Top Drive Shaft Thread Repair

4 Pieces Long Shaft Clock Movements Clock Hands Mechanism High Torque Mechanism with 5 Different Pairs of DIY Clock Repair Parts Replacement for Clock Repair Replacement

  • DIY clock repair kit: you will get 4 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit....
  • Size details: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, they are equipped with sweeping motion,....
  • Wide application: these clock repair replacement parts are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and....
  • 5 Different styles of hands: this clock mechanism replacement set comes with 5 pairs of clock hands in different styles and length for your options,....
Check Stock

SSM-16HR Oven Microwave Turntable Motor Carousel Synchronous Motor AC21V 3W 2.5/3 RPM WB26X10143、6549W1S011B(1 PCS)

  • Part Number: Non-OEM,Microwave with "D" shaft Turntable Drive Motor(Shaft Diameter: 7mm/0.28in, Shaft Length: 9mm/0.35 in) SSM-16HR....
  • Electrical parameters: AC frequency: 50/60HZ voltage: 21AC power: 3W speed: 2.5/3r/min rotation direction: CW/CCW class: E When purchasing, please....
  • Replacement part number: WB26X10143 replacement (6549W1S011B, SSM-16HR, ).
  • Suitable brands/models: GE ST16FE EX73SAAA3 WB26X10143 and LG 721.63252301 721.63254301 MPDJ030BF JES35BJ JES738WJ02.
  • The drive motor is located under the glass microwave turntable. Before starting this repair, make sure to disconnect the microwave power. Just use a....
Check Stock

2Pcs Clock Mechanism - Clock Mechanism Replacement - Quartz Clock Movement Replacement,Clock Kit Motor Replacement Mute Design DIY Repair Clock Parts with 5 Set Clock Hands No Battery

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit....
  • Size: the total shaft length is approx.16 mm/ 0.63 inches, and the thread length is approx. 9 mm/ 0.35 inches.
  • Jump second movement is suitable for 5....
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no....
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and....
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • ...ng and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, g....
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands DIY Clock Repair Parts Replacement

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: jump second movement is suitable for 9-13 mm/ 0.35 - 0.51 inches thickness of clock panel, the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 13 mm/ 0.51 inches.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

High Torque Long Shaft Clock Movement Mechanism with 2 Different Pairs of Hands (Color Set 1, Shaft Length 9/10 Inch/ 23 mm)

  • Clock parts kit: high torque I shaft clock with metal hook, the shaft can drive long clock hands (10 mm to 450 mm), suitable for repairing, replacing or making a clock.
  • SA0856 SA1036 SA1054: Clock mechanism size: total shaft length is approx. 23 mm (9/ 10 inches), thread length is 15.4 mm (3/ 5 inches).
  • Jump second movement, suitable for 9 - 13 mm (9/ 25 - 1/ 2 inches) thickness clock panelSA1026 SA1035 SA1053: Clock mechanism size: total shaft length is 20 mm (4/ 5 inch), thread length is 11.7 mm (9/ 20 inch).
  • Jump second movement, suitable for 4 - 8 mm (4/ 25 - 3/ 10 inch) thickness clock panel.
  • Clock hands kit: package includes 2 pieces of minute hands and 2 pieces of hour hands, easy for installation.
  • Simple and elegant design, these replacement parts suit well to different styles of clock frame.
  • Hole center to the tip hand size: the hour hands are approx. 90 mm/ 3.5 inch and 93 mm/ 3.7 inches respectively, minute hands are approx. 120 mm/ 4.7 inches and 127 mm/ 5.0 inches, the second hand is approx. 100 mm/ 3.9 inches, second heads is approx. 7 mm/ 0.28 inches.
  • Warm note: when you install this clock movement kit, please keep the hour hand and minute hand parallel, and please check the sizes before purchase.
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (20 mm, Gold)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches.
  • Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

2 Pieces High Torque Long Shaft Clock Movement Mechanism with 5 Different Pairs of Hands Clock Repair Parts Replacement (28 mm/ 1.1 Inches)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx. 28 mm/ 1.1 inches, and the thread length is approx. 20 mm/ 0.79 inches.
  • Jump second movement is suitable for 13-18 mm/ 0.51- 0.71 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

Quartex Spacekid & Andre Wildenhues Extended

  • Long spindle quartz clock replacement movement parts with metal hook,Good for repairing, replacing or making a clock..
  • Parameter: "I" Shaft,drive long clock hands (10 mm to 450 mm).
  • Total shaft length is 18 mm (45/64 inch), thread length is 5 mm (13/64 inch),suitable....
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick....
  • Package contents: 1 clock movement with 1 hook,2 Hour hands,2 Minute hands and some mounting hardware, coming with specially designed box and....
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

2 Pieces Clock Movement Mechanism Clock Hands High Torque Long Shaft Clock Movement Replacement with 5 Different Pairs of Hands Clock Repair Parts Replacement (13mm.18mm)

  • DIY clock repair kit: you will get 2 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, good for repairing, replacing or making a clock by yourself.
  • Size: the total shaft length is approx.16 mm/ 0.63 inches, and the thread length is approx. 9 mm/ 0.35 inches.
  • Jump second movement is suitable for 5 - 9 mm/ 0.2 - 0.35 inches thickness of clock panel.
  • Accurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, equipped with sweeping motion, no ticking and will provide you with a quiet environment.
  • Wide application: these clock repair replacement parts fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts.
  • 5 Different styles of hands: this set comes with 5 pairs of clock hands in different styles and length for your options, great for clock creations and repairs while also providing a decorative effect.
Check Stock

FR Recliner Handle Extension Tube Drive Shaft 5.15 inch Length for 5/8 inch Lever

  • This cardan shaft can help you improve the control performance of toy cars and also repair expensive equipment..
  • Its installation and removal methods are very simple, high accuracy, and good compatibility to ensure that it meets the specifications of the original equipment..
  • Our parts are well-made and are remote control car universal shafts specially designed for 1/14 four-wheel drive toy cars of WLtoys 144001..
  • The shaft is made of high-quality materials, which is durable and wear-resistant, and has a long service life. You can use it with peace of mind..
  • It can be directly used to replace the old universal joint shaft accessories, effectively extending the life of the toy car..
Check Stock