Top Dual Color Injection

American Standard 2922A105.020 Townsend Vormax Elongated One-Piece Toilet with Right Hand Trip Lever, White

  • VorMax flushing technology cleans two times better than conventional toilets.
  • Right height elongated siphon action bowl.
  • High efficiency, ultra-low consumption (1. 28 gpf/4. 8 lpf), utilizes 20% less water.
  • Clean curve rim eliminates rim area where dirt and build-up hide.
Check Stock

Orion Motor Tech Fuel Pressure Test Kit | Fuel Pressure Tester Tool Set Dual Fuel Pressure Gauge and Adapter Set for Mechanic Fuel System Tests

  • PROFESSIONAL FUEL PRESSURE TESTER: Orion Motor Tech's fuel test gauge kit includes an easy-to-read dual gauge and all the hoses, fittings, and....
  • ACCURATE READING: The 4-inch fuel pressure gauge tester features a shockproof rubber casing and a large dual-scale dial with readings in both psi (to....
  • QUALITY MATERIALS: All the connectors in this fuel injection tool set are manufactured from high-quality brass and aluminum for durable strength and....
  • PRECISION ENGINEERING: The fine threading and sealing rings give you a snug fit every time, while the pressure release valve and long drain hose....
  • QUALITY ASSURANCE: Look to Orion Motor Tech for the finest craftsmanship and the most reliable fuel injection testing tools, rigorously tested and....
Check Stock

KICKER 43CVR104 10” CompVR Sub, 43CSC654 6.5” CS-Series Speakers (2 Pair), 43CXA6001 CX-Series Amp, Remote and Wire kit

  • ...mpVR 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. Features/Specifications: Kicker 43CVR102 10" 700 Watts Peak/350 Watts RMS Dual Voice Coil 2-Ohm Car Subwoofer. Size : 10". Power Handling: Peak :700 watts. RMS : 350watts. Recommended power range : 200 - 350 RMS. Injection molded SoloKon cone. Ribbed Santoprene Surround.
  • Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 5-1/2". Mounting Diameter : 9-3/16". Sensitivity : 83.6dB @ 1w/1m. Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 0.8 cu. ft. Maximum Sealed Enclosure : 3 cu. ft..
  • Minimum Ported Enclosure: 1.25 cu. ft. Maximum Ported Enclosure: 1.75 cu. ft. Subwoofer Design : Round/Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Weather resistant - Suitable for marine use in additional to car applications..
Check Stock

Pioneer Pro DJ (XPRS115S)

  • 12" 2-piece Injection Molded Polypropylene (IMPP) Cone Structure.
  • Dual layer fiber reinforced elastic polymer surround.
Check Stock

Goldwood Sound GW-206/8 OEM 6.5″ Woofer 180 Watts 8ohm Replacement Speaker

  • ... high-temperature dual Kapton voice coil resists corrosion. Works in any time of enclosure – sealed, vented, or open-air.
  • CHROME-PLATED PLASTIC BASKET: Features bumped vented extended pole piece and designed with a non-fatiguing suspension to keep equipment safe. It is a clean-cut car subwoofer that boasts a blue injection-molded cone & blue chrome-plated plastic basket.
  • 4.28” MOUNTING DEPTH: Easy to install w/ 4.28″ mounting depth & 8.8″ overall diameter, fits most audio system for cars, boats or RVs. The flat progressive spider design improves the speaker’s mechanical stability, increasing the life of the speaker.
  • Blue Injection Molded Cone – Flat Progressive Spider – 600 Watt Max Power Handling – Mounting Depth: 4.28”.
  • Non-Fatiguing Big Rubber Suspension – New Wave-Like Rubber Gasket – Impedance:4 Ohm (Per Coil).
  • Bumped Vented Extended Pole Piece – 1.5” High Temperature Dual Kapton Voice Coil – SPL: 83.5dB.
  • Silver Plated Terminal – Magnet Weight: 60 oz – Overall Diameter: 8.8”.
Check Stock

JES Innovations 200 ml 1 1 and 2 1 26 1 High Thrust Dual Component Cartridge Gun

  • Professional dual component cartridge gun with 26:1 high thrust ratio, perfect for applying 2-part materials such as epoxy and injection foam, and....
  • Engineered to deliver materials smoothly and precisely, it is easy to use and produces great results.
  • Comes ready to use with 200 ml 1:1 dual cartridge. Easily convertible to use with 200 ml 2:1 dual cartridge with included hardware.
  • Made with heavy duty metal barrel, handle, rod, plate and treated with premium finish, it has the durability to satisfy even the most demanding....
  • Includes hardware for converting cartridge capacity. Use with dual cartridge adhesives with 200 ml capacity.
Check Stock

