Top Drop Down Lid Hinge

Douper 200N Gas Struts Heavy Duty Soft Close Lid Support Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs Pack of 2

  • GENTLY CLOSE DESIGN — Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers.
  • HOLDS LID OPEN — These hinges will hold your lid open until you push it down. Never worry again about having to prop the lid open.
  • STRONG ENOUGH — Douper 200N heavy duty gas struts can support maximum 30lbs lid and lower gently.
  • Weight support will be doubled with 2 hinges (60lbs/ 2pcs).
  • 75°-105° OPEN ANGLE — Each lid hinge can be used for right or left hand mounting, keep the hinge installed for 75°-105° adjustable opening angles, depending on actual situation. Note: NO adjustments on placement measurements of the hinge mounted on side board..
  • WARM TIPS — Douper hinges will not applicable with the lid at width more than 50” and height over 25”. And must with a 9 inch clearance. Hinges will not work if your lid doesn’t match specified dimension and weight requirement.
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock

Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

  • STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch..
  • EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation..
  • LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

Ravaver Toy Box Hinges Soft Close, 26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs (Black)

  • GENTLE CLOSING: All-New hydraulic slow-down mechanism for improved stability and safety. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers.
  • STRONG SUPPORT: For lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs.
  • LOCK LID OPEN SECURELY: Hold your lid open at max 90 degrees until you are ready to push it shut. Never worry about having to prop the lid open.
  • ONLY TAKES 5 MINUTES TO GET INSTALLED by following the placement measurement card. Note: one hinge for left-hand mounting, and the other one for right-hand mounting.
  • BEFORE PURCHASING: Do not support the lid at width over 45in and height over 28in. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 40” Pound Lid Support Hinge Soft Close Hardware for Cabinets – Bronze Lid Hinge Support - Cast-Zinc Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding additional hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of these heavy duty hinges ensures that the seat top raised position is at an over-center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock, & are super easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps of furniture, cabinet, cupboard, or wooden storage boxes when a soft closing is required. Hin....
Check Stock

Lid Stay 105 Degree Open with Soft Close Lid Support for Toy Box and Upward Top-Opening Flap Doors Pack of 2

  • LID STAY WITH SOFT CLOSE FOR TOY BOX-- The Lid stay is made of nickel plated steel and plastic, and 2 pcs lid-stay support the range of door weight....
  • LID STAY SLOW CLOSING ---Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates....
  • KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are....
  • COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a....
  • EASY TO INSTALL LID SUPPORT-- Updated install instructions can be downloaded in Amazon page. Easy to follow installation instructions ensure a perfect....
Check Stock

80 Degree Cabinet Door Hinge, Kitchen Cupboard Door Hydraulic Hinges Folding Sofa Bed Spring Hinges

  • Close QuieltyHigh quality mechanism which slowly pulls the door closed for a smooth silent motion.cantilever hinges.
  • Spring Connection pieceHigh toughness spring connection piece, durable and sturdy.drop down hinge.
  • High QualityHigh strength carbon steel constructed hinges are of good anti-rust function and strong load-bearing capacity.pull down rack hinges.
  • Cabinet PanelCabinet Door Hinge works for door thicknesses 16mm to 40mm. Can adjust the opening angle of 130-170 degrees by adjusting the screw.scissor hinges.
  • Widely UseThis spring hinge can be widely used for folding sofa, bed, lift up opening cabinet door, etc.
Check Stock

[4-pack] Heavy Duty Lid Stay Hinges QBOSO Folding Lid Support Hinge,Perfect for Cabinet,Closet ,Wardrobe or Toy box 110 Degree Heavy Duty Style

  • 【Wide application】:The lift and up hinges are well made and designed to support the lids of box, such as mini toy box, cabinet,closet,wardrobe lids, the enhanced version has the advantages of strong bearing capacity..
  • 【Adjustable for different weights】:the lid hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slid down gently without smashing fingers..
  • 【Material】:Made of premium quality zinc alloy with maximum corrosion resistance and durability. The box lid support guarantee high performance: Max-weight 35 lbs when use 2 pcs.（up to 17.5lbs – 1 Lid Stay）.
  • 【Perfect for any lids or flaps】:when a soft closing motion is required ,each soft close hinge can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75°,90°,110°..
  • 【Package】:4 pcs lid hinge,allen wrench and exclusive design Installation instruction are included.We will send you a new one if the lid stay hinge have any quality issue..
Check Stock

Total Control BBQ Stainless Hinge & Gasket Kit for Weber Smokey Mountain WSM Smoker Grill 18.5 22.5

  • High Quality Stainless Hinge and Gasket Combo! P/N LL-WSM-GH.
  • Superior construction, removable lid (quick release) MADE IN USA.
  • Kit includes multiple gaskets, hinge, hardware, adhesive & instructions.
  • Works excellent to control temperatures, and improve efficiency.
  • Great for competition, no need to set the lid down.
Check Stock

Strut Your Stuff - Funky And Teasing

  • LID STAY 105 DEGREE WITH SOFT CLOSE- Safety & easy to solution for toy box lid and kitchen cabinets, your lids will soft close and gently to avoid....
  • KEEP LID HINGE STAY OPENING- Never worry again about having to prop the lid open. This lid support can hold the lid open until you are ready to close.....
  • EASY TO INSTALL TOY BOX HINGE- Only takes 5 minutes to complete the installation of lid hinge by following the installation measurement. Easy to....
  • COMPACT DESIGN OF LID STAY HINGE- The compact design allows for installation in tight areas. The lid hinges supports opening the lid at a maximum....
  • 100% MONEY-BACK GUARANTEE - If you are unhappy with the product for whatever reason we will refund you, no questions asked!.
Check Stock

2 Pcs Toy Box Hinges Soft Close - Lid Support Hinges Heavy Duty Adjustable Metal Lift and up Hinges Cabinet Door Support Hinge

  • 【Material】Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 40 lbs when use 2 pcs（up to 20lbs - 1 Lid Stay）.
  • 【DURABLE LID SUPPORT HINGE】each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75°,90°,110°,self adjust, easy to use..
  • 【Adjustable for different weights】With wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers. (in most cases，turn right to increase load capacity).
  • 【Multipurpose Lid Support Hinge】These elegant form of support hinges are well made and designed to support the lids of small box, such as toy box,cabinet,closet,wardrobe lids,The arm with graceful body curve adds classic luxury to your furniture..
  • 【Package】2 pcs lid stays,allen wrench and screw are included.
Check Stock

Bench Seat Hinge for Toy Chest Heavy Duty No Slam Safety Torsion Hinge Lid Support Stay Hinge

  • 2 in 1 HINGE AND LID STAY/SUPPORT HINGE in 1 piece. No metal visible on outside of your toy chest or bench.See installation images..
  • HIGH RAISING: This metal lid support is specially designed for safety purpose and design of hinge ensure that seat top raised position is at over- center 95-degree angle to prevent lid from falling unexpectedly..
  • HEAVY DUTY: Maximum lid weight of this hinge is 30 lbs to keep your lid from slamming, so this heavy duty lid support is ideal for industrial use like storage containers and trunks..
  • SAFE AND SECURE: This soft close hinge is specially designed to prevent pinched fingers, so it will never slam shut to your child. This specially manufactured lid support won't let the lid fall..
  • BUILT-IN FEATURE: This metal no slam lid support features a built-in stopping mechanism which prevents seat top from slamming on fingers. This built-in stopper makes this lid support more secure and ensures that lid is stable after opening..
Check Stock