Top Drilling Hammer

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

The Rotary Hammer

  • ✔️【POWERFUL MOTOR】 12.5Amp industrial motor with 5.2 feet /lbs（7 joules)impact energy is designed to complete heavy duty concrete and metal....
  • ✔️【HUMANIZATION DESIGN】 Safety clutch protection designed to guarantee your wrist When the hammer is subjected to high torque force. 360°....
  • ✔️【THREE FUNCTIONS】 Three different functions of drill only(suitable for wood, steel , etc.), hammer only(suitable for concrete or brick) and....
  • ✔️【DRILLING CAPACITY】 The max drilling diameter for concrete is 1-1/4 inch and for metal is 1/2 inch. ENRH3203 rotary hammer drill can reach....
Check Stock

1200W 1-1/4\ SDS-PLUS Bits Rotary Hammer Drill 13 Amp Heavy Duty Demolition Hammer 3 Functions with Vibration Control Safety Clutch

  • ...】: Integral clutch reduces sudden and high torque reactions if bit jams, avoiding overloading the machine and cuts power if you hit reinforcements, ensuring safe operation for the users during the heavy-duty projects as well as protecting the motor's lifespan..
  • 【TWO KNOB W/ THREE FUNCTIONS】: Three functions of Drilling (used for drilling material such as wood, steel, etc.)/ Hammer drilling (used for drilling concrete, granite, brick,rock)/ Chiseling (For chipping work on some hard materials), which are suitable for various work situations. You can quickly switch the three functions of the rotary hammer drill by two different switches. The dual-function switch design can prolong the service life than the single-function switch design..
  • 【COMPACT & COMFORT DESIGN】: Users feel more comfortable and suffer less fatigue thanks to the 360° adjustable handle grip design which brings maximum power thrust. And the SDS-Plus system provides a convenient way to change the switching bits without any tools. Whether you are a male or a female, you can efficiently complete various drilling tasks..
  • 【TOOLKIT INCLUDES】: Rotary Hammer Drill*1.
  • Drill Bits*4 (6mm,8mm,10mm and 12mm), Point Chisel*1, Flat Chisel*1, Replaceable Carbon Brush 1 set, User's Manual*1, ....
Check Stock

Chiloskit Rubber Drill Dust Collector Cover Dustproof Cover Electric Hammer Cover Electric Drill Power Tool Accessories

  • Electric Hammer Rubber Dust Cover Cap for 6-14mm Drill Bits.
  • Can be used to drill wall and so on.Electric hammer dustproof cover can effectively prevent dust diffusion and inhalation to protect your lungs..
  • To prevent dust from dirtying your clothes in the process of drilling.Material: Rubber. Easy to install and clean, just one minute to complete the....
  • Use a dust-proof cover to avoid breathing dust in the process of drilling.
  • Application: Electric hammer,electric drill.6 - 12 mm 1/4 - 1/2 inch, suitable for electric hammer, electric pick, percussion drill, hand drill and so....
Check Stock

VEVOR Hammer Drill, 13A Rotary Hammer, 1.26' SDS Rotary Hammer Drill, 4-Mode Combination Rotary Hammer, 1500W SDS Plus Hammer Drill, 850RPM Cordless Rotary Hammer w/Case, 110V Rotary Hammer Drill Kit

  • Powerful Motor: 13 amp industrial motor with 5.5 feet /lbs (7.4 joules) impact energy is designed to complete heavy-duty concrete and metalworking projects. Wattage: 1500W. The drilling capacity of rotary hammer drill: 1inch/26mm for concrete, 1.6inch/40mm, 0.5inch/13mm for steel..
  • Four Functions: SDS hammer drill's four different functions: Drilling is suitable for wood, steel, etc. Chiseling is ideal for concrete or brick. In addition, hammer drilling is ideal for heavy-duty work, and chisel position adjustment adapts to various work scenarios..
  • No-load Speed: Our rotary hammer can reach 850 r/min no-load speed and 4200bpm max impact frequency. Various applications can be completed by adjusting the trigger..
  • Humanization Design: The 360° adjustable handle can be applied to different work, and the upgraded vibration control system is designed to decrease the vibration effectively. The detachable depth gauge allows you to determine precisely how deep the drill bit should be..
  • Wide Application: Reliable SDS plus hammer drill is suitable for professional or daily home users. The combination rotary hammer will make it an easy job, no matter remove tiles or demolishing brickwork. Besides, tools are well stored and sorted in a compact case..
Check Stock