0-140 PSI Fuel Injector Pump Injection Tester Test Fuel Pressure Gauge Kit Car Tools,Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools for Cars and Trucks

  • ▲ Universal Design:The included adapters, hoses and fittings cover all fuel injection systems and most cars, auto and vehicles..
  • ▲ Ideal For Mechanics:Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste..
  • ▲ Durable: Designed for repeated use with high quality materials,Anti-corrosion materials to ensure long lasting using life..
  • ▲ Easy Installation and Help to indicates if fuel pump is defective or inconsistent in pressure flow..
  • ▲ It is a fuel injection pump pressure,oil combustion spraying pressure gauge tester,Easy to read dual scale gauge,A carry case for protable taken and so conveninet..
Check Stock

Lichamp Fuel Pressure Gauge, Fuel Pump Pressure Test Kit with Pressure Tester Adapter and Hose, B1BK

  • FUEL PRESSURE TESTER - Automotive fuel injector tester kit tests fuel supply & injection system problems, help to judge if there are broken internal components or faulty oil lines..
  • WIDE COMPATIBILITY - Suitable for most gasoline engines on car, truck, SUV, motorcycle, ATV, RV. NOT FOR diesel high pressure injection pump or direct-injection engine, INCOMPATIBLE WITH EFI, CIS or TBI System, INCOMPATIBLE WITH Ford 1/4" Small Schrader Fitting.
  • UP TO 140PSI / 10BAR - Provide with dual scale accurate readings 0-140psi (0-10 bar), easy to read and provide you more precise and accurate readings.
  • ALL IN ONE SET - Equipped with various adapters and hoses to connect for testing, great for 1/4" standard Schrader valve and M6/M8/M10/M12/M14 service port. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles..
  • LONG LASTING MATERIALS - Designed for repeated use with high quality materials (Brass, Steel, Rubber, Plastic), rugged and long-lasting. Excellent air-tightness and avoid any leaking.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

ASUS ROG Maximus X Hero LGA1151 (Intel 8th Gen) DDR4 DP HDMI M.2 Z370 ATX Gaming Motherboard with onboard Gigabit LAN and USB 3.1

  • Designed exclusively for 8th generation Intel Core processors to maximize connectivity and speed with Dual M.2, Gigabit LAN, front panel USB 3.1 and Intel Optane Memory compatibility.
  • 5-Way Optimization with Auto-Tuning and FanXpert 4 automatically tailors overclocking profiles to your unique build for maximum OC performance and dynamic system cooling.
  • Unmatched Personalization with ASUS exclusive AURA Sync RGB lighting, two additional RGB headers, addressable RGB header and 3D printing mounts.
  • Two Patent-pending SafeSlots feature an injection molding process that integrates metal framing for a stronger, firmly anchored PCIe slot built for heavyweight GPUs. Operating System: Windows 10 64-bit.
  • Industry-leading 8-channel HD audio with dual headphone amplifiers and ROG exclusive SupremeFX S1220 CODEC driven by Japanese capacitors. NOTE: Refer the User Manual before use. CPU Temperature changes color with CPU load.
Check Stock

Orion Motor Tech Fuel Pressure Gauge Fuel Injection Pressure Tester with 140PSI 10Bar Scale Professional Fuel Pressure Test Kit for All Fuel Injection Systems and Most Cars Trucks Vans and ATVs

  • UNIVERSAL FUEL PRESSURE TESTER: Orion Motor Tech's fuel test gauge kit includes an easy-to-read dual gauge and all the hoses, fittings, and adapters....
  • ACCURATE READING: The 4-inch fuel pressure gauge tester features a shockproof rubber casing and a large dual-scale dial with readings in both psi (to....
  • QUALITY MATERIALS: All the connectors in this fuel injection tool set are manufactured from high-quality brass and aluminum for durable strength and....
  • PRECISION ENGINEERING: The fine threading and sealing rings give you a snug fit every time, while the pressure release valve and long drain hose....
  • QUALITY ASSURANCE: Look to OMT for the finest craftsmanship and the most reliable fuel injection testing tools, rigorously tested and backed with our....
Check Stock

Acerbis Full Plastic Kit Black for KTM 450 SX-F 2016-2018

  • 1.Injection Mold Fairing Fit for HONDA 2005 2006 CBR600RR.
  • 2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ full tank cover+ rear seat cowl+ black unpainted inner pieces.
  • 4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
  • Holes and tabs are built into the mold and align to Factory Settings.
Check Stock