters,Cutting Diameter(7/16",1/2",9/16",11/16",5/8",3/4",13/16",7/8",15/16",1",1-1/16") and 2 pilot pins..
  • OSCARBIDE Annular bits will drill large holes up to ten times faster than regular drill bits,and the mag drill bits are thin-walled and have dual alternating teeth for efficient and aggressive cutting that is easier than traditional hole saws and twist drill bits,It can drill a much larger hole and requires less force and time..
  • These annular ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • OSCARBIDE annular cutters sets 3/4" Weldon shank with 2 flats,fits most standard magnetic drills and machine tools such as mills and large drill presses with tool holders.
  • These annular cutters are suitable for working with both ferrous and non-ferrous metals,cast iron, stainless steel, aluminum, copper, and plastic,wood, in either plate or pipe form.Hole processing field such as engineering,rail transit, bridges, ships, machinery manufacturing, aerospace. Mild & Structural Steel.
Check Stock

Industrial Tools Annular Cutter Arbor, Fauge Annular Cutter Arbor with Morse Taper MT2 for 3/4 Inch Weldon Shank Annular Cutters Extension on Drill Press

  • 1-1/4" Diameter x 2" Depth of Cut include free Pilot Pin.
  • Made of tough M2 High Speed Steel for longer tool life, superior Heat-Treat for maximum durability..
  • Cut holes in steel quickly, precisely and safely. It is much more efficient than regular drill bits. Ideal for clean and burr-free cutting..
  • 3/4" Weldon shank with 2 flats - fits most major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Can widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form..
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. ....
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

Northern Brewer - Hullwrecker 2-Roller Grain Mill with Metal Base and Handle

  • Perfectly milled grains, ease of use and superior dependability. Look no further than the Hullwrecker grain mill..
  • Fully adjustable roller gap from 0.025” all the way to 0.1”, allowing you to finely tune the crush to your extract preference..
  • INCLUDES a custom-designed all metal base that fits perfectly on any standard 5 or 6.5 gallon bucket. Other grain mills expect you to provide your own base..
  • Other features include a 7lb capacity grain hopper, sealed roller bearings (not bushings), and an ergonomic comfort-grip crank handle..
  • Hullwrecker can also be driven by an electric drill..
Check Stock

Jancy Slugger by Fein - HSS Nova Annular Cutter Set Tool with Premium M2 High Speed Steel - 3/4\ Straight Shank, 2\ Depth, 7/16\ - 1-1/16\ Diameter, 11 pc. Set - 63134999020

  • PREMIUM MATERIAL - Made of tough high speed steel material, good toughness and high heat resistance, sharp and sturdy and longer service life..
  • APPLICATION MATERIAL - Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • ANNULAR CUTTER ADVANTAGE - The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material, has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • WIDE APPLICATION - Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • PACKING INCLUDED - Includes 11 cutters ( Cutting Diameter:7/16.
Check Stock

Annular Cutters Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth 7/16 to 1-1/16 Cutting Diameter HSS Slugger Bits for Magnetic Drill Press with 2 Pilot Pins

  • Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Made of tough high speed steel material, with longer service life and high heat resistance..
  • Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • Includes 6 Cutters ( Cutting Diameter：7/16, 9/16, 11/16, 13/16, 15/16 & 1-1/16"), 2 pilot pins & 1 plastic tool carrying case..
Check Stock

Annular Cutter Set 6pcs JESTUOUS 3/4 Inch Weldon Shank 2 Inches Cutting Depth 1 to 2 Cutting Diameter Two Flat HSS Slugger Bits for Drill Press with 2 Pilot Pins

  • Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • Made of tough high speed steel material, with longer service life and high heat resistance..
  • Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • Includes 6 Cutters ( Cutting Diameter：1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 & 2"), 2 pilot pins & 1 plastic tool carrying case..
Check Stock

Annular Cutter Set 13 pcs JESTUOUS 3/4 Inch Weldon Shank 2 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins

  • 1.Annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders..
  • 2.Made of tough high speed steel material, with longer service life and high heat resistance..
  • 3.Applicable materials include various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc..
  • 4.The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips..
  • 5.Includes 11 cutters ( Cutting Diameter:7/16.
Check Stock