BOSCH HD18-2 Two-Speed Hammer Drill 1/2 Inch

  • Powerful 8.5 amp motor for high-torque and high-speed drilling capabilities.
  • Auxiliary handle with built-in depth gauge securely locks into place and provides consistent drilling depth.
  • Integral slip clutch - more user security because it disengages the output shaft should the bit get into a bind situation.
  • Securely clamping 1/2-Inch three-jaw chuck for rugged hammer-drilling applications.
  • Dual-mode selector easily converts from rotation-only to hammer-drill mode.
Check Stock

Freeman PECCKT 20 Volt Cordless Hammer Drill 20 Volt Cordless Impact Driver and LED Light Combo Kit with Rechargeable 2 Ah Lithium-Ion Batteries and Quick Charger

  • Hammer Drill: Ideal for drilling holes in harder surfaces such as concrete, brick, stone, and other masonry.
  • Hammer Drill: Brushed motor delivers up to 530 in.-lbs. of torque with a free speed up to 1,700 RPM to the 1/2" chuck.
  • Hammer Drill: 21 position clutch and 2 speed gearbox provide variable torque and speed performance.
  • Hammer Drill: 3 modes for switching between hammer, driving, and drilling applications.
  • Impact Driver: Designed for driving long screws or carriage bolts into support beams and wooden posts, driving screws into metal studs, and fastening....
Check Stock

KSEIBI Variable Speed Rotary Hammer Drill 1-1/4 inch, SDS Plus Demolition Hammer for Concrete Drill 13Amp, 4 Functions Reduced Vibration System

  • MAX POWER PERFORMANCE L-shaped SDS drill with a powerful 13 Amp motor with 7 Joules Impact Rate with SDS Plus function let you finish any projects on Masonry, Concrete, Brick, Stone etc. or you can use the extra chuck for normal shank for metal and wood jobs, 0-900RPM, 0-4350BPM, The Heavy Duty Drill has drilling capacity: 1-1/4 inch for concrete, 1-9/16 inch for wood, 1/2 inch for steel..
  • FOUR FUNCTIONS Use the knob hammer drill switch to switch between Demolition Chisel Hammer Drill to make holes with rotary drill SDS bits, Electric Hammer Chiseling both positions ideal for projects on Concrete, Brick, Granite, etc., and normal Drill Position ideal for drilling and making holes in wood, metal, aluminum, etc. the last function Position Adjustment help you to chose the chisel position makes your job easy, you can use adjust depth gauge to preselect drilling depth for blind holes..
  • VARIABLE SPEED pre-selection speed wheel to set the right speed for every job attached to HEAVY DUTY Soft-grip Handle for comfortable handling and optimal control with Vibration Reduction System ensures optimal working comfort and low vibrations side handle for secure two-handed control and low vibrations while using the electric chisel hammer.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Hitachi DH22PG 7/8-inch SDS Rotary Hammer (Discontinued by Manufacturer)

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Powerful 5.4-amp motor provides fast drilling in common 5/32-inch and 3/16-inch diameters.
  • (2) modes of operation for simple selection between drill only and hammer-drilling.
  • Compact and lightweight for use in tight spaces or overhead operations.
  • 2 modes of operation. Drill only and hammer-drilling..
Check Stock

Metabo HPT Rotary Hammer, 8.4-Amp Motor, 1-1/2-Inch Spline Shank, Adjustable 360 Degree Side Handle (DH38YE2)

  • Rotary Hammer with 1-1/2-Inch spline shank.
  • MOTOR: Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity.
  • POWER: Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete.
  • APPLICATION: Great for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.
  • LIGHTWEIGHT: Only 14.1 lbs for less fatigue.
  • MODES: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob.
  • LOW VIBRATION: Only 18.8m/s2 (full load) for more comfortable operation in hand.
  • LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment.
  • SAFETY: Safety clutch shuts down rotation in the event of a bound bit for improved user protection.
  • HANDLE: Adjustable 360 degree side handle provides better control and can be removed easily.
Check Stock

Makita XPH14Z 18V LXT® Lithium-Ion Brushless Cordless 1/2" Hammer Driver-Drill, Tool Only

  • Makita built BL Brushless Motor delivers 1,250 in.lbs. of Max Torque.
  • Compact and ergonomic design at only 7" long.
  • 2-speed transmission (0-550 & 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications.
  • 0-31,500 BPM for faster hammer drilling in masonry materials.
  • All metal 1/2" self ratcheting chuck for improved bit gripping strength and durability.
Check Stock