Top Drilling For Construction

Happybuy 8 Inch/205MM Diamond Core Drilling Machine 3980W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 8 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 3980W copper motor. Maximum Speed: 750RPM. Maximum Coring Diameter: 8"/205 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy 6 Inch/160MM Diamond Core Drilling Machine 2180W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 6.3 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6.3"/160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

VEVOR Core Drill Machine 305 MM 12 Inches Core Drill Rig Powerful Rugged Diamond Concrete Core Drill 110V 500 r/min Core Drill Rig Tool Wet Dry Concrete Brick Block Drilling 4800W 45 Degree Rotation

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced co....
Check Stock

VEVOR 12Inch/305MM Core Drill Machine,4800W Core Drill Rig,Powerful Rugged Diamond Concrete Core Drill,110V 500r/m Wet Dry Concrete Brick Block Drilling Machine (Drill Bit Diameter:4.5'/114MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

IRWIN 1890945 Flexible Installer Drill Bit with High-Speed Steel Tip, 3/8-Inch Shank, 24-Inch Length

  • Unique combination of 135 Degree self-centering split point stepped to 118 Degree hole enlarging body for fast, easy starts and smooth drilling.
  • Hole in flute for easy wire pulling through walls, ceilings and floors.
  • 3-flatted shank prevents slipping in drill chuck and includes hole for wire pulling.
  • Tapered flute for faster chip ejection, less binding and smoother drilling Does not apply to 1/4" diameter SKUs.
  • Premium high speed steel construction for extended drilling life in metal, wood and plastic.
Check Stock

480W Electric Bench Top Drill Press Bench Drill Drilling Machine Electric Mini Drill Press Stand for Metals, Wood, Plastic, Aluminum Plate (480W)

  • 【Product Parameter】This is electric bench drill press machine, rated power: 480w, rated current: 0.55a, table size: 17 cm x 17cm, drilling diameter: 1-10mm, max spindle travel: 40mm. The spindle is about 110mm away from the drill bit center..
  • 【Long Life】480-watt motor construction adopts imported bearings, high temperature, and full copper wire processing, shell adopts nylon plastic processing. Which extends the life of the machine..
  • 【High Quality】Bench drill drilling machine with high quality drilling, easy operation, good stability. Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency..
  • 【High Efficiency】The motor has increased power, which is to increase the life of the motor. High-power miniature portable bench drill precision drilling machine motor. No-load speed：i: 0-5000r/min, ii:0-11000r/min. Drill capacity: woods:φ25mm, iron：φ7mm..
  • 【Wide Application】Bench top drill press is suitable for drilling, expanding and reaming operations on metals and other materials. It can be widely used in a single-piece or mass-produced instrument industry, machinery manufacturing, and repair parts..
Check Stock

Valvoline Multi-Vehicle Moly-Fortified Gray Grease 14.1 OZ Cartridge

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
  • DRILLER RED GREASE: This NLGI #2 Red Grease protects heavy-duty drilling, industrial, mining, and construction equipment from wear and corrosion..
  • FORMULA: This heavy-duty red grease has a Lithium Complex base formula for superior protection and lubrication..
  • APPLICATIONS: Driller Red Grease is ideal for drilling and mining applications, backing plates, ball and chassis points, construction ball & roller bearings, idler bearings, industrial applications, U-joints, water pumps, wheel bearings, and more..
  • SPECIFICATIONS: Driller Red Grease is available in a 14 wt oz. cartridge..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

uxcell Square Hole Drill Bit, 1/2" High-Carbon Steel Hollow Chisel Mortise Power Tool for Woodworking

  • 【SIZE】1/2" (12.7mm) square chisel width, 75mm cutting depth, 205mm total length..
  • 【TIP AND EDGE】The best-designed drilling point tip and 4 cutting corners enable fast drilling with small opening resistance, and penetrating into working pieces of wood in precise opening size very smoothly and fast..
  • 【MATERIAL】Made of High-carbon steel, through heat processing, with high hardness (48-50 HRC) drill bits, and sharp-edged square chisel, durable and lasts long..
  • 【ADVANTAGE】With long drill core and square chisel, easy to lock the hole on the wood, can reduce labor intensity of construction workers, speed up the construction speed, reduce construction costs..
  • 【OPERATION】Used with mortise and tenon machine with double effect, and electric drill, hammer and other tools is required for punching square hole in wood..
Check Stock

Metabo HPT Rotary Hammer | SDS Plus | 1-Inch, 7.5-Amp | For Drilling | Chipping and Hammer Drilling (DH26PF)

  • SDS Plus Rotary Hammer for drilling, chipping, and hammeriing.
  • MOTOR: 7. 5 Amp motor that produces 2. 4 ft/lbs of impact energy for powerful hammering with fast drilling.
  • POWER: 0-4, 300 full-load impact rate delivers forcible hammering.
  • APPLICATIONS: Ideal tool for plumbing and conduit installation, HVAC and pest control installation, electrical installation, construction and repair work and other civil engineering.
  • drilling only, hammering only and hammer drilling for flexibility within a range of applications.
  • SPEED CONTROL: Electronic variable speed control gives the tool a no-load RPM of between 0-1, 110 and 0-780 in reverse.
  • ANGLE ADJUSTMENT: Available on mode selector dial to change the chisel bit to different angles.
  • LIGHTWEIGHT: Only 6. 7 lbs and compact for better maneuverability and less fatigue.
  • HANDLE: Double-molded 360 degree side handle for comfortable operation and better control.
  • EASY BIT REPLACEMENT: One-push bit mounting makes changing out bits quick and easy.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ...drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require HEAVY DUTY SDS+ bits for reliable anchoring and sturdy holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All SDS-Plus Rotary Hammers.
Check Stock

Fowler 52-475-050-0, All-Angle V-Block and Clamp with 1.3125\ Capacity

  • Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins.
  • Machinist Tool: V-block set has four 3/8"-16 tapped holes, two in the bottom and one on each side for angle non-clamping.
  • Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling.
  • Dimensions: This V-clamp is 3-5/8" long, 1-7/8" wide, and 1-7/8" high (including clamp) with a holding capacity of 1-5/16".
  • High Accuracy: Sides are parallel and V is central and ground to .0003".
Check Stock