Top Dso To Work For

DSO138 Oscilloscope, DIY Mini Oscilloscope DSO-138, 2.4″ TFT 1MSPS Digital Oscilloscope Kit Handheld Pocket Sized 13803K (Welded Version)

  • 【WIDELY USE】DSO 138 Oscilloscope With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay). Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
  • 【EXCELLENT QUALITY】This oscilloscope With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off..
  • 【PRODUCT FEATURE】DSO 138 Mini Oscilloscope uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function)..
  • 【NO NEED SOLDERED】DSO 138 oscilloscope circuit boards components are pre-soldered, no need soldered by yourself..
  • 【DIY DESIGN】Adjustable vertical displacement and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users..
Check Stock

DS213 Mini Handheld Digital Oscilloscope with 4 Channels 100MSa/s Sampling Rate

  • Upgrade Version: DS213 is the latest oscilloscope in the family of SainSmart DSO oscilloscope. Compared with DSO203, DS213 upgrades its analog....
  • Color Display: The bright color display presents any measured AC current, including sine, square, sawtooth, and triangle waveforms..
  • Simple to Use: Operation is simple and easy, using taps and swipes much like any smartphone..
  • Portable: Its small form factor conveniently fits inside any pocket so it's always ready when you need it..
  • Easy Saving: The built-in 8 MB flash storage makes saving and transferring waveform images easier than ever..
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

Dorhea DSO 150 Digital Oscilloscope Kit with Protection Box Color 2.4″ TFT LCD Full Assembled with Allicator Chip Cable Probe and Case Cover, Sensitivity for Oscilloscope DIY Kit

  • DSO 150 kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″””” color TFT LCD (320×240) display and optical encoder for navigation..
  • Auto/normal/single trigger modes, easy to capture the moment waveform. use 9V DC power charger (NOT Included)..
  • Convenient to capture the instantaneous waveform. 2.4-inch color TFT display, waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value. with secondary development on the basis, can be changed to voltmeter, data loggers..
  • Used for secondary development on the basis of this kit, it can be changed to millivoltmeter, data loggers with instructions, easy to install and operate..
  • waveform storage function: waveform will not lose when save/tune out the waveform/shutdown waveform, available rising or falling edge trigger, observable previous waveform before trigger (negative delay), can freeze waveform display at any time (HOLD function)..
Check Stock

JYETech ‘DSO Shell’ Oscilloscope DIY Kit w/Enclosure & Clip Probe by Nooelec. Low Cost Digital Storage Oscilloscope with 2.4″ TFT LCD. Model DSO150 (DSO 150); SKU 15001K

  • Includes everything you need to build your very own oscilloscope! A clip probe, plastic enclosure, and full product documentation are included..
  • DSO150 (15001K) kit is an upgrade to the popular DSO138 scope kit. Contains a 2.4″ color TFT LCD (320×240) display and optical encoder for navigation.
  • We strive to send the most current revision available. The current PCB version shipping for this listing is revision ‘E’, which has a variety of enhancements over previous versions. For more information on product changes, please visit the product page on NooElec’s or JYETech’s website.
  • Counterfeit versions of this product are available from other Amazon sellers. NooElec is an authorized distributor of JYETech products, which can be verified through their website or your device serial number. Warranty and support service through JYETech is included in your purchase.
  • 24/7 support service. We speak your language! Please contact our support team if you have any questions about your product, technical or otherwise.
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

AUKUYEE Updated 2.4\ TFT Digital Oscilloscope Kit with Power Supply and BNC-Clip Cable Probe Q15001 (Assembled Finished Machine)

  • ...C current measurement function, accurate display of DC-AD waveforms. Automatic waveform capture function, display hold, save / read up to 10 waveforms and 100 sets of readings, with panel calibration technology, more reliable, since the calibration factor is set inside and there is no need to adjust potentiometers..
  • DSO Trigger Mode: Auto/Normal. DSO Automatic Measurement: VPP, Vmax, Vmin, Vavg, Vrms, Frequency.You can lock and save the waveform of a non-periodic signal..
  • 5 Colors test leads: The 5 colors test leads are handy for keeping track of wires when testing multiple things, helping you distinguish one from another visually. Alligator leads are handy for most light electronics works such as experiments, breadboarding, prototyping or diagnosing faulty safety switches..
  • Automatic shut-off & LED backlight & Screen: When the device is not in use, it automatically shuts down after 15 minutes (can be used according to personal habits).
  • Color screen and backlight allows you to easily read the data in any environment..
Check Stock

WOODS OEM 19161KT (19161-2 Blade Set) 25" Genuine Replacement Blade Kit, Compatible OEM 2162L Batwing and More - Precision, Heat-Treated, Alloy Steel, Lawn Mower Blades

  • COMPATIBILITY INFORMATION: The WOODS 19161KT OEM 25" Blade CW 19161 is compatible with 2162, 3240, BW10.50, BW10.60, BW10.70, BW126, BW126 3, BW1260, BW15.50, BW15.60, BW15.70, BW15LH, BW180, BW180 3, BW1800 Batwing Rotary Cutter DS10.40, DS10.50, DS120, DS126, DS1260, DS1440, DS8.30, DS8.50, DS10.50, DSO1260, DSO8.50 Multi Spindle Rotary Cutter in order to ensure a smooth and reliable experience..
  • WOODS OEM MOWER BLADES: Manufactured exclusively to Woods’ superior standards, heat-treated, alloy steel blades provide maximum performance and precision cutting applications, such as large lawns, parks and sporting fields.
  • BATWING CUTTERS: Our Batwing cutters are a flexwing rotary cutter designed to be more durable and reliable while being easier to use and maintain. With features like driveline lift assist, easy open metal shields, quick change blade pins, and rounded wings, it's clear why this the Batwing has been an industry leading rotary cutter for over 50 years..
  • PRECISION AND QUALITY: For those who demand a professionally groomed lawn, Woods high-performance finish mowers ensure a clean, crisp, manicured appea....
Check Stock

kuman DSO 138 DIY Oscilloscope Kit Opening Source 2.4

  • Dso138 2. 4" Tft 1msps digital oscilloscope kit for DIY it's easy to solder..
  • Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly.
  • It uses 2. 4-Inch tft lcd (320 x 240 dot-matrix, 262K colors) as its display element and displays nice.
  • Detailed assembly instructions are provided in combination with troubleshooting guide and schematc..
  • 7-24 friendly customer service provided..
Check Stock

Instek MDO-2102A - 100 MHz/2 Channels Oscilloscope with Spectrum Analyzer

  • 200MHz, 4-channel, DSO, Spectrum analyzer, dual channel 25MHz AWG, 5,000 count DMM and power supply.
Check Stock

Hantek CC-65 AC/DC Current Clamp Meter Transducer for Digital Multimeter Oscilloscope with BNC Type Connector

  • Hantek amp clamp AC/DC frequency range: Up to 20 kHz.
  • hantek cc65 Effective Measurement Range: 20mA to 65A DC.
  • The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO.
  • Hantek CC-65 amp clamp is Friendly in use: turn on, clamp it over a conductor, and get a reading.
  • The current probe is with Output: BNC connector.
Check Stock

JVC KD-X260BT Digital Media Receiver Featuring Bluetooth/USB / Pandora/iHeartRadio / Spotify / 13-Band EQ,BLACK

  • Bluetooth audio streaming w/Simple Secure Pairing Convenient One-Touch listening with NFC technology App Remote with voice control for select smartphones.
  • CD Player Voice Control Siri Eyes Free and Android Sound Synchronized Illumination High Pass/Low Pass Filter: 80/100/120 High Voltage Pre Out: No.
  • Front USB/AUX Input USB MEDIA TRANSFER PROTOCOL: Yes USB ANDROID OPEN ACCESSORY PROTOCOL : Yes (2.0.
  • EXTRA BASS: Yes (1,2) DSO (DYNAMIC STAGE ORGANIZER): No OUTPUT POWER: 4 x 55W PRE OUT: Rear+Sub SUB OUT: Yes.
  • Subwoofer Direct Connection 18FM/12AM Presets RDS: Yes Key Illumination: Yes LCD Display Built-In Microphone.
Check Stock